Jump to content
SAU Community

Recommended Posts

Hi all

im just after some Info on these cars, i am currently thinking about getting another car because i have to offload my R31.

Would this be a good car to drive on ur P's??

And what features can i expect , like HICAS , ABS ??

Cheers

Chris :burnout:

Link to comment
https://www.sau.com.au/forums/topic/17568-r32-gts-t-type-m/
Share on other sites

Lucky bastard - wish i couldve had one when i was on my P's

Yeah dude, fantastic car. Nothing too flash just a great RWD, turbo Coupe with plenty of tuning ability and a fair bit of street cred.

Get one with a sunroof - honestly the best feature of my car

They come fully loaded with power windows/mirrors, rear wiper, climate control air-con. The majority come with aftermarket filter, possibly Momo steering wheel and knob like mine did and often a big bore exhaust. Try and get one with full bodykit aswell.

Brakes are good but no ABS. HICAS is std issue but is not a reason to buy the car - if anything it makes the car worse.

Expect moderate-heavy fuel consumption i find 350km to a tank max.

Resale value seems a tad stronger than equivalent R33 but both are good.

Hope this helps!! Goodluck!!

Link to comment
https://www.sau.com.au/forums/topic/17568-r32-gts-t-type-m/#findComment-364513
Share on other sites

Here's my Previous cars that I have owned:

TE 250ci 4 Speed Cortina - Great Car Tough fairly quick excellent burnouts but I repaired the Manual Gearbox 6 times. Selector Forks kept snapping and once I had the bearings go.

Owned 2 years. Fuel Consumption 350kays to 50 litres.

VL 3ltr NA 5 Speed Commodore - Gearbox's syncro's were chewed. Slapped a bit of Nulon G70 to smooth things out and sold it. Excellent car not 1 breakage in 9 months of ownership.

Owned 9 months - Fuel consumption 400kays to 50 litres.

VS V8 5ltr 5 Speed IRS SRS ABS, 3.5" exhaust adj. bilstein shocks lowered superlow HD sway bars. Piece of crap car. Rattled and only had 60,000kays on the clock. Broke the rear crossmembed where the diff bolts on. A Clean crack all around the chassis from one of the diff bolts causing the arse end to sit on the groud with around 45degree's negative camber = Tow home. Next was the diff.. Started grinding and felt like a locker. (not one burnout on it either only take off wheel spin) next was the gearbox.. started poping out of gears and bearings were extremly rattly = gearbox rebuild.. I then sold the car.

Owned 9 months - Fuel consumption 430kays to 60-65 litres.

R32 GTS-T Owned close to 2 years now and not one single problem that cost me $$. General maintence shiet like cam belt waterpump at 100,00kays radiator clean etc.. Apart from that the car is extremly tough.. Since I have owned the car It has just kept going and going. I've been running 15-16psi in it for the last year to year and a half. Lots of flat changes in to second that send you wheel spinning all the way through second with 225 50' 16" tyres. A few burnouts.. First quickly click second as you take your foot off the brake and fill the street with smoke.. :)

Owned ~2 years - Fuel consumption 470kays then it hits the red light for approx 50 litres. - City driving no open road driving.

I do seem to get better fuel consumption that others. Not sure why I drive it damn hard and on 15psi. It does have a sort of clear looking top injector with a red dot on it ?!?!?

The R32 GTS-T Is supposed to get 10.5Litres per 100kays which is about what I am getting. If you are in the 300-350kays then some thing is slightly wrong or not quite right. Check your o2 Sensor.. A new one is around 280 bucks. Ouch.

Very tough car though.. Almost unbreakable I am extremly happy with it.

When buying one pull the rear quarter covers on in the boot and stick your hand inside the rear quarter.. If you find dirt water etc.. You know it has most probably had a prang and or the boot or rear window is some how leaking.

Check underneath the car and look at the chassis. make sure it isn't flattened out or gone skidding over rocks due to drifts.

When you open the door check where to sil panel joins with the rear quarter and make sure there is no rust developing. If there is the chances are it has had an arse ender and had a bad repair.

Check the usual door gaps boot gaps light gaps and bumper gaps are all even

Also check the car in all angles with the sun on it, do a u turn and check the other side. It will show up any bodgy paint fix ups..

Better not to have any suprises otherwise you will get it home wash it and spot it.. Then you will be unhappy.. and your throat will sink. :) That happened to the rear quarter in my VS.. Some one repainted it and used to much metalic.. :( Looks bad in the light well I could see it. All the gaps were fine however.

Link to comment
https://www.sau.com.au/forums/topic/17568-r32-gts-t-type-m/#findComment-364589
Share on other sites

my gts-t has ABS

ive found the chassis, and drivetrain to be great. lovely car to drive. my experience with the RB20 has been one of a rollercoaster ride, however ive heard the majority of them are bulletproof.

i get around 400k's to a tank, all in all a great little car however can't carry people in the back and all the 32's ive been in have had their own 'quirks' as theyre becoming a fairly old car now

Link to comment
https://www.sau.com.au/forums/topic/17568-r32-gts-t-type-m/#findComment-364632
Share on other sites

there have been a few, but yeh running lean was one of them :P

dont let my experiences put you off though, it seems to be a freak case!

they also come with HICAS, but youre probably best off removing it as it isnt the best system. the brakes that come standard from nissan are also very good, as an all-round car it is very good

Link to comment
https://www.sau.com.au/forums/topic/17568-r32-gts-t-type-m/#findComment-364689
Share on other sites

Great car! Most of the points have been covered, but theres a couple id like to add:

Sunroof's - Make sure its a factory one and make sure theres no rust bubbling up around it, or you'll be forever repainting the roof.

Gearboxes - the RB20 has a rep for having a weakish gearbox. Unfortunately id have to agree, mine clunks, whines, whirrs and squeals its way through all 5 gears... but its still going and it never pops out of gear so i guess it cant be THAT bad! :)

Climate control - These also have a rep for having dodgy LCD screens, everything works when you press the buttons but the screen just shows gibberish. I know a guy who went through 5 climate control units in his GTR trying to find one with a working screen.

Ive had no problems with mine apart from those which have been my own stupid fault (eg: running too much boost and burning 2 valves).

Red17

Link to comment
https://www.sau.com.au/forums/topic/17568-r32-gts-t-type-m/#findComment-367976
Share on other sites

Compared to my old VS V8 Manual commodore that also had IRS the Skyline feels easier to handle in the wet.

The commodore even in the dry use to flick out really quick and was hard to hold in a smooth slide where as the skyline seems to go out a little slower and loves to be held in a slide. Especially in the dry when stepping on the brake through first jump off the brake and slap second pulling out of a corner. :)

They still can snap out very quickly given the right conditions.

Link to comment
https://www.sau.com.au/forums/topic/17568-r32-gts-t-type-m/#findComment-368119
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Who did you have do the installation? I actually know someone who is VERY familiar with the AVS gear. The main point of contact though would be your installer.   Where are you based in NZ?
    • Look, realistically, those are some fairly chunky connectors and wires so it is a reasonably fair bet that that loom was involved in the redirection of the fuel pump and/or ECU/ignition power for the immobiliser. It's also fair to be that the new immobiliser is essentially the same thing as the old one, and so it probably needs the same stuff done to make it do what it has to do. Given that you are talking about a car that no-one else here is familiar with (I mean your exact car) and an alarm that I've never heard of before and so probably not many others are familiar with, and that some wire monkey has been messing with it out of our sight, it seems reasonable that the wire monkey should be fixing this.
    • Wheel alignment immediately. Not "when I get around to it". And further to what Duncan said - you cannot just put camber arms on and shorten them. You will introduce bump steer far in excess of what the car had with stock arms. You need adjustable tension arms and they need to be shortened also. The simplest approach is to shorten them the same % as the stock ones. This will not be correct or optimal, but it will be better than any other guess. The correct way to set the lengths of both arms is to use a properly built/set up bump steer gauge and trial and error the adjustments until you hit the camber you need and want and have minimum bump steer in the range of motion that the wheel is expected to travel. And what Duncan said about toe is also very true. And you cannot change the camber arm without also affecting toe. So when you have adjustable arms on the back of a Skyline, the car either needs to go to a talented wheel aligner (not your local tyre shop dropout), or you need to be able to do this stuff yourself at home. Guess which approach I have taken? I have built my own gear for camber, toe and bump steer measurement and I do all this on the flattest bit of concrete I have, with some shims under the tyres on one side to level the car.
    • Thought I would get some advice from others on this situation.    Relevant info: R33 GTS25t Link G4x ECU Walbro 255LPH w/ OEM FP Relay (No relay mod) Scenario: I accidentally messed up my old AVS S5 (rev.1) at the start of the year and the cars been immobilised. Also the siren BBU has completely failed; so I decided to upgrade it.  I got a newer AVS S5 (rev.2?) installed on Friday. The guy removed the old one and its immobilisers. Tried to start it; the car cranks but doesnt start.  The new one was installed and all the alarm functions seem to be working as they should; still wouldn't start Went to bed; got up on Friday morning and decided to have a look into the no start problem. Found the car completely dead.  Charged the battery; plugged it back in and found the brake lights were stuck on.  Unplugging the brake pedal switch the lights turn off. Plug it back in and theyre stuck on again. I tested the switch (continuity test and resistance); all looks good (0-1kohm).  On talking to AVS; found its because of the rubber stopper on the brake pedal; sure enough the middle of it is missing so have ordered a new one. One of those wear items; which was confusing what was going on However when I try unplugging the STOP Light fuses (under the dash and under the hood) the brake light still stays on. Should those fuses not cut the brake light circuit?  I then checked the ECU; FP Speed Error.  Testing the pump again; I can hear the relay clicking every time I switch it to ON. I unplugged the pump and put the multimeter across the plug. No continuity; im seeing 0.6V (ECU signal?) and when it switches the relay I think its like 20mA or 200mA). Not seeing 12.4V / 7-9A. As far as I know; the Fuel Pump was wired through one of the immobiliser relays on the old alarm.  He pulled some thick gauged harness out with the old alarm wiring; which looks to me like it was to bridge connections into the immobilisers? Before it got immobilised it was running just fine.  Im at a loss to why the FP is getting no voltage; I thought maybe the FP was faulty (even though I havent even done 50km on the new pump) but no voltage at the harness plug.  Questions: Could it be he didnt reconnect the fuel pump when testing it after the old alarm removal (before installing the new alarm)?  Is this a case of bridging to the brake lights instead of the fuel pump circuit? It's a bit beyond me as I dont do a lot with electrical; so have tried my best to diagnose what I think seems to make sense.  Seeking advice if theres for sure an issue with the alarm install to get him back here; or if I do infact, need an auto electrician to diagnose it. 
    • Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
×
×
  • Create New...