Jump to content
SAU Community

Blow Turbo?

nissan200sx.dk
 Share

Recommended Posts

nissan200sx.dk Community Regular

nissan200sx.dk

Posted
Posted

Hi.

Have a RB25DET smoking blue.. I know pistons / bore is worn. It began to smoke blue after I had a broken bolt for cam pully belt, result was 24 bend valves.. After I got valves fixed it smoked. Did not smoke before bend valves. A valve guide had broken. Got the head completely rebuilt. Helped alot on the smoke issue.. But was still smoking.

Today It was more bad than normally.. Just to check I checked axle movement on my turbo. (A Garrett GT3076r, has run 30.000km.)

When engine is just turrned of, no oil pressure of course, but stil hot and with "some" oil in the turbo, how much up and down, back and forth movement must there be on the axle..?

Link to comment
https://www.sau.com.au/forums/topic/175253-blow-turbo/
Share on other sites
R31Nismoid Grand Master

R31Nismoid

Posted
Posted

Side to side is ok, your going to get that.

Its less prominent with ball bearing, but that is a little.

My bush had a lot more side-to-side compared to the ball bearing i had.

in-and-out movement is bad. I've never had any on either turbo

Link to comment
https://www.sau.com.au/forums/topic/175253-blow-turbo/#findComment-3211903
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      Cas issue

      By GTSBoy · Posted

      The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Duncan
      RB26DETT Sketchy boost mod?

      By Duncan · Posted

      Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • nash47
      Cas issue

      By nash47 · Posted

      Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
    • nxh
      R34 4 door side skirt identification

      By nxh · Posted

      Legend. I ended up finding the facebook account of the owner of the first car i sent but sadly he deactivated the account. I think you’re right in saying it’s some sort of well done custom job. Really appreciate your help anyways.
    • GTSBoy
      boost source Size Garrett gt28 gen2

      By GTSBoy · Posted

      Totally equivalent. Stock often goes from the comp cover because that's where the actuator is also installed and the factory needs 2" of hose to make the connection - and it comes as a pre-assembled unit. They totally have a boost reference from somewhere between the turbo and the throttle(s). Oh, jeez. Just do it in M12 then. We don't actually care that much. I would expect any such AN converter fitting to rely on an o-ring or some other seal onto a flat surface under the flange of the hex**, because bolt threads are no intended to provide a pressure seal. unlike..... pipe threads. **which also requires a suitably flat and smooth surface on the turbo's boss to provide the seal.
×
×
  • Create New...