Jump to content
SAU Community

Recommended Posts

The engine is out of my r33 gtst that went 10.5 @ 125mph a couple of months ago, new setup is being built so this stuff has got to go!

RB25 long motor, sump to rocker cover, has forged pistons, shot peened rods, prepped crank and block, ported head, genuine nissan head gasket, tomei 256degree poncams, tomei exhaust cam gear. this engine made 480rwhp with 24psi through a gt3540. runs perfect and comp tested perfect before being pulled out of the car. $5000 or very close offer!

polished plazmaman plenum, bolt's to standard runners, 600x300x75 intercooler with polished alloy pipes and turbosmart bov to suit the plazmaman plenum, incuded is the exhaust manifold to suit a gt3540 and a 38mm wastegate but no turbo and gate. plenum cooler with pipes and exhaust manifold $2450 or very close offer!

850cc sard injectors(side feed) with rail and sard reg $850 or very close offer!

apexi power fc and z32 afm with harness $1000 or close offer!

or the complete engine with all the above for $8500, all you need is a 3540 and a gate and you got a reliable 10 sec package!!!!!

Als raceglides built c4 auto, full roller bearing, all the good gear inside, deep pan, transbrake, 3500rpm converter and a b&m pro ratchet shifter and tailshaft for r33. $4200 or close offer! box is awsome and still usable on the street!

offers only by pm or you can call Alex on 0413 311 919.

Edited by CRNAGE
Link to comment
https://www.sau.com.au/forums/topic/176318-fs-rb25-10sec-setup/
Share on other sites

Hey mate. Do you have any more specs of the auto. What power was it built to handle??

what specs are you after? it will cop 800hp no prob, this box will go in the 9's!!!

Where you located i want that power fc. Does it come with the hand controller and the wiring set up for a series1. P.M me asap........ P.S is his for a manuel

Edited by spudsr33
Where you located i want that power fc. Does it come with the hand controller and the wiring set up for a series1. P.M me asap........

sydney, no hand controller and yes its for series 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...