Jump to content
SAU Community

Recommended Posts

Hey gys, i just put in some new splitfire coils.....and the car is still missing really bad, mainly in second gear and when i give it WOT, foot down.....i had them gapped at .8mm, and the car is only running .7bar boost....thats like 10psi isnt it?

Ive got the following mods

3" exhast to split dump

hybrid fmic

apexi pod

splitfire coils with ngk bcpr6es (gapped at .8mm)

What else could i try to do?

i havent reset my factory ecu for awhile, dnt knw if that will help.....

Im really annoyed that my coils werent the ones at fault($550 later)

had same issues, if it's your stock computer it actually dumps so much timming in it couses it to missfire. I got a retuned ecy removing teh R&R and problem solved. DO a search for WogsRus and Splitfires shoudl come up.

hey mate, sounds like the same problem i had a few months back..car was missing real bad, i took it down to r.e. customs and they fixed it straight away. the problem was two things, dodgy ignitor and fuel pump.

hope that helps!

Good Luck mate

AFM - Spray it with contact cleaner. Easy as.

As for spending $550 on splitfires, didnt you test your original coil packs first?

Before going out and spending money?

Could be anything thats causing a missfire.

Plugs

Coils

Ignitor

ECU

AFM

Connectors corroded to each sensor

CAS

There is a long list of things to have checked that will tell you whats causing the problem

had same issues, if it's your stock computer it actually dumps so much timming in it couses it to missfire.

Its called Rich and Retard for a reason

The ecu pulls so much timing out to prevent detonation, not increase it lol :domokun:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I can see between the water jacket and cyl 3 there wasn't a hard line of combustion gas. It certainly appears that the issue is coming from there. Yes, checked the tension. All at 100ft lbs where I set them 5 years ago. These blocks can crack but generally when they have been over bored. Mine is only 0.5mm oversize at 89.5mm. They break between cylinders around the 91mm mark. No sign of that with mine. My gut feeling is the head gasket lifted a while back when the studs stretched and i bandaided it by retorquing the studs. It's finally let go.
    • My Nismo 1.5 churps a bit on reverse turns when cold, but besides that feels like a stock diff.
    • Yes, but, I paid cash and I'm pretty sure the receipt was in the bin 10 minutes after I got home Note to self, keep all receipts
    • Bunnings would have just handed you your money back on that one!
    • So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
×
×
  • Create New...