Jump to content
SAU Community

Recommended Posts

  • Replies 97
  • Created
  • Last Reply

Top Posters In This Topic

are they all with the red heat wrap on them? could possible get black?

dont really like things to stand out on my car, less hassle if theyre semi-hidden

They all have the orange/red one. I'm the same as you. No colour in my engine bay. I'm thinking about just taking it off as it's on the inlet side of the engine bay anyway and not really that close to the block either.

I would suppose a quick coat of some black heatproof paint might work too if you're desperate.

??

Clutch line. R & R and bleed – 1H = $98, + $5 fluid

Brake lines. R & R and bleed system – 2-2.5H = $196 - $245 + $19.95 fluid for 1ltr Dot 4, $59.95 for 1 ltr RBF600

The brake lines.

6gxtidd.jpg

WOAH!! thats alot in labour.

I'm sure there will be some DIY or members who might be able to help out.

Put me down for a set of clutch and brake lines please

It's for a Skyline R34 GTT

My clutch system has had a conversion from push to pull type.

Does this make a difference to what clutch line i get?

Clutch lines should be posted out today guys.

Those who ordered brake lines as well, they should be in and posted about the middle of next week.

Shweet.... Clutch in time for DECA ...

Brakes in time for Texicana :ermm:

Sorry I get cranky when people don't read whats been written already. The clutch lines were posted late last week. They will arrive soon. The brake lines will be posted this week sometime if things go according to plan. If people want to know how much things cost, read the 1'st post. It's not that hard is it guys?

I get cranky when people don't read whats been written already.

Settle Petal - Abo said they "should" be posted, no need to get cranky if someone confirms... we're about helping each other here :D

Now take a chill pill and be nice :bunny:

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Hi GTSBoy, Excuse my ignorance but what does a "Bad" Knee point mean ? 
    • HFM BM57 has a "bad" knee point, IIRC. It's not the same thing as the later R chassis MC.
    • The ATTESSA is functionally identical to R34; there were a bunch of JDM models that continued ATTESSA including Fuga/Q70, Skyline/Q50, Cima etc as an option. All with Auto only and I think mostly for snow regions. AFAIK there were no AWD VR30DDTT sold in Australia - it is on my to do list to check regs for racing a LHD car in Targa/ATR/AASA/CAMS events because if I can get the auto to work it would be interesting to run a 4wd car The Ecuteck TCM tuning is the same model as their ECU tuning, they already have it for R35 and Dose's favourite, BMW. You buy "points" to allow your computer to be tuned, buy either a bluetooth (phone app) or bluetooth+USB+Key (phone and PC) dongle, and pay for a tune that will be locked to your tuner ( ). You can also access the tuning software yourself but 1. it is mega expensive and 2. these computers have a billion parameters that intersect, so how could you ever spend enough time on it to get a decent result.
    • Or, is it a case of what it is like owning an R series Skyline? NFI what the previous owner has done or fiddled with... Ha ha ha After reading through this thread, I went on a bit of a research about the Q50/Q60. Now I'm quite intrigued by them! Is the AWD in them more like a WRX where it's always AWD, or is it more like the ATTESSA in the GTRs? By the sound of this TCU tuning, this sounds like a case of someone has made some real software for it, and you just need the right piece of hardware, and then you license that specific vehicle/TCU. Or is this a case of the software will be really expensive so only a few tuners have it, and you still have to pay a license per vehicle?
    • By popular demand.. it was a coil. Got my hands on 1 new OEM coil, replaced with the one that made the less noise difference when I unplugged it while the car was running and started the car up. No stutter and the engine light was gone. I guess I’ll buy the other 5 they have lol
×
×
  • Create New...