Jump to content
SAU Community

Recommended Posts

I just put a set of these in my R33 and they are so good. Dont waste your time with cheap crap...it not worth it. Such a nice ride and when on softest setting, they are great for sydney roads!

So very very happy!

Edited by frozenwaffles
Link to comment
https://www.sau.com.au/forums/topic/170724-hks-hypermax-ii-coilovers/
Share on other sites

I just put a set of these in my R33 and they are so good. Dont waste your time with cheap crap...it not worth it. Such a nice ride and when on softest setting, they are great for sydney roads!

So very very happy!

Where'd you by them from? got a linkskis??

:worship:

WOWOWOWOW wat a coincidence or how ever you spell it i jus bought a pair of front 1's for my r33 they seemed like a good deal so i took my chances that they would be good and thank you for confirming that. by the way what is a set worth? cheers

I just put a set of these in my R33 and they are so good. Dont waste your time with cheap crap...it not worth it. Such a nice ride and when on softest setting, they are great for sydney roads!

So very very happy!

Hi FW and all,

glad to hear you like your hks h/max's......

I have the HyperMax II's, and i'm trying to find someone who's willing to re-condition them. (I'm sure they can be??)

I have had them on for 3.5 years, on the softest setting (counterclockwise fully), and I like them, but now the rear ones just rattle over the smallest bumps!!.....still working though!!

I really don't want to replace them, as they handle well and I 'feel' safe with them...just that foooking rattle noise!!!

Anyways,

Kindest Regards,

spit.

hey guys n gals

i have these coil overs on my 33, where on the car when it was imported i love them (smooth rd driving)

but mine are alittle stiff and i did not receive the adjusting tool that goes down the hole in the top of the coilover to adjust the dampner :P

can anyone from Vic help a brother out with a lend or just adjust them for me .......... there would be a slab invovled :D

cheers

pm me or my mobs is 0412464683

hey guys n gals

i have these coil overs on my 33, where on the car when it was imported i love them (smooth rd driving)

but mine are alittle stiff and i did not receive the adjusting tool that goes down the hole in the top of the coilover to adjust the dampner :P

can anyone from Vic help a brother out with a lend or just adjust them for me .......... there would be a slab invovled :D

cheers

pm me or my mobs is 0412464683

I can help you, if you're not too far away!!

The 'tool' is no big deal, it's just a hex key for the fronts...(2.5 or 3mm...I forget), the rear may be a little more difficult, as my adjuster tools are behind the back seat, still connected to the shocks!!!..which I don't want to take out again!!

Have you got clear access to your rear shocks?...back seat will need to be removed to get to the adjustment!!

PM me?

ps...I don't drink!! LOL!

Regards,

Spit.

I just recieved my Hipermax III coilovers from Nengun for my 32 GTR (the II's have been discontinued) they are a nice looking unit, and cost just over 2G delivered.

Xspeed are fitting them on 11th June $247 +$85 for a wheel alignment, it is not worth getting your hands dirty for that sort of price!

I just recieved my Hipermax III coilovers from Nengun for my 32 GTR (the II's have been discontinued) they are a nice looking unit, and cost just over 2G delivered.

Xspeed are fitting them on 11th June $247 +$85 for a wheel alignment, it is not worth getting your hands dirty for that sort of price!

Hi PSI,

are they (HMAX III) still silver and pink in colour??

Spit.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...