Jump to content
SAU Community

Recommended Posts

Unclip the front cover

Picture005-1.jpg

Remove the 3 screws holding the button section to the unit and remove the button section.

Picture006.jpg

Remove the 2 screws holding the board in place. Push the back of the 4 lights either side of the gang connector to the right of the display. This will push the board out from behind and unclip it from the connector.

Picture007.jpg

Remove the globes

Picture010.jpg

Fit the LEDs, they’re very snug and may click into place, once in, rotate them to lock them into place, may be easier to push with your finger nail.

Picture011.jpg

Picture012.jpg

Push the board back onto the connector, plug the unit in to make sure all the LEDs are the correct way around an illuminate. If any don’t light up note which ones they are and replace them turning them 180 degrees. Retry and confirm you’ve got them all the right way around.

Now there are 2 options, you can either remove the light diffuser so the LEDs don’t foul on the inside of the unit (some clever angling of the LEDs will get perfect dispersion), or modify the light diffuser by drilling/melting out the section where the LEDs line up.

Picture008.jpg

Picture028.jpg

Once done, replace the screw and put back together (reverse of taking apart)

Hi Dan,

Now there are 2 options, you can either remove the light diffuser so the LEDs don’t foul on the inside of the unit (some clever angling of the LEDs will get perfect dispersion), or modify the light diffuser by drilling/melting out the section where the LEDs line up.

what does this mean? do i have to do this? and why?

Cheers

Hi Dan,

what does this mean? do i have to do this? and why?

Cheers

The lights being so bloody tiny in tungsten form only have a small area to sit, with the LED type they are slightly bigger so need some extra room made behind the diffuser...this is the only option I'm afraid.

Dan

  • 1 month later...
  • 5 weeks later...
would i loose much light if i removed the light diffuser? intead of drilling/melting it down?

what he said? can any1 confirm which method works best?

oh and pics of finished results would be awesome to :)

Ok, just did mine last night. You need patience to do this.. it kinda gay for something that should be easy.. how many people does it take to change a light globe kind of thing.

So.. I pulled out the A/C unit. Took the front cover off it and Unscrewed the circuit board. Spent a few mins figuring out how to get the circuit board out ( you do need to get it out). Take 666dans advice here and use a screw driver and push on the back of the old globes and the circuit board pushes out with them.

so.. i put em all out and put the LED ones in (either use your thumbnail or a large flat blade screwdriver to push and turn them in) Went back to the car with it in pieces still and tried it out. Shit.. i was unlucky with the 50/50 chance and got them all the wrong way. Pulled it out and turned all the LED's around the other way. Test again.. they all lit up. Hey they are really bright!

So thats kool. Now to get the cover back on. It wont fit with clear plastic diffusers in place so i took them out and tried it out in the car again. Wow that looks totally shit.. can barely see most of the lights and one is stoopidly bright. This is the point i went inside and read this tutorial properly. hmmm... seems that people had sucess with moving the LED's so they point in certain directions.. tried this and it looked better but still crap.

Well, looks like ill have to modify the diffuser. If you try and keep the diffusers in there with the LED's it will just squash them and pop them out of the socket. you DO need to make more space for them. Now i thought i would be a smarty and file the end of each LED down using sandpaper and that would give them enough room so sit in there. It would also disperse the light better. Nope.. it was a lot closer but still not enough room. Used a drill and VERY VERY carefully drilled down until i was just touching the 'V'. This will only make sense once you look at the diffuser closely. Tried it again. all good.

Final results.. it works and i can see the buttons now. Its not very bright though but thats a good thing. If i could find the stock globes i would buy them to save most of this hassle but it does look ok

the exciting part about it is that i can actually SEE the controls now. Before this i was fumbling around in the dark pressing all the buttons. Colour does match the dash cluster now :thumbsup:

looks awesome bro!

  • 1 month later...
  • 2 weeks later...
  • 3 weeks later...

i bought normal globes from genuine holden spare parts they're exactely the same except with a black base an green sleeve, i think they're in VT's but just take the globe to em an they'll know

  • 1 year later...
  • 2 months later...
  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I thought that might be the case, thats what I'll start saving for. Thanks for the info 
    • Ps i found the below forum and it seems to be the same scenario Im dealing with. Going to check my ECU coolant temp wire tomorrow    From NICOclub forum: s1 RB25det flooding at start up Thu Apr 11, 2013 7:23 am I am completely lost on this. Car ran perfectly fine when I parked it at the end of the year. I took the engine out and painted the engine bay, and put a fuel cell with an inline walbro 255 instead of the in tank unit I had last year. After reinstalling everything, the engine floods when the fuel pump primes. if i pull the fuel pump fuse it'll start, and as soon as I put the fuse back in it starts running ridiculously rich. I checked the tps voltage, and its fine. Cleaned the maf as it had some dust from sitting on a shelf all winter, fuel pressure is correct while running, but wont fire until there is less than 5psi in the lines. The fuel lines are run correctly. I have found a few threads with the same problem but no actual explanation of what fixed it, the threads just ended. Any help would be appreciated. Rb25det s1 walbro255 fuel pump nismo fpr holset hx35 turbo fmic 3" exhaust freddy intake manifold q45tb q45 maf   Re: s1 RB25det flooding at start up Fri Apr 12, 2013 5:07 am No, I didn't. I found the problem though. There was a break in one of the ecu coolant temp sensor wires. Once it was repaired it fired right up with no problems. I would have never thought a non working coolant temp sensor would have caused such an issue.
    • Hi sorry late reply I didnt get a chance to take any pics (my mechanics on the other side of the city) but the plugs were fouled from being too rich. I noticed the MAF wasn't genuine, so I replaced it with a genuine green label unit. I also swapped in a different ignitor, but the issue remains. I've narrowed it down a bit now: - If I unplug and reconnect the fuel lines and install fresh spark plugs, the car starts right up and runs perfectly. Took it around the block with no issues - As soon as I shut it off and try to restart, it won't start again - Fuel pressure while cranking is steady around 40 psi, injectors have good spray, return line is clear, and the FPR vacuum is working. It just seems like it's getting flooded after the first start I unplugged coolant sensors to see if its related to ECU flooding but that didnt make a difference. Im thinking its related to this because this issue only started happening after fixing coolant leaks and replacing the bottom part of the stock manifolds coolant pipe. My mechanic took off the inlet to get to get to do these repairs. My mechanics actually just an old mate who's retired now so ill be taking it to a different mechanic who i know has exp with RBs to see if they find anything. If you have any ideas please send em lll give it a try. Ive tried other things like swapping the injectors, fuel rail, different fuel pressure regs, different ignitor, spark plugs, comp test and MAF but the same issue persists.
    • My return flow is custom and puts the return behind the reo, instead of at the bottom. All my core is in the air flow, rather than losing some of it up behind the reo. I realise that the core really acts more as a spiky heatsink than as a constant rate heat exchanger, and that therefore size is important.... but mine fits everything I needed and wanted without having to cut anything, and that's worth something too. And there won't be a hot patch of core up behind the reo after every hit, releasing heat back into the intake air.
    • There is a really fun solution to this problem, buy a Haltech (or ECU of your choice) and put the MAF in the bin.  I'm assuming your going to want more power in future, so you'll need to get the ECU at some stage. I'd put the new MAF money towards the new ECU. 
×
×
  • Create New...