Jump to content
SAU Community

Recommended Posts

I bought my car from a dealer + when he explained the security in the car he said he'd left the stock immobiliser in + added the proximity sensor immobiliser as well, giving me 2 different immobiliser setups...

If I don't hit the 'unlock' button on my key remote, the car won't start. It'll keep turning over, but refuses to start. It self arms this as well. If I turn my engine off + don't lock the car, I still need to hit the unlock button to disable the security + start my car.

And of course if the proximity sensor isn't next to the ignition, the car won't start.

Link to comment
https://www.sau.com.au/forums/topic/176463-alarm/page/2/#findComment-3611471
Share on other sites

So the factory alarm is supposed to be stripped as part of compliance? If so, what is the little fob thing on the key chain for, and also the sensor looking things on the dash? Do they do anything?

who did the compliance on it? if ISASO then it was me that removed it. I've had 3 of them disable 3 cars on me so when I do the compliance immobiliser them they come out. its not factory anyway. they are dealer fitted and some of them are barely fitted. most are in with scotch locks and they are ALWAYS loose.

the black tag on your keyring(autowatch badged) is the Immobilser. two pt std issue. the round thing below the boot release switch that looks like something pushes into it does nothing.

Link to comment
https://www.sau.com.au/forums/topic/176463-alarm/page/2/#findComment-3612926
Share on other sites

hey guys,

just a quick note about the adr82/00.. if the vehicle is fitted with a factory immobiliser there is a way around having to replace it

dotars recognise the ULC-S338/98 which is the canadian standard for immobilisers (all vehicles in canada must be fitted with an immobiliser whether stock or aftermarket)..

The ULC-S338/98 does mention the Infiniti v35 so all you need to do is prove to dotars that the v35 and g35 have the same immobiliser (which you can grab of the Nissan Fast system)

We have been using this evidence for most vics and dotars have never questioned it...

hope this helps

cheers,

k

Link to comment
https://www.sau.com.au/forums/topic/176463-alarm/page/2/#findComment-3613715
Share on other sites

I'll apologise in advance for my lack of knowledge both in this area, and cars in general. So I have the keychain thing, the two sensors on the dash, a small light just under the clock that flashes once the keys out of the ignition, and a red light labelled "Security" to the right of the steering wheel. Do I have an immobilisor or an alarm, and if so, how can they be activated?

Also, I got the car from a dealer in Sydney who do their own compliance.

Sorry again, this isn't really my thing! If I was in Brisbane, I'd be over seeing Chris Rogers already!

Link to comment
https://www.sau.com.au/forums/topic/176463-alarm/page/2/#findComment-3615516
Share on other sites

word of advice- leave it all alone. if you activate it by mistake (IF it works- see other post ) then you have stranded yourself. if you have the nissan branded tag press it into the slot below the steering column. that will activate the dealer fitted alarm. the OE one 1s self triggered. the autowatch one is the same.

Link to comment
https://www.sau.com.au/forums/topic/176463-alarm/page/2/#findComment-3615654
Share on other sites

  • 4 years later...

any of the alberts stores. see cannington and speak to pete. get them to toss a autowatch 446 P in it.

Hi Chris,anyone you could recommend in Melbourne?

Edited by rawzz_v35
Link to comment
https://www.sau.com.au/forums/topic/176463-alarm/page/2/#findComment-6401388
Share on other sites

ok so stopped down at Alberts today. They are going to put in a slightly different system that runs off my car key. $550 installed.

Sound about right? I asked for the Autowatch 446 Premium, but Pete was talking something slightly different.

Once its booked in, I'll let you know exactly what it is :)

Thanks again!

Link to comment
https://www.sau.com.au/forums/topic/176463-alarm/page/2/#findComment-6405179
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • KW only offers a set for the R32 GTR. Popular options are D2 racing, Ksport or Öhlins. I have a D2 Racing coilover set, though I don't know for sure which one.
    • Well, the good news is you have more than one very good option for new coilovers in and around your country. Worth the drive over to KW to talk about GTR stuff.
    • Fair enough, I am in no way a tire expert so I'm not familiar with all the terms and conditions. I'll definitely note down the AD09 to potentially try in the future. Rain is not too big of a concern for now as I will probably only drive in the rain when I have to. And considering I still lack experience driving the GTR I'd more than likely take it easy too. I have coilovers in the car but as I barely got to drive so far I never bothered to even check if they are adjustable haha. The suspension is almost entirely old and worn as well so I suppose when I eventually fix that in the future that would make a huge difference.
    • There's not a great deal to report here .... except ...... FOR .... LSD!!!  I bought a Quaife LSD from the UK and shipped it here .... Wish I'd just bought locally cause the shipping and duty was $700! But there were so many diffs used in the E90s I just wanted to be absolutely certain I was getting the right one so I spoke with a supplier in the UK who builds race cars and they have heaps of experience with the E90s.  I pulled the diff out which was seriously awesome - I've never done anything like that before, I must have watched 1000 videos on YT about it as well as consulting the Bentley manual. It was super easy in the end. The diff was delivered to the awesome folks at Hornsby Diffs and will be back in a few weeks. I also replaced the diff bushings with some Nolathane ones.  Really looking forward to getting it back and getting back to the track or even the skidpan.
    • yeah... the 13kg/mm springs weren't always in there, I had 10kg/mm but doing a few SMSP commanded heavier front springs. It's so good now going into T1 and T2, just need more seat time and real tyres.
×
×
  • Create New...