Jump to content
SAU Community

Recommended Posts

hey all,

just wondering if anyone runs a screamer pipe on a road car and if so how much cop trouble do you get with it? my car is only a weekend driver and doesnt get driven hard when there is a chance of being pulled up. thinkin bout custom making a front pipe with screamer and just wanted to see what other peoples opinions are about em on a road car!

cheers cheers!

brett

I run an external gate with screamer pipe. But cause i have the bigger turbo and the external wastegate only opening up when its near full boost its easier to control the noise. From what i have seen on the split dumps with screamers there just a noise bag most of the time esp with a standard or small turbo.

I run an external gate with screamer pipe. But cause i have the bigger turbo and the external wastegate only opening up when its near full boost its easier to control the noise. From what i have seen on the split dumps with screamers there just a noise bag most of the time esp with a standard or small turbo.

yeah im just runnin standard turbo for the moment and was just gunna make a seperator plate or sumthin. if being driven slow is there any reason a smart cop would be able to pick it? or ya reakon just ditch the idea till i get bigger turbo?

id say ditch it till bigger turbo...

standard turbo comes on boost round 2.5k - 3k so she'll be loud all the time when driving :)

fair call, makes sence! thanks 4 da advice

if they know what there are looking for screemer pipe = $9000+gst. fine. same as no cat converter. cos its a deliberate modification to miss the cat.

most of the time they dont know what it is. they look at it and say "ahhhh blow of valve pipe" lol.

i used to have one. it was cool but got anoying after a while. and i rekon if your car doesnt do tens its not worthy :)

hey this is a good chance to pitch my idea.

not sure if you guys have seen those new mufflers that have a butterfly valve in them so you can control the flow of exhaust and thus the noise level?

well i was thinking why not modify a split dump, so just past the join have either a swing valve, or a butterfly valve that you can control from the car using the same remote that comes with the controllable muffler?

the valve just needs to open and close the screamer or be able to redirect the air flow. that way you have a choice if you want screamer or star fish. i don't know maybe its been done before? The only problem I can think of is a cheap mech to operate the valve that can stand the high temps of that part of the process.

If this doesn't make sense say so and I will draw up a diagram of what I mean, be warned tho I’m no engineering student

yeah im just runnin standard turbo for the moment and was just gunna make a seperator plate or sumthin. if being driven slow is there any reason a smart cop would be able to pick it? or ya reakon just ditch the idea till i get bigger turbo?

Stock turbo = screamer pointless.

It sounds dreadful to begin with, and then you need the dump pipe well made otherwise it leaks trying to vent the internal gate to ATMO which makes it sound even worse.

Your better off with a decent flowing split dump on a stock, or near stock turbo.

That said, I used to run 45mm ext gate/screamer setup on the street back in 2004/05

I wouldnt dream of it in Melb in 2007. Its a massive defect & EPA waiting to happen.

Most people i know have plumbed in ext gates that once were atmo :)

I was defected back in 2005 for the ext gate/screamer, and the law/EPA have only become tougher and tougher since then.

Its really not worth the hassle.

mate has one on his R34 GT-t, i find the sound kinda of appealing and it isnt open that often (if driven right) has been pulled over heaps but never got done for it (combination of luck and stupidity on the cop's part). thing that i dont like about it is the fluttering from the boost controller opening and closing it rapidly. sounds like Hanibal Lectre when hes talkin bout eatin the kidney and fava beans. fs fsfshsfhs fshf shf fhsfs

Just get a straight thru pipe from the cat all the way..

I had it on mine for a day at track day and its freaking loud.. so loud that even with a helmet on and windows up, my ears nearly went deaf!!

heheh

mate has one on his R34 GT-t, i find the sound kinda of appealing and it isnt open that often (if driven right) has been pulled over heaps but never got done for it (combination of luck and stupidity on the cop's part). thing that i dont like about it is the fluttering from the boost controller opening and closing it rapidly. sounds like Hanibal Lectre when hes talkin bout eatin the kidney and fava beans. fs fsfshsfhs fshf shf fhsfs

hahahaha yeeah nice example! thinkin its prob not worth it, have heard if you get a cluey cop they will take photos under toys car and hand it onto epa.

as for the open/closable pipe i have heard of it being done using a gate and allen key open close system, buggered if i know how it works tho!

thanks for the info guys, appriciate it

brett

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Wheel alignment immediately. Not "when I get around to it". And further to what Duncan said - you cannot just put camber arms on and shorten them. You will introduce bump steer far in excess of what the car had with stock arms. You need adjustable tension arms and they need to be shortened also. The simplest approach is to shorten them the same % as the stock ones. This will not be correct or optimal, but it will be better than any other guess. The correct way to set the lengths of both arms is to use a properly built/set up bump steer gauge and trial and error the adjustments until you hit the camber you need and want and have minimum bump steer in the range of motion that the wheel is expected to travel. And what Duncan said about toe is also very true. And you cannot change the camber arm without also affecting toe. So when you have adjustable arms on the back of a Skyline, the car either needs to go to a talented wheel aligner (not your local tyre shop dropout), or you need to be able to do this stuff yourself at home. Guess which approach I have taken? I have built my own gear for camber, toe and bump steer measurement and I do all this on the flattest bit of concrete I have, with some shims under the tyres on one side to level the car.
    • Thought I would get some advice from others on this situation.    Relevant info: R33 GTS25t Link G4x ECU Walbro 255LPH w/ OEM FP Relay (No relay mod) Scenario: I accidentally messed up my old AVS S5 (rev.1) at the start of the year and the cars been immobilised. Also the siren BBU has completely failed; so I decided to upgrade it.  I got a newer AVS S5 (rev.2?) installed on Friday. The guy removed the old one and its immobilisers. Tried to start it; the car cranks but doesnt start.  The new one was installed and all the alarm functions seem to be working as they should; still wouldn't start Went to bed; got up on Friday morning and decided to have a look into the no start problem. Found the car completely dead.  Charged the battery; plugged it back in and found the brake lights were stuck on.  Unplugging the brake pedal switch the lights turn off. Plug it back in and theyre stuck on again. I tested the switch (continuity test and resistance); all looks good (0-1kohm).  On talking to AVS; found its because of the rubber stopper on the brake pedal; sure enough the middle of it is missing so have ordered a new one. One of those wear items; which was confusing what was going on However when I try unplugging the STOP Light fuses (under the dash and under the hood) the brake light still stays on. Should those fuses not cut the brake light circuit?  I then checked the ECU; FP Speed Error.  Testing the pump again; I can hear the relay clicking every time I switch it to ON. I unplugged the pump and put the multimeter across the plug. No continuity; im seeing 0.6V (ECU signal?) and when it switches the relay I think its like 20mA or 200mA). Not seeing 12.4V / 7-9A. As far as I know; the Fuel Pump was wired through one of the immobiliser relays on the old alarm.  He pulled some thick gauged harness out with the old alarm wiring; which looks to me like it was to bridge connections into the immobilisers? Before it got immobilised it was running just fine.  Im at a loss to why the FP is getting no voltage; I thought maybe the FP was faulty (even though I havent even done 50km on the new pump) but no voltage at the harness plug.  Questions: Could it be he didnt reconnect the fuel pump when testing it after the old alarm removal (before installing the new alarm)?  Is this a case of bridging to the brake lights instead of the fuel pump circuit? It's a bit beyond me as I dont do a lot with electrical; so have tried my best to diagnose what I think seems to make sense.  Seeking advice if theres for sure an issue with the alarm install to get him back here; or if I do infact, need an auto electrician to diagnose it. 
    • Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
    • I know I have to get a wheel alignment but until then I just need to bring the rear tyres in a bit they're wearing to the belt on the inside and brand new on the outside edge. I did shorten the arms a bit but got it wrong now after a few klms the Slip and VDC lights come on. I'd just like to get it to a point where I can drive for another week or two before getting an alignment. I've had to pay a lot of other stuff recently so doing it myself is my only option 
    • You just need a wheel alignment after, so just set them to the same as current and drive to the shop. As there are 2 upper links it may also be worth adding adjustable upper front links at the same time; these reduce bump steer when you move the camber (note that setting those correctly takes a lot longer as you have to recheck the camber at each length of the toe arm, through a range of movement, so you could just ignore that unless the handling becomes unpredictable)
×
×
  • Create New...