Jump to content
SAU Community

Recommended Posts

  • Replies 96
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

because at the moment your probably looking at $300 to $450 worth of setup costs and about $60 a top just for embrodery!!

thats if you go to a place that has over heads to pay etc, i know of a place that would be able to do it much cheaper and if its gonna be a group buy then it should be cheaper once again, they even sell the jumper etc.

it really comes down the size, how muich detail is involved etc, if it is kept quite simple with just writing (eg SAU-SA) then there is no set up costs, but when you start getting into real graphic stuff, eg the idea with the sa border line thing put on the back, that will cost a little bit more cause they will need to spend the time on it to make sure it is perfect.

like i said i know of a place and i can go find out how much we could be looking at.

jugz that looks really cool

and guys that would not be an expensive one to do either cause its simple, something like that might cost $10- 20(roughly). and the logo on the front about $5.

Edited by MissR34

glad everyone likes my designs :) here is tha modifications ppl hav suggested appreciate the feed bak, i'll still leave the SAU in tha lower corner of tha front hoodie though could make it as an option to how ppl may want to do it as in wether its there or not, it will give sum variation rather than everyfin being generically tha same or even hav it on the reverse side on the back possibly ? i duno abit more options for different tastes i guess, but each is for there own :( if ya hav ideas ya want to chuck in dont hesitate to say :) and i'll do mah best to work it in sum how :(

post-40092-1184546575_thumb.jpg

post-40092-1184546600_thumb.jpg

post-40092-1184547266_thumb.jpg

post-40092-1184547325_thumb.jpg

yeh that would b sweet to actually see everyone wear these so hopefully either her or sum1 can find sumfin cheap, costing, ive rang round sum places but dey havent been to keen on custom designs, so yeh fingers crossed to see these get made :P

glad everyone likes my designs :D here is tha modifications ppl hav suggested appreciate the feed bak, i'll still leave the SAU in tha lower corner of tha front hoodie though could make it as an option to how ppl may want to do it as in wether its there or not, it will give sum variation rather than everyfin being generically tha same or even hav it on the reverse side on the back possibly ? i duno abit more options for different tastes i guess, but each is for there own :) if ya hav ideas ya want to chuck in dont hesitate to say :) and i'll do mah best to work it in sum how >_<

awsome work...i luv the 1st 2 pics.

thats if you go to a place that has over heads to pay etc, i know of a place that would be able to do it much cheaper and if its gonna be a group buy then it should be cheaper once again, they even sell the jumper etc.

it really comes down the size, how muich detail is involved etc, if it is kept quite simple with just writing (eg SAU-SA) then there is no set up costs, but when you start getting into real graphic stuff, eg the idea with the sa border line thing put on the back, that will cost a little bit more cause they will need to spend the time on it to make sure it is perfect.

like i said i know of a place and i can go find out how much we could be looking at.

guys let MissR34 check her contacts and im sure she will get back to us soon

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
    • You have a knack for photography my friend. It makes the 86 look like a complete bucket. The 34 went with you to Europe and back. It's special. (we all feel the same about our 'shitboxes' that every bystander seems to absolutely love)
×
×
  • Create New...