Jump to content
SAU Community

Recommended Posts

You have to run an external pick up.

I've attached a couple of pics from another setup I've seen.

I'm not sure if using a banjo is a wise idea but it did appear to work with no issues; I would prefer a speedflow type connection.

Hi Felix, here are some more pics of mine. Notice that there is a -12 fitting welded to the side of the N1 Pump and pointing in the direction of the A/C Bracket. This then goes to the fitting you see on the side of the sump. The connects up to the pick up inside. I've also put in a pic of the fitting at the back of the head that is the oil return to the sump and a pic of the internals of the sump showing the trap-door arrangement in case any of that helps..

post-20408-1183277659_thumb.jpg

post-20408-1183277672_thumb.jpg

post-20408-1183277683_thumb.jpg

post-20408-1183277696_thumb.jpg

post-20408-1183277712_thumb.jpg

post-20408-1183277724_thumb.jpg

like the others said, u need to run an external oil pickup, exactly as r32 tt has in the pics.

On a side note, did u get that adapter plate from a guy off here? If so good luck in getting it to fit, i got one and decided to throw it in the bin and make one myself :P Plus i can get them remade aswell :D

P.S sweet lookin sump matt :D i decided to go for a dry sump setup :P

Guys where did you get your adapters from? I've seen the ones Pro Engines are making and they don't look like that. There was someone else making plates and I understand they had a few issues.

Hi Mark, thats not one of mine. Mine uses either a bolt on internal pickup or a blockoff plate for the pickup hole if you're using an external pickup. The bolts fit properly, all the drilling, countersinking and tapping is done in a CNC mill, as well as the silicone groove. Pick below to show the difference.

Cheers,

Greg.

post-8303-1183436238_thumb.jpg

Hi Mark, thats not one of mine. Mine uses either a bolt on internal pickup or a blockoff plate for the pickup hole if you're using an external pickup. The bolts fit properly, all the drilling, countersinking and tapping is done in a CNC mill, as well as the silicone groove. Pick below to show the difference.

Cheers,

Greg.

I know mate, my point was that I've seen yours and they're bloody good.

yes, where did you guys get these poor fitting adapters from. I'm sure many of us could benefit from your hard bought wisdom!

Greg, that looks nice. >_<

Fitzpatrick Speedworks

I'm still waiting for my $150 refund that he promised...

There definitely appears to be some fitment issues with these adapter plates. My mechanic had the same alignment issues with many of the pre-drilled holes. Additionally there was significant grinding required of the block to leave enough room to put in some of the connecting bolts for the sump. Mine leaked like a sieve when we got it running.

On another note my oil pick was cut and refabricated to stay internal.

Andrew

Fitzpatrick Speedworks

I'm still waiting for my $150 refund that he promised...

hi guys, i have purchased the pro engine kit for mine. will be building it ip in the next few weeks will post a thread, but as for now it looks a superb bit of kit with internal pick up too. ideal for me as i like my air-con..bernie uk..

to add to my reply.

the bolt holes on the sump adapter is not stright, and doesn't light up the the holes on the sump.

gary said every RB motor is differen't but mine is clearly showing that gary's machinest just have bad eye sight and can't see stright.

if u guys remember that RB30 i had him build and we waiting a year and half for the block.

well now it has to be taken apart again and re machine it.

-piston walls are really scratched from them forcing the piston in.

-the holes fo the head bolt was drilled and tapped for bigger head studs, but he didn't drill it stright so the head and the head gasket won't go in. it's clear that 5 of them needs to be re drilled.

-improperly packing made the piston top all scratched up, from shipping.

-sump adapter needs to be re made as the plate it self isn't even flat. and the holes were off.

-block was cracked at the stock oil pick up. part of the casting.

this is a big pos

sorry i went off topic

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
    • BTW I measured the jack I have, it is 70mm at the saddle but you only have about 700 until it returns to 150mm high at the cylinder so it is good but no magic bullet.
    • My experience with Rising Sun Exports Before agreeing to the sale I tried to do as much research as I could (obviously), his Facebook reviews are 98% and he goes Live at least once or twice a week. I contacted 2 people in the UK who had used him for their imports, both had positive feedback. His explanation and talk through of the import process was thorough, answering any query no matter how stupid it was. It felt as soon as the money was sent, communication dropped off. I asked for shipping updates every 2 weeks or so, not wanting to pester him, he never had any updates. I wasn't informed the car had been dropped off at the port, I only found out by his Facebook story. I asked for the photos taken at the port, knowing he would need some for insurance purposes. I received a few 5 second clips and that's it. When asked again, he said his staff had them. Weeks later I asked again, he tells me he doesn't have any, but does have 50 photos from the original advert. I never received them. I eventually got the documents sent via WhatsApp after I mentioned the port was requesting them. I purchased a CarVX report, to find out the vehicle is a Grade R with recorded accident damage, first recorded in 2017 when it was first auctioned. He never told me the grade, then again I didn't ask. His response was "Grade R means nothing, it wasn't chassis damage". Still, I would have liked to have been informed about it. Jon prides himself on being open and honest when it comes to inspecting cars, it's his main job doing so at the auctions for customers. When the vehicle arrived in the UK I noticed a few little cosmetic issues. It's a 21 year old car so it wasn't going to be mint condition. The side skirts are cracked on each corner and the sealant is failing. The front grill on the bonnet/hood isn't secured very well, mounting studs are missing. Both minor things, but again, it would have been nice to be told. During a Facebook Live walk around video of the vehicle, he mentioned it has a front Whiteline anti roll bar/sway bar. While on the inspection ramp, I noticed the stock item has been installed. When first questioned, his response was "the ARB? Switched? Since when, it never had them". Since sending video and photo evidence I've not received a response. I'm probably being over critical of the overall condition of an old car, but all I wanted was honesty (which he claims to have). I'm aware I wasn't his only customer, he's busy doing XYZ but other reviews praise him for great communication with regular updates and photos, I felt I didn't receive the same treatment. 
    • I was able to get some underside photos while the car was on the ramp The suspension is all Altezza/IS200/IS300 so getting part's will hopefully be less of a headache
    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
×
×
  • Create New...