Jump to content
SAU Community

Power Steering

d00dz
 Share

Recommended Posts

d00dz Grand Master

d00dz

Posted
Posted

Ermm

Ever since Ive had the car arrive from Japan, the steering has been very very heavy. @ all speeds. It's great for draging at WSID but shitty for windy roads and roundabouts!

Ive gotten used to it but it's pretty annoying now and then..

So what's causing this? (Ive had a search but nothing definiative with a solution.)

1. I think their is enough fluid in there. Not sure have to get it checked out.

2. The steering fluid box broken?

3. Speedo works.... pfc say the pump is working but I dont have the speed reading on the pfc (Only rpm, think the speed wire is cut at ecu wire loom)

4. Blocked lines?

5. Broken power steering?

Can anyone help?

Yes it's not just me other people say my steering is heavy, even Abobob said so! So must be heavy!

Link to comment
https://www.sau.com.au/forums/topic/176264-power-steering/
Share on other sites
Beer Baron Grand Master

Beer Baron

Posted
Posted
3. Speedo works.... pfc say the pump is working but I dont have the speed reading on the pfc (Only rpm, think the speed wire is cut at ecu wire loom)

i would look at correcting this. you may find it magically solves your steering problem. also look in your power steering fluid resevoir and see if there is any fluid in there would be a good place to start.

Link to comment
https://www.sau.com.au/forums/topic/176264-power-steering/#findComment-3225633
Share on other sites
d00dz Grand Master

d00dz

Posted
  • Author
Posted

Hmm yea Ive been meaning to rewire the ecu. Been lazy for last xx months lol

In the resevor you are suppose to see fluid? Because I think I see some well according to that little guide under the resivor cap it says it's full... hmm will check this on Saturday when there is light.

Link to comment
https://www.sau.com.au/forums/topic/176264-power-steering/#findComment-3225925
Share on other sites
d00dz Grand Master

d00dz

Posted
  • Author
Posted

nope HIcas light is off... Ive only seen it go on when I had water in my coils and car was jerky.. So I dont think it's the hicas.

I do have power steering but just very stiff like my steering is on viagra or something :)

It may be the speed wire, as Duncan/Richard has said which makes sense ey. I'll have a look at rewiring it soon...

Hopefully this fixed means I can go drift around round abouts weeeeeee lol :)

I'll report back when Ive done the wiring fix!

Link to comment
https://www.sau.com.au/forums/topic/176264-power-steering/#findComment-3228524
Share on other sites
d00dz Grand Master

d00dz

Posted
  • Author
Posted

So anyway didnt need to rewire the speed wire, it had one of those connectors..

Now my pfc controller tells me what speed im not going! Didnt happen before.. lawl.

Also checked the resivior and it's full.

Perhaps it maybe the steering line or something blocked in the lines. or maybe the pump is dieing?

go to the gym turd!!

LOL :P

Maybe i'm paranoid, but when I move the steering on Missturbos car and also drove Haysey's car awhile back and it is ALOT lighter than mine! Much like how the rolla steers.

Could it also be the tyres i'm running? larger tyres? But this shouldnt be the case.

dammit! :D:happy:

Link to comment
https://www.sau.com.au/forums/topic/176264-power-steering/#findComment-3228838
Share on other sites
GTS4WD Grand Master

GTS4WD

Posted
Posted

Stupid question..

I suppose you would notice the boiling temps by now..

But if your power steering belt the right size/tightented/not too tight?

Is there enough Power steering fluid?

Pump working?

All hoses connected?

Link to comment
https://www.sau.com.au/forums/topic/176264-power-steering/#findComment-3231394
Share on other sites
  • 2 months later...
DaShMiEsTeR Enthusiast

DaShMiEsTeR

Posted
Posted

having the exact same issue but with the HICAS light on in my r32 GTST

Speedo not working - RPM working

steering is really tight at low speeds

getting it looked at soonish.

any idea how much it should be to get this fixed?? anybody ?? :P

Link to comment
https://www.sau.com.au/forums/topic/176264-power-steering/#findComment-3359633
Share on other sites
d00dz Grand Master

d00dz

Posted
  • Author
Posted

I got this fixed...

Problem was...

Power steering pump, the filter was being clogged and hence lower power steering pressure and also it was leaking. Got it reconditioned and car is like a brand new car, ive never driving it with such ease.

Also the soloniod at the steering rack was not grounded properly (not sure what this does but I assume it's the >100 speed to make the steering slightly heavy when at high speeds). Because I notice now that at low speeds steering is easy, then as I get on the hwy the steering is heavy abit to counter the light steering.

Link to comment
https://www.sau.com.au/forums/topic/176264-power-steering/#findComment-3361387
Share on other sites
DaShMiEsTeR Enthusiast

DaShMiEsTeR

Posted
Posted
I got this fixed...

Problem was...

Power steering pump, the filter was being clogged and hence lower power steering pressure and also it was leaking. Got it reconditioned and car is like a brand new car, ive never driving it with such ease.

Also the soloniod at the steering rack was not grounded properly (not sure what this does but I assume it's the >100 speed to make the steering slightly heavy when at high speeds). Because I notice now that at low speeds steering is easy, then as I get on the hwy the steering is heavy abit to counter the light steering.

how much did it cost? or did you just do it urself?

Link to comment
https://www.sau.com.au/forums/topic/176264-power-steering/#findComment-3361430
Share on other sites
BHDave Grand Master

BHDave

Posted
Posted
having the exact same issue but with the HICAS light on in my r32 GTST

Speedo not working - RPM working

steering is really tight at low speeds

getting it looked at soonish.

any idea how much it should be to get this fixed?? anybody ?? :D

Your speedo cable is broken. get a new one and install it and it will fix all your issues.

Link to comment
https://www.sau.com.au/forums/topic/176264-power-steering/#findComment-3362014
Share on other sites
made_guy Experienced

made_guy

Posted
Posted
I got this fixed...

Problem was...

Power steering pump, the filter was being clogged and hence lower power steering pressure and also it was leaking. Got it reconditioned and car is like a brand new car, ive never driving it with such ease.

Also the soloniod at the steering rack was not grounded properly (not sure what this does but I assume it's the >100 speed to make the steering slightly heavy when at high speeds). Because I notice now that at low speeds steering is easy, then as I get on the hwy the steering is heavy abit to counter the light steering.

+1 on how much...?

been meaning to get this fixed on my car too - i can see if leaking from the p/s components above the rubber sleave on the drivers side.

Link to comment
https://www.sau.com.au/forums/topic/176264-power-steering/#findComment-3363946
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • EndZee
      Fuel Pump Control Module & Dropping Resistor

      By EndZee · Posted

      Guys since i bought r33 gts25t coupe 1994 automatic a/t(manual swap 350z gearbox)  all i got is problems, always problems. Lets start with that when i turn key into ignition(ON) fuel pump doesnt always works. Sometimes i have to turn key twice Off/on/off/on until it primes. Its new, dw300 - 340lph. My gearbox broke so i did gearbox swap, install different intake manifold, injectors and i take pipes. Car was sitting in garage for more than half a year. I did assembly all not that long ago and when i turn ignition cant hear prime. All of sudden it stopped working. Theres many videos on YouTube how to make relay mod on r33 straight from battery so i did and it doesnt work! 😰 30 - battery positive  87 - positive from fuel pump to relay 85, 86 - one of two wires from original fuel pump wires(light blue, grey) and it didn’t work. so I check on ignition and took original BLUE relays wires from trunk, next to fuses. (I believe it’s IGN+ and ECU pin 18. it didn’t work…  tried connecting (IGN+ from og relay) and (ECU 104 from 1of4 FPCM wires) to my new relay 85/86 and it didn’t work.  I unplug FPCM. Didn’t work. im thinking what’s wrong   fuel pump is working, if I leave IGN+ on 85 and 86 straight to ground it works but it’s just nonstop. Since it getting constant 12v after key in ON. light blue wire gives me 6-8v.  so how this should be connected? What causing ECU not giving — on pin? Or I did sth wrong and that’s why it doesn’t work? I need negative signal on ECU that control fuel pump. What this should be?
    • Duncan
      M35 Brake caliper replacement

      By Duncan · Posted

      You can use your VIN to look up the factory part number somewhere like amayama, and then look to order new if necessary. https://www.amayama.com/en/genuine-catalogs/nissan Depending on price you might want to rebuild instead. @GTSBoy I had an interesting insight into US market parts when the Titan rear calipers were sticking. New calipers were dirt cheap, about 20% more than a rebuild kit....they are just considered throw away maintenance items
    • Duncan
      Most women will agree that parking is the most taxing part of driving

      By Duncan · Posted

      Funny, but really not funny. Thank god (most) f the world has moved on since then
    • Duncan
      Jacks that fit under GTR lips that can reach the subframe?

      By Duncan · Posted

      Lots of votes for driving onto a plank first; that is the quickest way I've found, 25mm is enough for my case but that will vary by car It also depends where you are going for. On the 32 I can get to the rear diff with my floor jack if I do that end first, and get it up on stands. Then I lift the front from either front tow hook as high as needed, also onto stands. Sometimes I need a small lift on the other tow hook to get it level enough If I do the front first I can't get to the rear diff because of the angle of the car Other options are getting to the front mount of the rear subframe from in front of the wheel (if only lifting one side, or just do both which is a bit of a pain compared to one lift from the diff), or also the gearbox cross member mount on the driver's side if you are  just trying to lift the driver's side. I This is the jack I use; it says 75mm clearance but of course that is only on the lower section so if you have to reach too far in like the diff you still get stuck. https://www.snapon-bluepoint.com.sg/category/Floor-Jacks/product/Floor-Jack,-2-Ton-Low-Profile
    • Duncan
      NC MX5

      By Duncan · Posted

      On the bright side, the weather will turn much nicer for working outside shortly....sounds like you might need to start on a neighbour's garden next
×
×
  • Create New...