Jump to content
SAU Community

Recommended Posts

I personally go over the whole engine bay by hand with a rag, using degreaser and WD40 then getting the air compressor onto it. It takes a while but it comes up a hell of a lot better. Then I have the piece of mind of not worrying about water getting onto starter motor or any electrical wiring for that matter.

Normally takes me 1-2 hours. Which includes taking pod off, crossover pipe and I even get under the car and give it a good clean.

I personally go over the whole engine bay by hand with a rag, using degreaser and WD40 then getting the air compressor onto it. It takes a while but it comes up a hell of a lot better. Then I have the piece of mind of not worrying about water getting onto starter motor or any electrical wiring for that matter.

Normally takes me 1-2 hours. Which includes taking pod off, crossover pipe and I even get under the car and give it a good clean.

agree with this method. NEVER spray water in your engine bay using a hose or high pressure system

Also never spray degreaser on and start car up without using compressor or rag on it, i know someone who has set their engine bay up in flames doing this (lucky he had fire extinguisher on him). Just take your time and the results will come.

I've done this quite a few times now. THe first time I just used degreaser and a rag and got most of the dirt off. But there was so much there. So, I took the coilpack cover off, packed it with absorbent towl stuff, then put it back on and blocked off everything important. Then I sprayed degreaser everywhere, and let if sit for while so that it really started cleaning up... Then I sprayed it off with a hose. I wasn't too keen on using a water compressor though just because of the electrics.

Since then i've pretty much done all that, except I didn't have to do it 2 or 3 times (degrease, rinse, degrease, rinse) because there isn't THAT much dirt.

Aftwards if you want a really nice shine (and smell...) then spray 'inox' on stuff (especially rubber things) and it gives it all a real nice glow. It only really lasts a couple of weeks though, so I wouldn't really bother unless you were going to a show and shine or something....

A few weeks ago, I sprayed a whole can of degreaser over everything enginey & dirty-lookin, and 5mins later sprayed it off at the car wash with "High pressure wash" - and then dawdled home to dry it out with the air compressor, then spray a mist of turps over/around the CoilPacks with the parts washer air-gun.

It wasn't enough - turns out there was still water sitting beneath the coil packs, where the compressed air couldn't blast it out. Sure enough, the legendary RB25DET weak-spark misfire came back . . . . so out with the coil packs, dried it properly, in with the WD-40 & RP-7, put it back together again. Mis-Fire gone.

so - moral of this story: Water tends to find the lowest part of your cam-valley . . . around the spark plugs !

You can get away with doing it with high pressure...

I would normally attack the engine bay with high pressure but again avoiding belts depending on the temp of the day...

If its a warmer day water is ok and will make no difference as it will just dry...(im talking summer)

As Adz has said lower parts of the car for sure... we all do an oil change and drip drip... thats when i would get a degrease onto it hard and then blast it to hell...

last time i did mine i actually got under the car and did it all by hand took ages!!!

I have had my engine bay looking like the bellow pic once, but tell you want it was a lot of work..

post-11799-1185235737_thumb.jpg

That pic was done all by hand and with no high pressure at all... as you can tell you can get an awesome effect if you spend the time on it...

i cleaned my engine bay with the degreaser and highpressure water both from the carwash. didn't really do all that much, but the water had no adverse affects at all.

i've got a series 2 though, so starter motor is down with the ecu (right?), and i covered the snorkle and a few other little bits with plastic bags.

next time i might try a canned degreaser.

yeah I'm down with the others and the high pressure clean

basically make sure it's a nice hot day, open your bonnet,

get your air compressor out, set to round 80-100psi, usually they come with a degreasing gun, put half water half degreaser into it, then use the nozzle to clean the engine bay, then let it sit for a few hours drying out, then use silicone spray on the engine/pipes

makes it look nice :thumbsup: and doesn't dry out or crack, that's what most car yards do as well, so if you are unsure, goto a car yard and ask to watch someone detail an engine bay :thumbsup:

or just take your car there, pay the money and get the interior, exterior and engine bay done at the same time, it won't be cheap though

Nice Plenum man :action-smiley-069:

As for washing with a high pressure hose or something my mate didnt use common sense and poped his igniter.

ive also been told you can ware out the loom casing after a while of high pressure rinsing, cant confirm that though.

I use both, high pressure for like the chasis and clean off the rest with a rag and degreasor

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You're not the first person that's said that about this car lol. A Touring wagon GT in Spark yellow mica would be the dog's danglies 😆 I will keep an eye out for a future purchase for sure. The seats are almost like the OEM Recaros... electric adjustment for fore/aft and tilt movements except reclining.   
    • Yes!! I love these! It's a shame its not the wagon though!   Thank everything that's holy that it doesn't have the interior of the Aussie delivered ones. Those seats are so much nicer.  
    • I'm both sorry and thankful that you do that. 
    • 2001 BE5D Subaru Legacy B4 RSK (3rd gen) EJ208 (pink injector) Twin Turbo 280PS 5-speed manual Full time 4WD "RSK" grade which means all of the above LQC option which means stock rear spoiler  I got it primarily to export to someone outside Japan who was interested. These BE5 Legacy B4 RSKs are going through a bit of a resurgence right know in Japan as they are one of the few cars from the "turbo, manual, RWD/4WD, 280hp gentleman's agreement era" cars that don't require stupid money to purchase. Which for some people might be a good opportunity to get as a base for restoration. If I can't find anyone to purchase it I will certainly be doing that myself over the long term. Why? Because it's properly fast in stock form, handles well enough for a GT sedan, there's still enough aftermarket and (if you can wait a while) genuine part support to make it a restoration candidate (<-- that will only get worse over time so it's a case of do it now or choose get a BL5 4th Gen). Mechanically it's fine, has only 89,200kms on the odometer. The problem with this car is that the body and exterior trims are weathered from at least the last 10 years being parked outdoors. I'm the 3rd owner, the first owner was the one that had it for 14 years and barely drove it, had a low-speed front impact (which didn't damage anything behind the radiator support) and got it fixed and sold it. The 2nd owner put most of the kms on it and parked it outside for the last 10 years, hence the door rubbers have seen better days but if you overlook those cosmetic details, it presents pretty nicely. There is some minor rust on the LH rear wheel arch which I'll have looked at too at some stage.  Also as you'd expect from a car this age, the clear top coat is gone, leaving a satin finish on the roof.  Mechanically it's fine (as you would expect from a car with less than 100K kms) but the steering does feel slightly vague around the centre position at higher speeds. So first on the list is to get the steering rack bushes looked at. There's also the Lock button on the remote which doesn't work, but the Open button does.... it means that the anti-theft system thinks it's always open? It seems like if you open the car and don't start the engine within 3 mins or so the anti-theft kicks in again without any beeps or signals. So if you got to start it after that, it won't. You have to push the open button again. That's how I understand it anyway. Just a small irritation but not a big problem to sort out. There's only one mod, the Wangan SPL muffler. Just a tad louder than stock. It's a really good mod for those who don't want to wake the neighbours but still want to hear a more prominent unequal length header EJ20 sound. Anyway I hope to get all those things done eventually, that is unless someone wanted to import it to their country from Japan (where I live). I'm open for negotiations as I really would like a Skyline... but this will definitely suffice in the meantime 🙂 *Disclaimer: This is how I picked it up from the dealer, minus the stuff on the back seat. I haven't cleaned the engine bay or done a thorough exterior clean, aside from spray painting the wipers. 
    • Wow, even with the Audi logo centre caps. I love OEM wheel mismatches. 
×
×
  • Create New...