Jump to content
SAU Community

Recommended Posts

Hi,

PICS: http://www.thegodzilla.com/car-parts-for-sale.php (scroll down)

Item: RB26 Sump/front dif, complete with Tomei baffel kit.

Description: good condition, comes with Tomei sump baffel kit installed.

Price: $520

Item: New RB26DETT Head Gasket

Description: Brand new Nissan head gasket to suit RB26 motor

Price: $50

Item: R32 GTR Standard front pipe

Description: Standard item, few scratches.

Price: $50 $20

Item: Highmount manifold for RB26

Description: Cost $1200 new... Still basically new like everything else. The wastegate flange has now been cut off so you can have one welded on to suit your wastegate.

Price: only $770

Item: Custom intake for single turbo Rb26

Description: Looks great. Made at Godzilla Motorsport. Comes with silicon hose and clip, ready to instal.

Price: only $170

Item: RB26 Big end bearings - Brand new.

Description: New, in box. Cost $85.15 new

Price: $60

Item: RB26 Main bearings - Brand new.

Description: New, in box. Cost $173.80 new

Price: $135

Item: Exedy Clutch

Description: From my R32 GTR. I had this clutch installed before it went on the dyno. So has done basically no kms.

Price: $700

Item: Revolution Billet Flywheel

Description: I go tthis at the same time as the clutch.

Price: $170

Item: 82ERK Number plates - BZERK

Description: Never fittd to a car, Never registered. Navy blue writing on a silver plate.

Price: $900

Item: HKS Pod filters

Description: Nothing wrong with them at all

Price: $110

Item: RB26 Alternator

Description: RB26 Alternator in good condition

Price: $100

Item: RB26 Water pump

Description: Bought it for rebuild, used only for short time on dyno

Price: $100

NEG on some items

pickup can be made from bulimba or bracken ridge.

parts can be sent Australia wide.

regards,

Drew

Link to comment
https://www.sau.com.au/forums/topic/177175-gtr-parts-aftermarket/
Share on other sites

pics of everyting here: http://www.thegodzilla.com/car-parts-for-sale.php"" target="_blank">http://www.thegodzilla.com/car-parts-for-sale.php

i am neg on most prices.. just not the brand new stuff like bearings, head gasket...

I'm interested in the manifold.. a few q's

who made it? chinese? japanese? australian? brand name?

what material is is made from?

is it just the wastegate flange that been cut off or the pipe?

Is the face of the flange still flat id you put a ruler acress it?

to suit T4 single entry pattern?

Cheers,

Mick

I'm interested in the manifold.. a few q's

who made it? chinese? japanese? australian? brand name?

what material is is made from?

is it just the wastegate flange that been cut off or the pipe?

Is the face of the flange still flat id you put a ruler acress it?

to suit T4 single entry pattern?

Cheers,

Mick

hi, im not sure of the manerial.

this cost me $1200 from hi octane

I have cut about 3cm of the pipe, plenty of room to weld a new flange.

the cut needs to be grinded flat.

this was to suit a gt3540.. not sure if thats T4 or not.

  • 4 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeh I think i'll message an old contact i had for ages that manages his own tyre shop now.. n tell him what i want n work with him before ordering..  Got this 17x9 +30 Driftteks on 245/45/17 PSR Drag Radials on the rear.. They fit well - for your reference in future - Rear guards  have been lipped in & minimal to non flaring of the rear Gaurds.    
    • If only it were that easy! I also needed to remove seats, shocks, brake calipers, send my car through a fence, and use measuring and ended up guessing because I didn't remove seats, shocks and brake calipers. It can be hard sometimes Can be a little more complex than 'just measure' if you want to truly measure the entire wheel through all of it's suspension travel. But if you aren't going for every last mm then yeah, you can check the space you currently have and guesstimate.
    • If you own a car, and it has wheels on it, and you know the offset of those wheels, and you have a measuring device, you have everything you need to work out if other wheels will fit.
    • Will this fit? but they are staggered set - RAYS 57DR SEMI GLOSS BLACK 18x8.5 +37 | 18x9.5 +38 5-114.3 STAGGERED SET   or If no go could just get a set 4's wheels of 18x8.5 +37 5-114.3 - would i run 8.5's 235s up front n 245's at the back if I do?   Thanks.        
    • Put a clamp on your return line. I have a feeling it's sucking air, and introducing bubbles to your fuel. With a lot of fuel, less problematic. I'd honestly be redoing all the lines in the tank and clamps on everything.   Also, you've given two different answers to the same question: Asked if being followed by the police you could get down to use the whole tank, you said yes you could, so long as you keep off boost. However, you then followed this up that free revving, it would also cause the issues. I'm doubting free revving is enough to make any noticeable boost on what is likely a decent sized turbo.   So now I have to ask, can you actually drive it lightly and use all the fuel, or does it break up even free revving? Also, have you put a fuel pressure gauge on it? Can you hear the pump change noise at all when you're having this issue?
×
×
  • Create New...