Jump to content
SAU Community

Recommended Posts

Hey guys.

I just transplanted an RB25DE (with VCT) in my S. This new engine under load has a strange metallic noise around two and three thou RPM, more like two metal parts being in contact and resonating. It always occurs around 2-3K then goes away. It seems to settle down slightly when the engine reaches operating temp. The noise is the same even with VCT solenoid disconnected.

The noise appears to be coming from the exhaust, yet I removed all shields and is still there. Noise could transmit though from the engine.

The spark plugs are very clean and white, so there seems to be no valve problems. The car accelerates and idles very smoothly. Fuel consumption for this new engine seems to be higher than what it should be (although these issues may not be linked).

Any ideas to what it may be and how to fix?

Thanks in advance =]

Link to comment
https://www.sau.com.au/forums/topic/170221-rb25de-metalic-resonating/
Share on other sites

no idea what it sounds like... but if it is what i think you're trying to describe then it's a typical inline 6 twin cam characteristic... the m3 has a slight metallic raspy sound (and yes i have heard one in full song in real life) - and although not comparable, it is quite distinct.

try to put a sound file up... easier to diagnose

could be either one of ur mufflers have collapsed. or your cat. hit them to see if it rattles that or check for loose bolts or washers

Done that.. Exhaust is fine. Nothing rattles.. no loose bolts.. only thing I found once I took off the sheilding was a small rock. Muffler and cat have no noise at all.

Ill try getting a sound file :O

Im going with eugene, mine sounded terrible till i got a proper exhaust put on it, its a twin cam thing, do a search on exhausts in this section to get a better idea of muffler, resonator and pipe diameter to fix the problem. I also learned the other day, like a resonator a pipe can be added perpendicular to ur normal exhaust just to act as another expansion chamber.. honda uses this to deal with the twin cam resonance.

Unfortunately I cannot import a sound clip from my phone to my copmputer.

Is there anywhere I can hear a 25DE engine? On a video or sound clip to compair the two?

As per before.. just sounds like metal clipping.

It could be your gearbox. I ran my car with the rubber gear boot off once, and the noise was extremely loud and it was obviously coming from the gearbox. Nothing to worry about. Could see if changing your oil improves it. Check that your gear boot is fitted properly.

It could be your gearbox. I ran my car with the rubber gear boot off once, and the noise was extremely loud and it was obviously coming from the gearbox.

But why would the resonating be between 2-3 K? If it was the G-box.. wouldnt it be throughout all RMP range? And Im pretty sure its from the engine. When we opened the G-box it was in pretty good nik. It seems like its comming from the engine and all simptoms seem to point that way. Thats why Im so freaked out about it.

I have that sound too. Ill try get a sound file now.

Much appreciated brother bear!

But why would the resonating be between 2-3 K? If it was the G-box.. wouldnt it be throughout all RMP range? And Im pretty sure its from the engine. When we opened the G-box it was in pretty good nik. It seems like its comming from the engine and all simptoms seem to point that way. Thats why Im so freaked out about it.

no. it hits its natural frequency at this rpm range, hence making the noise.

I have the same noise with my r32 gts25, it has the rb25de as well and is making the metallic noise around the same rev range. I have only just started noticing it within the past 2 weeks( have had my licence for a month now lol)

my exhaust seems to be running quite hot as well, but not hot enough for the exhaust overheat light to come on.

Ill check my cat and exhaust out on the weekend anyway.

Ps i have an auto gearbox and flushed it out as well as the torque convertor and replaced with new fluid but still sounds the same.

YES!..

But without the sexual exhaust note..

Got my papa bear to drive it today.. its freakin LOUD!.. the metalic resonating is just like the one you showed.. but just much louder and somehow.. nastier sounding..

I take it by the replies that its just a normal sound?

It has a stock RB20DET exhaust with the slightly bent R33 25DE connector from the headers to the exhaust flange. Does anyone see anything wrong with this?

Much appreciated sound clip :)

What size is your exhaust GTS4WD anyway now that you did the transplant?

I transplanted a Rb25DE from a 4wd Stagea into my R32 GTS4 which had an RB20DET. It has a stock 20DET exhaust. The only difference is that I used an R33 connector pipe from a RB25DE to connect the headers to the stock RB20DET exhaust.

  • 3 weeks later...

if anyone still cares.. This metalic resonating is a common problem in early RB25DE's.. It causes absolutely no damage to the engine/exhaust.. The only way to get rid of it is a cat/exhaust/muff.. or bear they annoying very loud rattle..

Advan (in Syd) + 1 point!

The way it was explained to me is that:

"all engines make noise due to moving parts/rpm/mods etc..

Most engines sound different, they have different mechanical characteristics and that makes them sound diff..

early models of the RB25DE have that loud metalic raspy resonance due to the way the engine was designed"

Its a shit load louder than a raspy cams sound.. Got a mate to drive it the other day so i could hear it from the outside..

its LOUD! i mean FREAKING LOUD! it resonates through the whole exhaust and is amplified and expeled out the end.

In the later Rb25DE's there was a small flap that was kept closed at row rpm and opened at WOP and higher RPM to help keep the noise of it to a minimum.

An exhaust/muffler will cancel the sound, hence there arnt any/rarely do modded 25de's have the sound. Couple it with a new exhaust, and it disapears completely.

So yeah, its just a natural characteristic that 25de's have. Its similar to cams on full symphany, but a million times louder, and out the exhaust.

Theres no mechanical defect with the engine/exhaust. It causes no damage and will not harm the engine.. its just there..

hope this little bit of info helps anyone in the future..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
    • Hi,  Just joined the forum so I could share my "fix" of this problem. Might be of use to someone. Had the same hunting at idle issue on my V36 with VQ35HR engine after swapping the engine because the original one got overheated.  While changing the engine I made the mistake of cleaning the throttle bodies and tried all the tricks i could find to do a throttle relearn with no luck. Gave in and took it to a shop and they couldn't sort it. Then took it to my local Nissan dealership and they couldn't get it to idle properly. They said I'd need to replace the throttle bodies and the ecu probably costing more than the car is worth. So I had the idea of replacing the carbon I cleaned out with a thin layer of super glue and it's back to normal idle now. Bit rough but saved the car from the wreckers 🤣
    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
×
×
  • Create New...