Jump to content
SAU Community

Recommended Posts

Hey guys,

just wondering if any knows anything about the fuel warning light. My light doesn't come on when i'm low on petrol. checked the globe and thats fine and the fuel gauge is working. anyone had this problem? and can someone lead me in the right direction to fixing this.

Link to comment
https://www.sau.com.au/forums/topic/176835-fuel-warning-light/
Share on other sites

Light only comes on when you have less than 10L left, mine came on for the first time last week. What lead you to believe the fuel warning light was faulty? Did you run the car to empty with no warning or is it just the gauge, if its the gauge don't be alarmed, pretty much everyone on here with 33s has the same problem and from what i can remember its from a dodgy fuel sender which has more than likely fallen off its perch inside the fuel tank, this is why you get weird readings (mine never reads more then 3/4 full even when i fill it up and will sit there for about 200km then work its way to empty).

If you did run it empty... well then your in for all sorts of fun with that :P Otherwise just fill it up and reset the trip meter, drive it for about 300km and fill it up again, note how much you have to fill it up to get to a full tank again (full r33 tank is around 65L) so say you did 300km and used 40L well next time drive till 350km and see how much to fill up a full tank, repeat until you are left with 10L at refill (leeway for occasional hoon behavior :D) and just remember to reset the trip meter every refill and drive till that set kms (I fill up and drive 350km before heading to the local BP)

Or if you want to be gung ho and not a lazy sod, you can pay someone to fix it and not worry about any of the stuffing around remembering numbers

my fuel light has only ever come on once. and that was only because i wanted it to, because i was asking myself the same question as yourself, David.

My fuel gauge was actually sitting on empty, and after driving around 100km whilst sitting on empty, the light decides to come on....

So, quite a similar situation to what Baconer has explained.

every time my fuel gauge would hit the empty mark, i would go and fill it; and i would only be able to fill around 40 litres!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Initially I thought having a pair of Recaro seats would be a big bonus, it turns out these do get a little uncomfortable on long journeys (my fault, not the seat). I had a look through the GSM Performance website at reclining seats and booked an appointment to visit their show room. I got the Recaro Sportster CS for the R34 from here, was very happy with the service received so of course a re-visit was in order. Unfortunately the two Corbeau seats I had chosen aren't on display but they had 4 other options available. Two seats dug into my back, one dug into my legs and the other was perfect. I also found out that Recaro seats use a larger bolt pattern so some adaption was required. Luckily GSM offer some universal adaptors that should solve this problem. I searched the interwebs for price comparisons and Corbeau themselves were the cheapest at £300 cheaper (for the pair). I asked GSM if they could price match, unfortunately they couldn't. I later received an email saying Corbeau would honour them the same discount, but the purchase was already made. I did however order the brackets from GSM, both arrived on the same day. I started with the passenger side seat, knowing this was going to be a little trial and error. There are 3 mounting holes at the front and 2 at the rear on these JURAN Racing seat rails.  With the adaptor brackets mounted, the allen cap bolts started to push into the seat, NOT GOOD!  The rear mounting holes lined up but there were issues at the front. The holes were 1/2 hole out, so the brackets got a tickle with the drill to modify the holes. The supplied bolts weren't going to be long enough and a spacer was needed to stop the adaptor bars from bending. A local fasteners company supplied be with some nylon spacers and longer bolts (M8x30, although these will be replaced with 35mm long shortly) A before and after I pre-drilled the front bracket before making a start on the driver's seat to save some time. And in no time at all that was in the car too. The all black seats have transformed the interior and these are MUCH more comfortable. The only downside with the new Corbeau seats is I sit a little higher, but I'll happily accept that over discomfort. The Youtube video can be found here: https://www.youtube.com/watch?v=wPyttKPktXA
    • All 3 I guess. The car came with the JASI Aero 4 door Type R Full Kit unpainted so this was one thing at the top of my list to complete then I noticed there were body panels parts for this kit so i picked them up along with some black mesh to fill in the front bumper and front side air vents. car is at a paint and body shop atm completing this work. Next I will be addressing the internal bells and whistles, great summer project I can do with the kids.  full interior removal - ,boys car sound deadening - pads and spray ,boys stereo, sound, lighting - Big 3, GTT or bigger alternator ,kids head lining - dye black add star lighting mod ,daughter. That's it for the next 5-6 months. I have some motor maintenance  work i have to plan out. oil filter relocation, gaskets, mounts. beyond that, mind is starting to turn over if i can use a DET intake plenum, block off turbo ports & pipe in a air intake.      
    • roller coaster of a ride. Alarm system was removed & main harness was repaired where possible. still no fix just random successful starts. moved on to the replacing the ignition switch and relay. well all this troubleshooting & repair has been going on, the car is at a paint and body shop being pushed around. Ive been going down there on odd days after work to get it sorted.     
    • 5th November if you want to come out for a spin wakfield
    • PROBLEM WAS BROKEN COOLANT SENSOR!!! Replaced with a new one and its running mint.
×
×
  • Create New...