Jump to content
SAU Community

Recommended Posts

hey

I need help with this badly as this is giving me a headache.At idle when the car is warm and it stops for bout 30 sec at the lights the cars fine but then bout to seconds later the idle bounces from 900 to 400 rpm over and over agian then trys to stall. okay i have cleaned one of my idle valve control units on the top of the car and it didnt work, and we presurised the engine for leak and still nothing. it only happened since we put the new turbo on. So i am asking foe help pls

thankx

Link to comment
https://www.sau.com.au/forums/topic/176559-idle-problems/
Share on other sites

hey

I need help with this badly as this is giving me a headache.At idle when the car is warm and it stops for bout 30 sec at the lights the cars fine but then bout to seconds later the idle bounces from 900 to 400 rpm over and over agian then trys to stall. okay i have cleaned one of my idle valve control units on the top of the car and it didnt work, and we presurised the engine for leak and still nothing. it only happened since we put the new turbo on. So i am asking foe help pls

thankx

hey mate i had exactly the same problem as you untill yesterday, i had it preasure tested aswell but it turned out to be a rubber seal that had deteriorated, it wasnt noticable untill i went for a long and relatively high speed drive up the coast yesterday and completely blew it, im no mechanic so i dont know exactly what its called, but it has something to do with the intake manifold, the rubber seal almost looks like a small head gasket, when i speak to my mechanic on monday ill ask exactly what it was called, but it only costs about $70 to replace on a r33

Link to comment
https://www.sau.com.au/forums/topic/176559-idle-problems/#findComment-3229502
Share on other sites

clean air flow and still havn the same trouble with it. it getting annoying i can drive it and give it a boot fullnand its still okay until idle. Mods are a gt30/76 turbo, 3 inch exhaust, standard coil packs, emange ecu, 040 fuel pump,new oragnic clutch.

Link to comment
https://www.sau.com.au/forums/topic/176559-idle-problems/#findComment-3229733
Share on other sites

clean air flow and still havn the same trouble with it. it getting annoying i can drive it and give it a boot fullnand its still okay until idle. Mods are a gt30/76 turbo, 3 inch exhaust, standard coil packs, emange ecu, 040 fuel pump,new oragnic clutch.

definantly sounds like an air leak

Edited by 33drifter
Link to comment
https://www.sau.com.au/forums/topic/176559-idle-problems/#findComment-3229805
Share on other sites

any ideas where but we have ckecked everywhere

if its vacumn leak you can spray water along all intake manifold hoses, its a primitive way of finding a leak but always works as it will draw in water and the car will stall or idle really rough, u can use carby cleaner along intake manifold gasket see if thats leaking, however in saying that it sounds like afm meter but u said u have cleaned it, it may be the reversion of air coming back into the afm due to the bigger turbo, have u still got the mesh in the afm ive heard that helps.

Link to comment
https://www.sau.com.au/forums/topic/176559-idle-problems/#findComment-3230146
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • GTSboy, thank you again. i’ve been reading all the other SAU RB25 vacuum line threads and you have the utmost patience for people asking “where do my vacuum lines go”. it’s appreciated. i did also enlist a few other RB guys local to me.  i would like to run 5 to 4. turbo pressure side to wastegate actuator. i would like to run 3 to 1. power steering air valve line to intercooler outlet. (this is how it was previously). i was told 2 is the bleed port for the boost solenoid - which i’m not running - so should be capped.   anyone see any problems with that?    
    • So yes. All of them. Something like 98% of all fuel in the USA has 10% ethanol: https://afdc.energy.gov/fuels/ethanol-fuel-basics It's labelled as like, AKI, 87, 91, 93 with an E10 or E5 or E15 label on the pump. At a certain point, it's not just "E10" instead of 91. It is 91, 95, 98, and all of them have 10% Ethanol in them. You can also get E85 and E30 which is why you do see some people rolling around with E30 tunes in them.
    • Thanks for the response. This is an 04 EP3 Type R. JDM spec. Fairly certain they're just basic BC racing coils. I do plan to keep as the ride quality on stock I've been told is pretty meh given Sydney roads. If I were to go down that avenue, does NSW require them to be a certain spec (close to original) etc?
    • Should have asked what is the car?
    • I've had two super conflicting experiences with blue slips. My 30 year old E39 waltzed through with no issues but my brother in law was knocked back on 12 y/o 3 series due to wiper blades and some cracking in a control arm bush.  What kind of coil overs? Do you want to keep them after?  If it was me I'd get some dirt cheap shocks and springs from eBay or scumtree. Not ideal but will get you over the line and might even be less than $1k.
×
×
  • Create New...