Jump to content
SAU Community

Close Ratio Gearboxes

maccattack
 Share

Recommended Posts

maccattack Proficient

maccattack

Posted
Posted

Just looking for a bit of feedback from those who have tried various close ratio boxes.

I have a GTR which is fairly heavily modified. I have a habit of breaking synchros and am looking for a gearbox that will be used primarily for road use and about 10% for track work.

Should I be going to mission (helical) gearset as opposed to dog gears?

Are dog gears (straight cut) driveable on the street?

I like the price of the OS Giken gearsets however I have heard that I should be looking at PPG's gearsets as they are far stronger.

Those who have either of these or can shed a bit more "user knowledge" on these it would be appreciated.

Link to comment
https://www.sau.com.au/forums/topic/177675-close-ratio-gearboxes/
Share on other sites
ssshonky Grand Master

ssshonky

Posted
Posted

Not speaking from user experience here but you might want to go and look at a PAR gearset.

Least they are over east vs overseas.

the only thing that might annoy you about straight cut is the whine they can generate.

but to get over that you could get straight cut 1-4 then 5th as non straight cut.

least then you can stick it in 5th to get a bit of peace and quiet.

saliya Rising Star

saliya

Posted
Posted

Hey,

you're talking about three different things.

* How the gear teeth fit together - helical, or straight cut. Helical gearsets

impose a lateral load on the gearbox but are quiet and generally used by OEM;

straight cut gearsets have no lateral load but make lots of noise.

You can get a combination set (e.g. straight 1-3, helical 5) so you can cruise

quietly yet have a strong-as-possible 1-4.

* How the gears are engaged - synchromesh, or dog engagement. Synchros

are regarded as nicer to drive and lower-maintenance, dogs permit faster (and clutchless)

shifting. Dogs can take up less space than synchros allowing for wider

(and stronger) helical or straight gearsets.

* The ratios of the gearbox - closer ratios allow for less RPM change between

gears and can suit a 'peaky' motor better than longer ratios.

If you're actually breaking synchros sounds like your shift technique could

do with some modification. This would be important even if you changed to

dog-engagement - even though the technique is different, bad shifting on

a dog-style box is probably more expensive than bad shifting a synchro box.

Regards,

Saliya

maccattack Proficient

maccattack

Posted
  • Author
Posted

Thanks for the feedback so far,

Yeah I'm aware of the difference in gearset types. The reason I was asking is for information on which may be best for the 90/10 usage of the car. Are dogboxes too noisy and clumsy for daily driving - should I be using helical cut for my application??

As far as breaking synchros - this usually is a result of track work. Generally it is 3-4. You can get around it by double clutching - but this doesn't help lap times.

Ultimately my questions are should I use, straight, helical, combo gearsets for 90/10 driving?

Are the OS Giken units any good or should I be looking at ther PPG which is reputably one of the strongest around??

Peter

scathing Grand Master

scathing

Posted
Posted (edited)
Are dogboxes too noisy and clumsy for daily driving - should I be using helical cut for my application??

Dog-engagement are completely independent of the cut of the gears themselves. You can have helical cut gears in a dog box, or straight cut gears with synchros.

Are the OS Giken units any good or should I be looking at ther PPG which is reputably one of the strongest around??

Also check out PAR for gearsets. I've heard good things about them, and they're Sydney-based so warranty and support should be easier to come by. They're strong enough that people overseas will buy them from us so they can't be all bad. They don't have Hollinger's reputation, but they also don't have Hollinger's pricetag either.

Edited by scathing
scathing Grand Master

scathing

Posted
Posted (edited)

Did you want to wipe his arse while you were at it? :thumbsup:

If he ran a search in the White Pages web site for PAR in Ingleburn NSW, he would find that PAR Engineering comes up as the first match (and only match in Ingleburn).

Give a man a fish and he'll eat for a day, etc....

Edited by scathing
  • 1 month later...
VB- Veteran

VB-

Posted
Posted

if your braking syncros,get a dog box with helical cut gears. will be a bit more difficult to drive, but should be easy enough to pick up, and will allow for full throttle upshifts (using the clutch is your choice) but with helical cut gears will remain quiet. if you dont have a problem with braking gears, i'd go for helical cut as your going to be driving on the street, the noise will sh*t you with straight cut gears

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • RP1421
      S15 Spec R

      By RP1421 · Posted

      As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • joshuaho96
      R32 GTS (RB20DE) Injectors Replacement

      By joshuaho96 · Posted

      I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
    • perry_r33
      R34 GTR Vspec Garage Sale - All must go!

      By perry_r33 · Posted

      Pm sent 
    • Robot
      Skyline v36 350GT sedan hunting on idle

      By Robot · Posted

      Hi,  Just joined the forum so I could share my "fix" of this problem. Might be of use to someone. Had the same hunting at idle issue on my V36 with VQ35HR engine after swapping the engine because the original one got overheated.  While changing the engine I made the mistake of cleaning the throttle bodies and tried all the tricks i could find to do a throttle relearn with no luck. Gave in and took it to a shop and they couldn't sort it. Then took it to my local Nissan dealership and they couldn't get it to idle properly. They said I'd need to replace the throttle bodies and the ecu probably costing more than the car is worth. So I had the idea of replacing the carbon I cleaned out with a thin layer of super glue and it's back to normal idle now. Bit rough but saved the car from the wreckers 🤣
    • GabsReDeal
      R32 GTS (RB20DE) Injectors Replacement

      By GabsReDeal · Posted

      After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
×
×
  • Create New...