Jump to content
SAU Community

Nsw Coilover Speculations

DECIM8
 Share

Recommended Posts

DECIM8 Grand Master

DECIM8

Posted
Posted (edited)

Hey guys,

Im currently in the process of getting coilovers and Needed to check if it was legal as It needed to comply with ADR rules for insurance purposes.

This is what ive found.

http://www.rta.nsw.gov.au/registration/dow...s/vsi/vsi06.pdf

Rta clearly states any suspension mod is fine unless it is any of the 5 listed. Which coilovers as far as I know is not.

Hope that clears it up a little for people who are searching for the same answer.

The coilovers have to meet ADR regulations or be passed in US or Europe and have to be designed for street use and not modified to suit your vehicle. That is if your suspension violates the requirements set by the RTA.

Book mark that page, Id say even print it as it may be useful if you've found yourself at a defect station.

Cheers

Nathaniel

Edited by DECIM8
Link to comment
https://www.sau.com.au/forums/topic/173299-nsw-coilover-speculations/
Share on other sites
Roy Grand Master

Roy

Posted
Posted

It always makes me laugh when i hear ppl say that they were told coil overs are illegal on Skylines. They come from the factory with coil overs. So does that mean they are illegal straight off the showroom floor. I understand generall what ppl mean is heigh adjustable coilover shocks...but it seems pretty silly to be able to ban the use of coil overs. its like saying that any car with leaf springs needs to be taken off the road. LOL although some may agree with that comment :P

siddr20 Grand Master

siddr20

Posted
Posted
It always makes me laugh when i hear ppl say that they were told coil overs are illegal on Skylines. They come from the factory with coil overs. So does that mean they are illegal straight off the showroom floor. I understand generall what ppl mean is heigh adjustable coilover shocks...but it seems pretty silly to be able to ban the use of coil overs. its like saying that any car with leaf springs needs to be taken off the road. LOL although some may agree with that comment

sorry to say, but the rules in japan and australia are totally different.

Wouldnt matter if your car is standard with coilovers or not. Has to comply against rules here.

Im not saying australian rules say no to coilovers.. But im simply stating that rules there and here are different.

Thats why we have compliance also!!

just my 2 cents..

Beer Baron Grand Master

Beer Baron

Posted
Posted
sorry to say, but the rules in japan and australia are totally different.

Wouldnt matter if your car is standard with coilovers or not. Has to comply against rules here.

Im not saying australian rules say no to coilovers.. But im simply stating that rules there and here are different.

Thats why we have compliance also!!

just my 2 cents..

????? he didn't say anything about rules in australia vs japan? so what are you talking about?

Roy Grand Master

Roy

Posted
Posted
sorry to say, but the rules in japan and australia are totally different.

Wouldnt matter if your car is standard with coilovers or not. Has to comply against rules here.

Im not saying australian rules say no to coilovers.. But im simply stating that rules there and here are different.

Thats why we have compliance also!!

just my 2 cents..

Yeh, i dont understand what you are saying?

If they want to make the use of aftermarket, height adjustable coil overs lillegal then they need to define the term better. At present saying coil overs are illegal is like saying a turbo is illegal. The definition includes std Nissan equipment, which is a turbo...so far too broad a definition, otherwise we would all be driving RB20/25/26DE cars.

Unless they want to convert all independent wishbone Skylines into macpherons sturts liek S13s/R31 etc... and this would have to be done at compliance :domokun:

DECIM8 Grand Master

DECIM8

Posted
  • Author
Posted

Or like alot of complience vehicles the parts are swaped from complied vehicles or spares moddified to pass complience and then the "illegal cars" are sold at a higher amount..

good business really.

On the subject .. are height adjustables illegal because I didnt find from whats listed that they are .. they are however if you lower it under 10cm from lowest body part?? ive now got the details in my car so i hope i dont have to pull it out .. otherwise they'll pin me for everything

predator Grand Master

predator

Posted
Posted

Practically every friggin vehicle on the road has 'coilovers'.. that is a spring over a shock absorber.. so the rule doesn't make any sense, and I doubt it's being interpreted here the correct way. I am sure the main thing they want to stop is dodgy ebay 'coilover' systems being sold here, which are pieces of crap and may be dangerous. Probably not so stupid.

The coilovers have to meet ADR regulations or be passed in US or Europe

The key part is the last two.. I'm sure most of them out there have been passed to various applicable Euro or US standards. Even if not, black paint would do wonders..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      (it is a brand new ported mellings pump) I suspect the lack of pressure is due to the leak. It was *not* that low in other logs of oil pressure in the past. It wasn't that hot either, but not far off.
    • The Bogan
      Mistakes were made, my R34 Story

      By The Bogan · Posted

      Would a Mellings oil pump be a viable option  From my time with a LS, and talking to tuners and LS specialists, the "weak" OEM oil pump is one of the first things they recommend to swap out if I was going to give the engine any high RPM I opted for a Mellings high volume, with the high pressure springs and I never had a issue with it Cost wise they are not expensive in the scheme of things 
    • davemoto63
      My new to me M35 Stagea wagon

      By davemoto63 · Posted

    • davemoto63
      My new to me M35 Stagea wagon

      By davemoto63 · Posted

      Just bought a 2002 Stagea 250tRS VR-X Four AERO VQ25DET and spent the last two weekends cleaning and detailing it.. still have to do the wheels and the engine bay but the rest of it came up nice. Imported 2011 to S.A. and I'm the third owner since it was imported. I met the guy who brought it over, he went to Japan and picked out the car, bought it and ordered the wheels. He also gave me a list of stuff he did to the car with receipts. Coil overs (I have the original springs), 3" exhaust from the dump pipe back no cat, Custom dump pipe,(I have the original exhaust), Plenum spacer, 18" custom Work XSA wheels (need restoring, I've made a start..), Shift kit put through the 5 speed tiptronic auto, TV and menus/screens changed to english, Australian DTV tuner installed in rear. I've just had four new discs and new pads as well as all the fluids including the brake fluid replaced. I have all the receipts for the last 15 years and the import papers in a nice folder. Car looks great, goes like hell but fuel economy is not a thing lol.. pics next..
    • silviaz
      Steps to DIY sanding car back ready for respray....

      By silviaz · Posted

      I ended up in this rut again lol, and used a shit ton of filler. One thing I can't understand is, even after using a big long block and going in long X pattern strokes, I always end up at bare metal again with no filler, and my repair started at one end of the door and now I've chased my tail to almost the other end of the door. I was thinking of hitting the panel with a hammer where it might be a high spot and making everything low then filling it, I did this on a small section on my other door by mistake and I think I fixed it lol. Is this a bad idea? The other thing is with guidecoat, whether it's the powder or spray, after I sand all the guide coat off, it doesn't reveal anything for me in terms of high spots and low spots and makes it especially hard when it's bare metal (at least in powdered form), am I doing something wrong here, or likely a high spot I keep going over and creating valleys? Lastly, stupid question but, is it possible that after sanding if I only sand over the filler area where I know to be a dent that it's impossible for me to dig into that dent? Unless there are other problems which I missed.  
×
×
  • Create New...