Jump to content
SAU Community

Recommended Posts

1stly what to thank Marsss for the cruise meet point idea as i have copied your pizza cruise route down to a tee, hope you dont mind.

Well as a few of you know I was involoved in some filming for a documentry.

Well the doco company want more footage of multiple cars so I'm organising another cruise.

Meet: Chatswood Chase Underground Car Park, Enter off Victoria Ave

Time: 8:30pm, Leave by 9:00pm

Destination: Newport Beach

Bring: CB's, a full tank of fuel.

I will be also doing a small meet up st homebush P6 for anyone interested that will be a 7:45 for a 8 or just after leave. I wont be at this meet up, so just look for my mate with the 68' Turbo Crown Stationwagon.

Also once you enter the car park at chatswood stick left and you should see other cars. You need to get a ticket to get into the carpark, but its 3 hours free so don't worry about that.

The idea of the doco is just the relationship between guys and their cars, not hoons doing dumb ****.

After the last friday that we went filming, we are after a similar turnout of around 20-30 cars just so we can show of the car scene in a good way not the hoon way that it is mainly portrayed in the media. Other forums this is posted on are Toymods, OzMagna and the supra forums so all in all a good group of ppl.

So it would be great if we could get some numbers

Cheers, Jase

Link to comment
https://www.sau.com.au/forums/topic/170397-tv-cruise-friday-june-15th/
Share on other sites

hey jase!

where is my cop light lol???????? mate i will be there with bells on an nothing else if there are going to be cameras! wooo hooooo!

you going to come to the great northern this thursday for monthly dinner?

you going to come to the great northern this thursday for monthly dinner?

Mate i'd be there, but i'll be in brisbane by thursday afternoon, driving up for autosalon that day :P i'll be at the usual thursday night meet the following week

sounds like fun

will try and have car ready for then :(

wuld love to show everyone the good side of skylines and other tuned cars.......

This is exactley what we want to do, we don't want any hooning just wanna show off the social side of cars and car clubs



  • Similar Content

  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...