Jump to content
SAU Community

Recommended Posts

Sorry Neil I don't understand what you mean.. are you asking what type of r32? R32 GTST rb20det 2 door coupe '92

yeah sorry bout that, it is what i meant. it the inner glass weather strip

, sits at top of the door fab.

Could I just remind people that need numbers that it would advantageous to supply the following: (after all u are getting this for free at the expense of someones time)

FOR REQUESTS: Please specify the following, the more the better and easier for me to get the right number for you.

Model: R32 R33 R34 S15 etc

Year: MOST IMPORTANT!

Colour: Colour if body part.

Model Number: Blue plate - Really handy if you get this

Chassis Number: Blue plate - Really handy if you get this

Edited by arbess

Hey, thanks for doing this guys.

Could you help me out with a part number(s) for the rear quarter window rubber seals for a 1993 R32 gtst? So im after the rubbers that go around the rear quarter windows.

VIN 6U9000HCR32292253

Model KRCR32RGFS3 FA

Chassis HCR32-292253

Thanks,

Shaun.

can you guys help.

Need the part number for the Rear Fog Light for the GTR 34.

Its on the rear bumper, Left side (white) is the reverse light..looking for the right side (Red) fog light.

Thanks heaps

Hey, thanks for doing this guys.

Could you help me out with a part number(s) for the rear quarter window rubber seals for a 1993 R32 gtst? So im after the rubbers that go around the rear quarter windows.

VIN 6U9000HCR32292253

Model KRCR32RGFS3 FA

Chassis HCR32-292253

Thanks,

Shaun.

bad news for u the rubbers are apart of the glass, so you can't get them as a seperate part. and in advance the part No. for the qtr glasses are as follows

83306-04U00 RH qtr glass

83307-04U00 LH qtr glass

bad news for u the rubbers are apart of the glass, so you can't get them as a seperate part. and in advance the part No. for the qtr glasses are as follows

83306-04U00 RH qtr glass

83307-04U00 LH qtr glass

ahh yes its true. not cheap either....

bad news for u the rubbers are apart of the glass, so you can't get them as a seperate part. and in advance the part No. for the qtr glasses are as follows

83306-04U00 RH qtr glass

83307-04U00 LH qtr glass

Dammit!!

Thanks anyway.

Shaun.

not sure if it has been mentioned yet but the part number for a genuine turbo to dump pipe gasket on an r32 gtr (should be same for newer gtr's but unable to confirm atm) is 14445-05U00.

hope that helps somebody out :-)

not sure if it has been mentioned yet but the part number for a genuine turbo to dump pipe gasket on an r32 gtr (should be same for newer gtr's but unable to confirm atm) is 14445-05U00.

hope that helps somebody out :-)

CONFIRMED!!!!

AND I HAVE FAST AGAIN!

From all the PM recently about me getting numbers, i thought it was a good idea to reinstall after i lost my copy.

and remember!!!!! in big bold fk off letters:

FOR REQUESTS: Please specify the following, the more the better and easier for to get the right number for you.

Model: R32 R33 R34 S15 etc

Year: MOST IMPORTANT!

Colour: Colour if body part.

Model Number: Blue plate - Really handy if you get this

Chassis Number: Blue plate - Really handy if you get this

lawl.

  • 3 weeks later...
I dont think they are the same as RB26. Here is what I have for you,

RB25DET 93- 96

- Belt Fan & Alternator AY140-40850-

- Belt Compressor AY140-40910-

- Belt Power Steering and Oil Pump AY140-30845-

also

- Belt Timing 13028-20P25-

- Filter Oil AY100-NS007-

Good Luck,

Added

HI, just got these belts from Nissan Australia and the part numbers are different to the ones above

Fan & Alternator 11720-42L02AU

Compressor 11720-77A01

Power Steering 11950-58S02

I'm just guessing they are the Australian part numbers but not 100% sure.

Can you confirm if they are still correct for the following car

R33 GTSt 95 model

TYPE CHASSIS NO: ECR33-051545

MODEL NO: GGKBRTFR33VDA--JD-

Also is the Thermostat Assy the correct part number as well 21200-42L06

Thanks

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Did you pay with a credit card? I'd be putting a charge back through then finding a new sparky to sort it out. 
    • If you mean the alarm immobiliser; theyre internal to the alarm itself which makes that difficult; I couldnt even see where he put it; its not in the same place as last time; but with all black wiring it might be very challenging to trace  I had someone turn the key for me as I know it only primes for a couple of seconds As my post above; I am getting no voltage to the pump at all; but I am testing continuity of the power line (SB) from the pump plug to the relay fine. As well as the negative from the pump plug to a 12V constant.    Yeah; he blammed the no start on a bad battery; said I needed to get a new battery and it'll start. Turns out the battery drained because the tail lights had been on for half the day during the install (the rubber cushion on the brake switch gave out while he was testing it as I have a picture of the car from that morning with the tail lights off..i've replaced that). The battery was turning over the engine just fine for a long time; but got low since lights were draining it so it was too low to test a start after he finished. I bought a new one on his advice...$250 wasted. My original battery charged up just fine and is healthy.    It was running perfectly fine when I messed up the old alarm (programmed out the remotes). He couldnt start it after removing the old alarm; my assumption is that when he unhooked it; he didnt bridge the circuit back when trying to start it. Its always been perfectly fine. The ECU swap and pump were 2 years ago. It's never missed a beat in that time. 
    • This is a big issue for me without the diff. I just have zero drive from the passenger side when drivers side has no traction. Bec's parents place has a crazy steep driveway with odd camber and I have never been able to get up. My bro-in-law's 130i with an (unknown brand) LSD gets up fine as does their dad's Hiace. My car stays at the bottom. We have other odd camber roads around here as we're elevated a bit and if it's raining I can get totally stuck around some hairpins. 
    • Yeah, I am super excited for this.
    • Was the car running before he touched the car?
×
×
  • Create New...