Jump to content
SAU Community

Recommended Posts

There's so many ways to make money, so I say just get the car now. The house can come later (probably bad financial advice, but a nice car is worth it).

Anyway, my alternate suggestion is that you wait a bit and get a Toyota Chaser.

And Strich9ine - I too had a fair amount of money saved by the time I was 19 and also only spent bugger all each week. I know you might find it a bit hard to believe, but Ease up on him a bit. It's quite possible.

  • 2 weeks later...

that was my concern. Getting into financial trouble before i've even left uni and got a proper full time job.

If i get a fixed interest rate, doesn't the RBA decisions on rates become mute for me? :confused:

that's another thing, will i be able to actually find ppl to rent? Only like a $400K place, about 400pw, i'd have a 200K loan. Repayments are around $1100 a month. After spliting rent money with dad, that's like $800 a month going straight to the loan. Prob a little more cos a month isn't exaclty 4 weeks. So i'd have $300 to settle every month. with about $1500 net every month i'm earning that leaves $1200 a month just for me, which is more than enough. So would prob thro whatever i've got at the loan after what's left.

If i don't have tennants? Well servicing the loan wouldn't leave me with much, bout $100 a week. But for someone in my position, i don't spend $100 a week. But still, i wouldn't wanna be just putting everything i earn into loan repayments.

All these larger financial concerns are making think more about a R34 GT-T, and just that. One came thru on Geoff's list $28700 + ORC's!!!! That's like $30k on the road!! And auction grade 4.5!! Was soooo tempted just to go "Geoff, can i have it pls!" Too bad it was the pewter colour :)

but yeah, very valid points Franks, thanks.

cheers.

Guest wilco

If no one mentioned it yet (this thread is too long for me to read) you need to realise you cannot claim the interest on your loan when it has been used for personal assets. You would need to take the amount used to buy the unit, and claim that as a percentage of the total loan, and the % used to buy the car is just costing you money.

You would be wise to put your money into investments, people who put money into invrstments at your age have a LOT more money a few years down the track, especially if you have the opportunity to buy something decent like that from the beginning. Of course when you sell it you'll poay CGT as well, but driving the Skyline you'll pay performance car tax anyways (speeding fines etc).

hey wilco,

ah... don't quite understand ur post there. So i can't just add say $35k to the loan for the car? Some catch there for that?

CGT? hahaha, performance car tax. Wouldn't be surprised if bracksie just made that one up anyway! stupid prick ;)

oh by the way, i didn't say earlier but thanks to Shell before for her post!! Cheers dude :D

I havent read most of this thread, because its long :)

but ...

if you have 400k then why don't you buy two apartments?

or units/townhouses/whatever

in Perth at the moment, 200k will get you an alright-ish unit. Not sure about other cities. But then if you have cheaper units or townhouses, and try and get them in trendy-ish areas, you can aim them at the young executive market.

I rented one such unit last year ... I think they sold it when I moved out for around 240k. The owners had only bought it about a year and a half/two years earlier for 200k.

I'd do that I reckon.

Then after a year you could refinance your mortgage, and get your R34 :D

Guest wilco

SS8 you should really talk to an accountant at the very least, or there may be a tax accountant on here? I have the luxury of a former boss being a very good tax accountant so my advice is free :P

There sure are ways around CGT, depends how long you keep the place for and so on, once again before you go a lawyer, I'd be seeing an accountant at least.

You also have deducations such as the depreciation on the asset and plant (curtains, carpet, water heater, light fittings, air con etc etc) so you'll need to know a few things before you jump in, as don't forget strata rates, council rates, water rates, emergeny services levy, management fees, on top of your interest, but then you have a stack of deductions.

Property is a good thing, but then there are also people saying that it is a bubble waiting to burst. If you are in it for the long term, it will always come good eventually.

The best thing with investments it to KNOW about what you are investing in, or if you are just the guy with the money, then make sure the guy who is doing the leg work for you (your dad?) knows about investing in what you choose, be it property or otherwise.

In the three years I have been investing I could have bought a new R34 GTR on the profit (but profit makes more profit, and at some point I'll call it a day and buy something for myself besides my broken ass shit pile Commode) and some mods to go along, and I am just a dabbler, so think, you could be cruising in your modded R35 with after market quad turbo's.

Don't listen to the real estate agent, they are paid to sell, look into the property in the area you are thinking, look at the returns, the location, the number of property for sale in the area, what is popular (houses, units etc).

Lots of stuff to check out, that's half the fun though.

Guest wilco

Oops, yeah you can claim the interest used for investment purposes, say:

Unit $200k

Car $50k

Loan = $250k

Claimable interest on loan = 80%

Make sure you keep GOOD records too. Rare to be auditted but if you are you'll need to show how you arrived at your numbers.

The other thing, is on investments you usually would not have an interest/principle loan, you just repay the interest, leaving more money in your land to use for other things (logically other investments), and you would not want interest only on your car loan (don't know if they woulkd even allow this as it would probably be considered some sort of All-In-One loan). You'd need to check this out.

Car loans are the work of the devil, I'd keep if seperate if I had a car loan at all, and pay it off quick smart, or better still don't take a loan out on a car, put your money into an investment or just leave it in ING at 4.75% as a worst case.

Also as I saw someone mentioned, interest rates are low, and are expected to drop again twice more this year by .25% each time, but 10 years ago interest rates were at 10.5%, and they will probably go back there in the next ten years, so you don't want to be over extended when that happens. Make sure if rates go up, you can afford it. In the last few years they have varied from about 5.5% to 7.5%, and that is just since I have been playing.

Remember if you are negative geared you are still losing money. You want to try and make it a neutral investment, or worst case positive geared. Neagative gearing is acceptable once you are at the top tax bracket barely ($62501+ as of next fiscal year). And once you are there, you have the feasable option of salary sacrficing into a novated lease to buy a car :P

Tax is a f*&king mess, lucky you are starting now :P

Originally posted by BigDatto

Work your ass off for the next few years, you'll have enough equity in the property to buy *whatever * vehicle you desire thru a line of credit at 4-5% rather than crippling yourself now

I couldn't agree more. If you get the car first, and decide to get an apartment later - let's face facts - you won't want to get rid of the car! that's the mistake I made. It's smarter to get rich first, and then get the car. You'll be able to buy it with pocket-change :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • For once a good news  It needed to be adjusted by that one nut and it is ok  At least something was easy But thank you very much for help. But a small issue is now(gearbox) that when the car is stationary you can hear "clinking" from gearbox so some of the bearing is 100% not that happy... It goes away once you push clutch so it is 100% gearbox. Just if you know...what that bearing could be? It sounding like "spun bearing" but it is louder.
    • Yeah, that's fine**. But the numbers you came up with are just wrong. Try it for yourself. Put in any voltage from the possible range and see what result you get. You get nonsense. ** When I say "fine", I mean, it's still shit. The very simple linear formula (slope & intercept) is shit for a sensor with a non-linear response. This is the curve, from your data above. Look at the CURVE! It's only really linear between about 30 and 90 °C. And if you used only that range to define a curve, it would be great. But you would go more and more wrong as you went to higher temps. And that is why the slope & intercept found when you use 50 and 150 as the end points is so bad halfway between those points. The real curve is a long way below the linear curve which just zips straight between the end points, like this one. You could probably use the same slope and a lower intercept, to move that straight line down, and spread the error out. But you would 5-10°C off in a lot of places. You'd need to say what temperature range you really wanted to be most right - say, 100 to 130, and plop the line closest to teh real curve in that region, which would make it quite wrong down at the lower temperatures. Let me just say that HPTuners are not being realistic in only allowing for a simple linear curve. 
    • I feel I should re-iterate. The above picture is the only option available in the software and the blurb from HP Tuners I quoted earlier is the only way to add data to it and that's the description they offer as to how to figure it out. The only fields available is the blank box after (Input/ ) and the box right before = Output. Those are the only numbers that can be entered.
    • No, your formula is arse backwards. Mine is totally different to yours, and is the one I said was bang on at 50 and 150. I'll put your data into Excel (actually it already is, chart it and fit a linear fit to it, aiming to make it evenly wrong across the whole span. But not now. Other things to do first.
    • God damnit. The only option I actually have in the software is the one that is screenshotted. I am glad that I at least got it right... for those two points. Would it actually change anything if I chose/used 80C and 120C as the two points instead? My brain wants to imagine the formula put into HPtuners would be the same equation, otherwise none of this makes sense to me, unless: 1) The formula you put into VCM Scanner/HPTuners is always linear 2) The two points/input pairs are only arbitrary to choose (as the documentation implies) IF the actual scaling of the sensor is linear. then 3) If the scaling is not linear, the two points you choose matter a great deal, because the formula will draw a line between those two points only.
×
×
  • Create New...