Jump to content
SAU Community

Recommended Posts

ok, looks like the following people are meeting at

The Warehouse in Stud Park Shopping Centre which is on Stud Road at 6.30am for a 7.00am sharp departure.

We will then travel (not via city link) as a group to the main official pre-meet at the Kmart in Campbellfield with enough time to have a bit of breakfast & chat with the rest of the guys:

ashneel

rh1n0

htial

jippa3000

black_gtst

leighzor

philmak

ardie

Ricey

femno

cjpwrx

180sx_luva(maybe)

dilmah (me)

I'll PM everyone in the above list to confirm in the next couple of days with my phone number, etc.. Awesome turn up guys!!

Original post by ashneel here (link)

Last edited 7/9/07 08:15am

  • Replies 453
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

ok cool

have already asked some mates so "if nothing comes up" i shall be attending with the following

1x merc

2x bmw

1x statesman

1x vt ss

3x wrx

1x s2000

1x s14

maybe put us down as "unsure" though since there's still long 6 days to sunday

thanks

3 wrx fags + s2000 are out

statesman, merc + 1 bmw confirmed!

we'll probs show up at kmart campbellfield

thanks

ok, looks like the following people are meeting at the Warehouse in Stud Park Shopping Centre which is on Stud Road at 7am sharp.

ashneel

rh1n0

htial

jippa3000

black_gtst

leighzor

philmak

180sx_luva(maybe)

dilmah (me)

I'll PM everyone in the above list to confirm in the next couple of days. Awesome turn up guys!!

Original post by ashneel here (link)

correction friend with the T bag

meet is from 6:30 we leave 7am sharp to make it to the main pre meet by 8ish

correction friend with the T bag

meet is from 6:30 we leave 7am sharp to make it to the main pre meet by 8ish

how come so early? :yes:

is the 'main pre meet (k mart)' like on the way to the main meet point (shell servo or what ever) from stud park or are we going out of our way to meet with them. Only reason why i ask is cos of petrol $ :)

any other crew from Geelong going on this? I think I saw Phil post in here somewhere? Just meeting in the usuall location to meet up with the big cruise as they pass through on surfcoast hwy?

My Sunday right now is looking very free so I'll be there!

Abcent, where in Grovy are you going to wait ?

that SS would rip the doors off most japs cars on the road

but its not a race :) and since i'll be passenger + long drive i'd rather luxury over speed :P

We're talking about the GOR with corners, not the Princess hwy............. no chance :yes:

Hey another person from Geelong here just wondering where on the Surfcoast Hwy we meetin up???

brad

check the first post. i updated it with the location for where those meeting uson the surf coast hwy are to be. its just as you turn onto it from la trobe st. check it out.

main pre meet is at the Kmart in Campbelffield. your not going out of your way as such from stud park just a slight detour around the north area so not to use citylink and toll ways. this way you'll get the pre meet and we can all leave together.

any other crew from Geelong going on this? I think I saw Phil post in here somewhere? Just meeting in the usuall location to meet up with the big cruise as they pass through on surfcoast hwy?

My Sunday right now is looking very free so I'll be there!

Hey Berin, i'll be waiting at the same place as we did for the official cruise on the surf coast hwy.

Everyone from Geelong to make things easier as there has been a few different points where we've joined these cruises in the past....

Meet at the BP service station on Torquay Rd at 10:30am , I'll have my CB on me an will be in contact with Daniel to find out updates etc....

Daniel, this meet point is only just a little further up the road from where you've made it in you fisrt post, i think it'll just be easier. Let me know if you'd rather not change it though.

Oh an if your planning to go the back way through the hills an back to geelong, I can lead you through the back of geelong (also avoiding winchelsea) aswell so you dont get stuck on the HWY in the centre were it gets very congested?

berin that seems fine to me, im assuming its the same side as we are heading so shouldnt be a problem. ill update the first post and yes i will definitly be in contact with you over the cb. at the same time are you able to pm your number and ill text you when we passing through geelong. will give u a better idea as my handheld cb will still be out of range.

Everyone from Geelong[/size], to make things easier as there has been a few different points where we've joined these cruises in the past....

Meet at the BP service station on Torquay Rd, I'll have my CB on me an will be in contact with Daniel to find out updates etc....

Daniel, this meet point is only just a little further up the road from where you've made it in you fisrt post, i think it'll just be easier. Let me know if you'd rather not change it though.

Oh an if your planning to go the back way through the hills an back to geelong, I can lead you through the back of geelong (also avoiding winchelsea) aswell so you dont get stuck on the HWY in the centre were it gets very congested?

See you there.........

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • You very likely need to get it on a dyno and tune it. My assumption is, you've got an RB25DET tune in it, which has a different manifold, different injectors, and different cams as a minimum. What O2 sensor are you running?   When you say it runs extremely rich from idle all the way to redline, is this just free revving it you see that?
    • I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
    • I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
    • Thanks for the replies everyone. Definitely a coolant push. Oil catch can is empty and always has been. As the engine is out now I'll be having a good look over things. I do have some detonation on the piston tops from a trigger issue back about 5 years ago. I felt it and shut off then bought a new ecu and changed the trigger. Never been an issue since. It never hurt the power, its made almost 80hp more since that incident but I will pull the bearing caps to take a look. If the bearings are damaged I will do a bottom end refresh. Head is being re conditioned at the moment and the block will be cleaned and checked to ensure it's flat. I'll go with a kameari gasket and see how it ends up. The other thing I'm not super keen on is the cylinder colours. I suspect this is from the inlet manifold. The plan will be to put it back together, retune and then stick a plazmaman billet inlet on it and retune. I'm happy with the power, if it makes a little more, then great, but I would rather just make everything more efficient at this stage.
    • Maybe they'll look to do a bunch of presales to help inject some cash fast for their financial issues...
×
×
  • Create New...