Jump to content
SAU Community

Recommended Posts

Can anyone tell me where the speedo gets it input from. I know the dash gauge itself is electronic and comes from the ECU, but which engine/gearbox sensors allows the ECU to read road speed?

My prob is that my speedo isnt working. MY AVC-R is wired into the ECU and it too isnt displaying road speed, instead reads 00.

Coinciding with my speedo quitting, is that my steering got very heavy and after about 2-3kms the HICAS light came on.

My theory is that the HICAS light is coming on as a warning that the HICAS computer isnt getting a road speed signal. (I recall reading R32s have speed sensitive steering). The heavy steering is a result of the HICAS comp having no idea of road speed and is running home to mamma.

So back to which sensors allow the ECU to read road speed. Fingers crossed its a faulty plug, wire/sensor and after a simple fix all will be right. Thing is i need to know which sensor do i look at first.

Do modern cars still have spedo cables coming from the gearbox?

Thanks for any hlp you can offer

Link to comment
https://www.sau.com.au/forums/topic/17228-ecu-speedo/
Share on other sites

  • 1 year later...

Sorry to dig up an old one (seems to be a trend lately :))

But i installed a r33 box in my r32. Now the speedo doesnt read anything, and the power fc hand controller isnt getting a speed reading as well....reads 00

My powersteering is also playing up big time as well :(

How did you end up knowing to replace the speedo cable Troy? Do i have to change the speedo cable to a 32 GTR one to get my speedo to work in the r32?

The speedo sender in the box is the r33 bottom with the gtr mechanical end on it. It and the r33 box was used in a previous r32 and both were working....

My speedo was working before the rb30det went in, with the rb20det and rb20det gearbox :)

Link to comment
https://www.sau.com.au/forums/topic/17228-ecu-speedo/#findComment-987334
Share on other sites

The r33 box i have was put into a r32 and worked previously. Speedo and all. It has the modified speedo sender already in it...ie r33 bottom half with the r32 gtr top mechanical half.

So i thought it was a simple procedure of screwing my speedo cable in to get it to work, but unfortunatly it didnt work....

Clint....did you end up using a r32 GTR speedo cable in the r32 to get it to work, or is there something im missing???

cheers.

Link to comment
https://www.sau.com.au/forums/topic/17228-ecu-speedo/#findComment-987497
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...