Jump to content
SAU Community

R32 V Family...

billabong-john
 Share

Recommended Posts

billabong-john Collaborator

billabong-john

Posted
Posted

after the wifes barinaGSI stuffed its head gasket, it was decided that the babyseat was to be fit into the R32 as the wife said we "just could'nt afford the $1000 repaire bill for the holden, but she would'nt mind a new car :( " Well i fit the seat like a good husband and drove the family around crammed in like a boat full of refugees until i finally lost my temper and settled on a new car

and here is my new family wagon

post-31085-1184539527.jpg

post-31085-1184539547.jpg

By the way i still got my way in the end... ive still got the skyline :)

Link to comment
https://www.sau.com.au/forums/topic/176701-r32-v-family/
Share on other sites
billabong-john Collaborator

billabong-john

Posted
  • Author
Posted

Your right GTST anyone can get finance..lol

and as for the legnum the wifes only 20 and i think 280bhp of twin turbo motor might be to much for here at the moment.. The magna is'nt to slow mind, it still has a 140kw 3litreV6 with 255Nm of torque.. More than enough for the wife as it is a bit of a step up from the 1.6barina..lol.. only trouble now is that im stuck with three bloody cars :D

Link to comment
https://www.sau.com.au/forums/topic/176701-r32-v-family/#findComment-3231934
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • cosline
      R32 gtr transmission strength, billet plate

      By cosline · Posted

      Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • Piggaz
      R32 gtr transmission strength, billet plate

      By Piggaz · Posted

      You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • MBS206
      R32 GTS (RB20DE) Injectors Replacement

      By MBS206 · Posted

      Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • The Bogan
      NC MX5

      By The Bogan · Posted

      So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • GabsReDeal
      R32 GTS (RB20DE) Injectors Replacement

      By GabsReDeal · Posted

      It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
×
×
  • Create New...