Jump to content
SAU Community

Recommended Posts

  • Replies 433
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

if enough people go in to make it $229, i'm in

I've added you to the list as a maybe

Come on guys!

Where else are you going to get ADR approved hoses this cheap !!!!!!

Someone with a 32 gtst volunteer their lines damnit! :sleep:

I actually came across this guy on ebay and he said he could copy my R32 gtst ones. My car is off the road at the moment, so im going to send my standard lines down for him to copy.

So he should be able to do r32 gtst lines after next week.

Shaun.

So these come 100% ready to install on the car? No d*cking around at all?

If so i'm in!

All you need to do is take off your old hoses, and put these straight on...

What car you need them for??

Due to increasing pressure from imported braided hoses, BrakeWest have decided to sell their ADR approved hoses for $195 including delivery.

We just need a minimum of 10 people....

Mate my car DOES NOT have abs.

If that makes a difference to my order.

Cheers

BrakeWest are getting samples of abs and non-abs gtst's.

They suspect there will no difference, but when they want samples just to confirm.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • How dare you sell your unreliable Skyline and buy a reliable, Toyota/Yamaha car with a strong gearbox, torsen LSD and Toyota reliability. At least you won't need to worry about oil pumps, big catch can, oil restrictors, blowing off power steering belts, sheering off 3rd gear, failing ABS relays/pumps, etc.
    • Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • https://www.facebook.com/share/p/18rmVb1SKB/ 
    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
×
×
  • Create New...