Avcr Wiring Help

[Simon-S14]

Hey guys, i bought a AVCR cheap that had been in an S14 that had suffered an engine fire... theres a bit of damage to some of the loom that goes through the engine bay but i have chopped that out and soldered in new wires. now the question is with the boost solenoid there are two wires going to it. a Pink and a Black wire. which wires on the AVCR multi pin plug do the pink and black join to?

I have three wires currently not connected at the multi pin avcr plug.. they are Orange, Pink and Red... the Red wire is spliced into the main red power supply that comes from the ECU...and its an not a factory splice so im assuming that the previous owner has used this power supply to power up a gauge or something.. so yeah. anyone able to tell me which wires are suppose to hook up to which?

Cheers, Simon

[Simon-S14]

[paulr33]

the powerfc kit uses the same loom and wires

its in my sig, have a read of it regarding the boost kit

it outlines what wires are for what with a diagram and colour pin out

[Simon-S14]

thanks mate, your site is pretty useful! i had a read through there and it pretty much confirms my thoughts that pink = power and black was neg.. however it doesnt match up with the wires i have remaining... unless i put the pink from the solenoid to the pink from the avcr plug, and then the black from the solenoid and splice that into the brown that goes to the pressure sensor... would that work?

Cheers

Simon