Jump to content
SAU Community

Recommended Posts

[Mark here... This is seans car, he crashed it and done a bit too much structual damage so we are writing her off and selling bits.. its repairable. but requires chassis rail alignment and a bit of cash.. and would rather build a RB25Neo 180sx/s13... so will trade alot of parts and or cash for a working/regoed 180sx/S13 with a clean body. if you know of any there will be a small spotters fee aswell. :(. must be rust free clean, good interior. dont care about engine.. prefer CA18 and manual :rofl:

Sean has made this ad using my account and all enquires should be directed to him on 0417784987 NO SMS. -

you can also call me on 0400 793 618. NO SMS' thank you.

thanks

mark.]

R34 2dr GTT Tiptronic

Purchased as a Grade 4.5 car and is extremly clean.

colour is pewter

Motor has 55,000ks on it

has a full turboback exhaust Jasma/blitz cat back with unknown high flow cat. flyn front and dump

interior is mint no damage at all

tail lights are still good

all glass is good.

RHF guard is good but scratched on top. also have LHF headlight lense with scratches on it.

rear subframe (bent RHR LCA) $700 with diff.

Diff perfect condition recently serviced $350.

Coilovers are fully adjustalbe Ohlins (top model for the R34 when purchased) that retail close to $5000(including fitting weight corner balancing) new used for round 10,000km

also have some volk TE37s 18x8.5 n 18x9.5 wrapped in POTENZAz Re040 235/40/R18 and RE01 265/35/R18 on the rear one with minor damage and one needing repair ... tyres have 70%-80% all round fronts are 2 months old.

unfortunately front n rear bar, front right guard, boot are damaged, also had a front mount but only the core is left... (JJR Bar and plate type 2 very similar to the Trust kits)

just let me know what you want and asking price :rant:

can take pics of anything if needed

and welcome people to come round and have a look.

cheers

PS. please only post if you are interested in items thanks. :rofl:

post-25555-1184312835_thumb.jpg

post-25555-1184313083_thumb.jpg

post-25555-1184313262_thumb.jpg

post-25555-1184313758_thumb.jpg

post-25555-1185354854_thumb.jpg

post-25555-1185354919_thumb.jpg

Edited by markimak
Link to comment
https://www.sau.com.au/forums/topic/176434-wrecking-r34/
Share on other sites

  • Replies 63
  • Created
  • Last Reply

Top Posters In This Topic

holy batman..what happened??!!

Might be interested in the lower dash console piece depending on how much u want for it. Mine's got a broken clip on the right hand side and never sits flush.

See pic circled in red.

post-6973-1184315744_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/176434-wrecking-r34/#findComment-3228074
Share on other sites

thanks mark

for the one interested on the intercooler i jst took a pic as it was straight off the car, sorry if its DIRTY !! no real big scratches on it does hav a lil coolant stain or sumthin on the left that ill kinda wipe off n take another pic if u think its hidin damage

post-25555-1184671492_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/176434-wrecking-r34/#findComment-3234746
Share on other sites

im interested in the turbo back exhaust.. is it in good condiotinon and info on it?

If it has the factory pop up GPS.. where did they put the 3 gauges??

Edited by Silver_R34_GT-T
Link to comment
https://www.sau.com.au/forums/topic/176434-wrecking-r34/#findComment-3235027
Share on other sites

im interested in the turbo back exhaust.. is it in good condiotinon and info on it?

If it has the factory pop up GPS.. where did they put the 3 gauges??

I'll try to be of some assistance, hope u dont mind marki....

The catback is Jasma and sounds really sexy, probably the best RB25 rumble I've ever heard. The dump/front section is from FLYN performance and set Sean back $280 not even 3 months ago. I'm pretty sure the cannon is the only part with a few dings on it, have to wait for Mark or Sean to reply for confirmation there. It's a quality system and you wont regret coming down to have a look I'm sure.

The 3 gauges were an optional extra that the original purchaser obviously didn't bother with, not all GT-T's have them.

Link to comment
https://www.sau.com.au/forums/topic/176434-wrecking-r34/#findComment-3235766
Share on other sites

exhaust as said above is a jasma catback, only one dent underneath the cannon pretty sure it will hav no effect on flow or make any leaks, front is from FLYN and did set me bak $280 i think only a month or so ago.

as stated R34s hav options such as 3 gauges, GPS/Nav/TV or nothing... this GTT got the luxury GPS one so ther is no gauges other than the ones on dash (oil pressure, fuel and water temp)

Link to comment
https://www.sau.com.au/forums/topic/176434-wrecking-r34/#findComment-3236005
Share on other sites




  • Similar Content

  • Latest Posts

    • Update 3: Hi all It's been a while. Quite a lot of things happened in the meantime, among other things the car is (almost) back together and ready to be started again. Things that I fixed or changed: Full turbo removal, fitting back the OEM turbo oil hardlines. Had to do quite a bit of research and parts shopping to get every last piece that I need and make it work with the GT2860 turbos, but it does work and is not hard to do. Proves that the previous owner(s) just did not want to. While I was there I set the preload for the wastegates to 0,9bar to hopefully make it easier for the tuner to hit the 370hp I need for the legal inspections that will follow later on. Boost can always go up if necessary. Fitted a AN10 line from the catch can to the intake hose to make the catchcan and hopefully the cam covers a slight vacuum to have less restrictive oil returns from the head and not have mud build up as harshly in the lines and catch can. Removed the entire front interior just shy of the dashboard itself to clean up some of the absolutely horrendous wiring, (hopefully) fix the bumpy tacho and put in LED bulbs while I was there. Also put in bulbs where there was none before, like the airbag one. I also used that chance to remove the LED rpm gauge on the steering column, which was also wired in absolute horror show fashion. Moved the 4in1 Prosport gauge from sitting in front of the OEM oil pressure gauge to the center console vents, I used a 3D printed vent piece to hold that gauge there. The HKB steering wheel boss was likely on incorrectly as I sometimes noticed the indicator reset being uneven for left vs. right. In the meantime also installed an airbag delete resistor, as one should. Installed Cube Speed premium short shifter. Feels pretty nice, hope it'll work great too when I actually get to drive. Also put on a fancy Dragon Ball shift knob, cause why not. My buddy was kind enough to weld the rust hole in the back, it was basically rusted through in the lowermost corner of the passenger side trunk area where the wheel arch, trunk panel and rear quarter all meet. Obviously there is still a lot of crustiness in various areas but as long as it's not rusted out I'll just treat and isolate the corrosion and pretend it's not there. Also had to put down a new ground wire for the rear subframe as the original one was BARELY there. Probably a bit controversial depending on who you ask about this... but I ended up just covering the crack in the side of the engine block, the one above the oil feed, with JB Weld. I used a generous amount and roughed up the whole area with a Dremel before, so I hope this will hold the coolant where it should be for the foreseeable future. Did a cam cover gasket job as the half moons were a bit leaky, and there too one could see the people who worked on this car before me were absolute tools. The same half moons were probably used like 3 times without even cleaning the old RTV off. Dremeled out the inside of the flange where the turbine housing mates onto the exhaust manifolds so the diameter matches, as the OEM exhaust manifolds are even narrower than the turbine housings as we all know. Even if this doesn't do much, I had them out anyways, so can't harm. Ideally one would port-match both the turbo and the manifold to the gasket size but I really didn't feel up to disassembling the turbine housings. Wrapped turbo outlet dumps in heat wrap band. Will do the frontpipe again as well as now the oil leak which promted me to tear apart half the engine in the first place is hopefully fixed. Fitted an ATI super damper to get rid of the worn old harmonic balancer. Surely one of the easiest and most worth to do mods. But torquing that ARP bolt to spec was a bitch without being able to lock the flywheel. Did some minor adjustments in the ECU tables to change some things I didn't like, like the launch control that was ALWAYS active. Treated rusty spots and surface corrosion on places I could get to and on many spots under the car, not pretty or ideal but good enough for now. Removed the N1 rear spats and the carbon surrounding for the tailpipe to put them back on with new adhesive as the old one was lifting in many spots, not pretty. Took out the passenger rear lamp housing... what do you know. Amateur work screwed me again here as they were glued in hard and removing it took a lot of force, so I broke one of the housing bolts off. And when removing the adhesive from the chassis the paint came right off too. Thankfully all the damaged area won't be visible later, but whoever did the very limited bodywork on this car needs to have their limbs chopped off piece by piece.   Quite a list if I do say so myself, but a lot of time was spent just discovering new shit that is wrong with the car and finding a solution or parts to fix it. My last problem that I now have the headache of dealing with is that the exhaust studs on the turbo outlets are M10x1.25 threaded, but the previous owner already put on regular M10 nuts so the threads are... weird. I only found this out the hard way. So now I will just try if I can in any way fit the front pipe regardless, if not I'll have to redo the studs with the turbos installed. Lesson learned for the future: Redo ALL studs you put your hands on, especially if they are old and the previous owners were inept maniacs. Thanks for reading if you did, will update when the engine runs again. Hope nothing breaks or leaks and I can do a test drive.
    • No those pads are DBA too  but they have colors too. I look at the and imo the green "street" are the best.
    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
×
×
  • Create New...