Jump to content
SAU Community

Recommended Posts

I bought my car from a dealer + when he explained the security in the car he said he'd left the stock immobiliser in + added the proximity sensor immobiliser as well, giving me 2 different immobiliser setups...

If I don't hit the 'unlock' button on my key remote, the car won't start. It'll keep turning over, but refuses to start. It self arms this as well. If I turn my engine off + don't lock the car, I still need to hit the unlock button to disable the security + start my car.

And of course if the proximity sensor isn't next to the ignition, the car won't start.

Link to comment
https://www.sau.com.au/forums/topic/176463-alarm/page/2/#findComment-3611471
Share on other sites

So the factory alarm is supposed to be stripped as part of compliance? If so, what is the little fob thing on the key chain for, and also the sensor looking things on the dash? Do they do anything?

who did the compliance on it? if ISASO then it was me that removed it. I've had 3 of them disable 3 cars on me so when I do the compliance immobiliser them they come out. its not factory anyway. they are dealer fitted and some of them are barely fitted. most are in with scotch locks and they are ALWAYS loose.

the black tag on your keyring(autowatch badged) is the Immobilser. two pt std issue. the round thing below the boot release switch that looks like something pushes into it does nothing.

Link to comment
https://www.sau.com.au/forums/topic/176463-alarm/page/2/#findComment-3612926
Share on other sites

hey guys,

just a quick note about the adr82/00.. if the vehicle is fitted with a factory immobiliser there is a way around having to replace it

dotars recognise the ULC-S338/98 which is the canadian standard for immobilisers (all vehicles in canada must be fitted with an immobiliser whether stock or aftermarket)..

The ULC-S338/98 does mention the Infiniti v35 so all you need to do is prove to dotars that the v35 and g35 have the same immobiliser (which you can grab of the Nissan Fast system)

We have been using this evidence for most vics and dotars have never questioned it...

hope this helps

cheers,

k

Link to comment
https://www.sau.com.au/forums/topic/176463-alarm/page/2/#findComment-3613715
Share on other sites

I'll apologise in advance for my lack of knowledge both in this area, and cars in general. So I have the keychain thing, the two sensors on the dash, a small light just under the clock that flashes once the keys out of the ignition, and a red light labelled "Security" to the right of the steering wheel. Do I have an immobilisor or an alarm, and if so, how can they be activated?

Also, I got the car from a dealer in Sydney who do their own compliance.

Sorry again, this isn't really my thing! If I was in Brisbane, I'd be over seeing Chris Rogers already!

Link to comment
https://www.sau.com.au/forums/topic/176463-alarm/page/2/#findComment-3615516
Share on other sites

word of advice- leave it all alone. if you activate it by mistake (IF it works- see other post ) then you have stranded yourself. if you have the nissan branded tag press it into the slot below the steering column. that will activate the dealer fitted alarm. the OE one 1s self triggered. the autowatch one is the same.

Link to comment
https://www.sau.com.au/forums/topic/176463-alarm/page/2/#findComment-3615654
Share on other sites

  • 4 years later...

any of the alberts stores. see cannington and speak to pete. get them to toss a autowatch 446 P in it.

Hi Chris,anyone you could recommend in Melbourne?

Edited by rawzz_v35
Link to comment
https://www.sau.com.au/forums/topic/176463-alarm/page/2/#findComment-6401388
Share on other sites

ok so stopped down at Alberts today. They are going to put in a slightly different system that runs off my car key. $550 installed.

Sound about right? I asked for the Autowatch 446 Premium, but Pete was talking something slightly different.

Once its booked in, I'll let you know exactly what it is :)

Thanks again!

Link to comment
https://www.sau.com.au/forums/topic/176463-alarm/page/2/#findComment-6405179
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Well it wasn't as easy as I thought.... and it also wasn't in my original manual which I did end up finding. They discuss the process in the Nismo catalogue though and it requires slight machining. Page 145.  NISMO PARTS CATALOGUE 2020
    • I'm an idiot, my intercooler is rated for 1000hp. I had clicked on the wrong product. Knowing the delta P would be nice, but I'm doubtful I'll do it. Now as for an EMAP, that would be great and I'll get around to it eventually but from my findings in my last post, I'm considering a turbo swap now. 
    • You sir, big win tonight. Precision never supplied compressor maps in the past and Idk when they started, but it seems they only offer for a few of the older gen2's which is exactly what I have. I punched in some numbers and seem to have gone with the wrong turbo. 600-700whp isn't in the most efficient area and is close to the choke line. 800whp is well off the map. Punching the numbers into a 68mm gen2 turbo map is bang on in the center. Here I was thinking going smaller would shift the power band down, but in reality it would just make it so much worst due to my rev limit. I would have never thought. 
    • Increasing overlap will bring the torque down earlier (and make your idle sound sick lol). Worth a shot (if you dyno time) to experience a bit (providing you are confident your valves won't kiss your pistons). Is to just take off 5 degrees across the boosted area of the map, and then retard the exhaust cam let's say, 3 degrees at a time and then overlay all the runs with VCT on all the way and VCT off as soon as you make positive pressure. Ideally you would have a total of 6x overlays to looks at 0 exhaust & VCT off once manifold pressure is +ve 0 exhaust & VCT on all the way -5 exhaust & VCT off once manifold pressure is +ve -5 exhaust & VCT on all the way -10 exhaust & VCT off once manifold pressure is +ve -10 exhaust & VCT on all the way Just leave your O2 wideband closed loop on for all of the boost area & RPM, and hopefully there isn't too much fuel correction needed and the Haltech is fast enough to compensate (I do this, then apply the correction to the main table). Getting that overlay data should give you a good indication of what to aim for.
    • So, my main limitation here is that the car does not have an oil pressure sensor by default, just a switch. As part of my tune I bought an oil pressure sensor upgrade so I now have access to oil pressure levels and logging rather than just the boolean behaviour of the switch but this means I need to use the tuning app to display this value. So, this rules out using any other app on the iPad. The app will also flash when pressure drops which is a nice feature. I have replaced the centre screen with an Android one, which is awesome for Android Auto, but I think it might be too far away and out of my line of sight. I might add some gauges to it this weekend and just see. I guess if its just temp and oil pressure I can make them massive! 🤣  
×
×
  • Create New...