Jump to content
SAU Community

Recommended Posts

Item: Genuine Modena 3pce Lightweight Jap Wheels with Tires

PCD: 5x114.3

F: 17x8.5 +45 with 225/45

R: 17x9.5 +38 with 245/40

i can throw in some 8mm spacers for free and some brand new spacers for the front, either 25 or 30mm for an extra $100.

see this thread for tyres which can come with the wheels: http://www.skylinesaustralia.com/forums/Sa...le-t181837.html

Location: SA, can post anywhere

Item Condition: Good, fair bit of gutter rash but seem to be straight, slight leak in one of the rears, expected to be the valve stem, should be peanuts to fix if u wanted to.

Reason for Selling: looking to change

Price and Payment Conditions: For the wheels by themselves $600, if you get the tyres and spacers i can make them $500 + tyres and spacers, throw me a PM and we can work out a deal.

Extra Info: These were brought in from Japan on a r34, they weigh less than my URAS NS-01's and are wider which suprised me alot. Will consider a swap for some other rims similar to these, not sure what im after yet, just feel like a change.

Pictures:

wheel2bc1.jpg

rims1tm9.jpg

rims2ir0.jpg

Link to comment
https://www.sau.com.au/forums/topic/175597-17-lightweight-jap-rims-with-dish/
Share on other sites

price change, i forgot to change the price from the copy and paste job i did from another item for sale (for the template), sorry about any misunderstandings, i farked up :thumbsup:

  • 1 month later...

sales fell through, well i think they did, price drop to $800 firm as thats what i had agreed to sell them for to someone, if i dont get rid of them soon im powdercoating the centres black and keeping them :)

will also supply some spacers for the front for an extra $100, brand new, 25mm, 30mm etc

think they might b old school RAYS rims...a friend of mine with a tire shop showed me the other day:D great looking rims but will need spacers to clear brakes in most skylines i rekon

think they might b old school RAYS rims...a friend of mine with a tire shop showed me the other day:D great looking rims but will need spacers to clear brakes in most skylines i rekon

yep very tough looking rim, personally i rekon they would look best on a r31 or dr30 etc, suit the old school lines. should fit over smaller brakes, they fit over my rear brakes but my 4 pot m-spec brakes at the front they needed some small spacers to clear them, i was running them with 25mm spacers and sat very tough but i guess u could run them with smaller spacers if u wanted to. as i said for an extra $100 i can supply spacers.

i like, im gonna look into how much it would cost to get them redrilled to 4 stud and get back to you.

alright no probs.

BTW these come with some centre cap things that go onto the thing in the middle, love the terminology haha.

just called up wheel worx, $50 a wheel to redrill them to 4x114.3

if anyone is interested i could get this done before the sale at the buyers expense obviously.

  • 2 weeks later...
  • 3 weeks later...

still for sale peps, throw me an offer and i might consider it, starting to get too many rims and dont really have a use for these anymore. at the same time i dont really want to sell these for cheap as they are proper genuine Jap wheels, not some cheap heavy shit that make the car handle like a shit down a slippery dip.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The car/ECU will have all the sensor that it needs and expect to have. I think i do not have to explain to you how the Link is way better specialy if you have swapped engine   I just do not want to deal with any "problems" cuz i have only Nistune which i learned is not that great and in my case cant even deal with that speed problem (Link can) And of course it will be way more easier to tune and diagnose and safe. And for the ECU/speed problem...i dont know.
    • Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
    • Very good news...I contacted Racebox about it last night. My car is a 2016 so remains to be seen if it is compatible, requires a TCU swap, or is impossible.
×
×
  • Create New...