Jump to content
SAU Community

Recommended Posts

  • Replies 126
  • Created
  • Last Reply

Top Posters In This Topic

$1300 for a brand new intercooler including piping and free delivery.....Great Price!! :-)

Count me in for a 70mm core intercooler for an R32 GTS-t.

I will have the money buy the end of July.....as long it IS the end of July (3 pays between now and then!!)

PM me if a deposit is needed earlier. Thanks

Ok guys. For those of you who definately want these kits, drop us a fax order (get the order form from our website - www.nismo.com.au) or come in and put down payment or deposit and we can get the first batch of these coolers done up.

This offer can only stay open untill the end of July :)

I'm pending at this point.

My interest isn't the worry, just the cash (isn't it always?)

Money tree out the back died.

How about the re-fitment of my Blitz BOV, as it currently resides on the pipe between the FMIC I'm running now and the throttle body. The stocky is unplugged. Extra cost?

How about the cost of new piping from the throttle body to the place where the kit you are offering starts, so I can eliminate the stock piece of garbage and have you's mount the Blitz one along there somewhere?

Thanks for your help, it's a top deal and I hope I dont miss out.

ZERO.......... I will be fitting mine when I get it. I will be doing it at my brothers place on the central coast, as the guy he lives withs brother has a hoist at his workshop 5mins drive from there house if we need it!. Im willing to help ya if you trust me with cutting implements!!!:D

Sorry peoples. Been flat out. Nick re: Blitz BOV. Will have to check set up to quote on fitting your BOV. I would assume that there would be extra cost involved but should be minimal. Extra cost involved for instalation of the pipework running across the top of the engine would not really warrant the gain you will recieve. Can still do but will have to work out price with john. (sorry for useless info but will suss out).

Zero- Fitted cost for front mount fridge on your car $1700.00 ($400.00 fitting). Or you can go with the Balangalow axe murderer (joking XEQTOR). Not a hard job, just a bit daunting to get right with cutting the bar etc if you havn't done before. Takes our techs an average of 5 hrs to do (and they have installed heaps of them), so leave yourself approx a day to fit one properly.

$200.00 deposit is cool.

Can the guys at UAS organise to get the pipes HPC coated (for extra cost obviously)? I'm located in Perth and noone does thermal coatings here.

Would love to minimise any heatsoak (on the return pipe over the engine especially).

If they can organise that, definitely interested in the FMIC kit.

Does the intercooler have some brackets on the bottom to support it, or just the tab at the top?

Ta

Conrad

I am interested in this too - Do we have enough for the 10 person discount ? (Funds/Deposit by the end of July is fine with me) - And I'll be picking it up too

QUESTION: will this kit fit in the back seat of an R33 ?

(No Not permanently - just for transportation ... hehe)

I'm thinking about the 90mm core version, but would need to know how efficient the core is to make that decision...Do you have any honest figures ? Otherwise I'll probably be content with the 70mm core...

Bl4ck32: I'm in Adelaide too and I have sent a fax off to UAS to place my order and to pay a $200 deposit. Go to their website at Unique Autosports and download an order form. Make sure you put a note on it to say that it is part of the group buy.

Ring them up and speak to John if you have any questions. I spoke to him today and they have been pretty busy with stocktake stuff over the last couple of days.

I also confirmed that shipping will be free!! Gotta love that! :) Can't wait until the end of July.....just need to get a few more bits and pieces and then get someone to install it all for me.

Hey man, I just spoke to someone there and he rekons its about $100 freight to Adeliade?

How do I pay the deposit though? The man reckons a money order, (cause I dont do credit), so do I get one for a hundered bucks or so, then sent it to them?

How long before we get it, if we order say in the next few days?

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
    • Very good news...I contacted Racebox about it last night. My car is a 2016 so remains to be seen if it is compatible, requires a TCU swap, or is impossible.
    • What ECU are you running? This is probably the biggest question. If it's a PowerFC, I'd probably change the ECU and get something newer that will handle the injectors in a nicer way.
×
×
  • Create New...