Jump to content
SAU Community

Recommended Posts

Not sure what the book says, but bear in mind, I have an RB26, BIG fmic(heavy), Leather interior (heavy), HUGE brakes (very heavy), manual (light), and no sunroofs (light), so I had no idea what to expect. I weighed the car as I drive it: a small amount of odds and ends in it, spare on board, cargo mat, full tank, etc, and it came up at 1700kg neat (to the nearest 10kg). Unfortunately I could only talk the lady into an overall weight for no money down, so I'll go back with cash at a later date and get the front:rear weights as well.

This may or may not be news, but I found it interesting is all... :)

Link to comment
https://www.sau.com.au/forums/topic/178033-i-hit-the-weighbridge-today/
Share on other sites

Yeah, they're not light.

I took some junk to the tip (or Waste Management Centre, as they call them now) and on the way out it weighed 1735kg. That was with myself (about 65kg) and 1/3 tank of juice. Which I guess would take it down to about 1650kg tare.

But hey, XR6 Turbos are like 1800kg, so not so bad really.

It would be over 1800kg with a couple of people in it.

But normally its kerb weight thats listed in car specs, which is 1658kg for my S2 RS4. Not sure what it is for the autech.

Stageas are not heavy compared to SUV's and are fairly similar in weight to other wagons of the same size.

Yeah, they're not light.

I took some junk to the tip (or Waste Management Centre, as they call them now) and on the way out it weighed 1735kg. That was with myself (about 65kg) and 1/3 tank of juice. Which I guess would take it down to about 1650kg tare.

But hey, XR6 Turbos are like 1800kg, so not so bad really.

The one on Powers Rd in Seven Hills, Phil? I live right near that. Lucky for me we never smell anything.

My rego papers list my car as 1658kgs.

Yeah, they're not light.

I took some junk to the tip (or Waste Management Centre, as they call them now) and on the way out it weighed 1735kg. That was with myself (about 65kg) and 1/3 tank of juice. Which I guess would take it down to about 1650kg tare.

But hey, XR6 Turbos are like 1800kg, so not so bad really.

Yep, and I've got one of each. The XR6T has more mid range torque and beautiful suspension and ride quality, but I enjoy the extra spread of revs, the practicality and the "WTF is that" reaction that the Stagea provides.

Yep, and I've got one of each. The XR6T has more mid range torque and beautiful suspension and ride quality, but I enjoy the extra spread of revs, the practicality and the "WTF is that" reaction that the Stagea provides.

Same here.I have a XR6T ute and i weighed it at 1900kg with me in it.My mates XR6T sedan weighed in at 1870kg with him in it as well.Lucky we have 300+rwkw to get them moving :D

  • 3 weeks later...

Even though many write them off as a land barge when you compare them to the competition (instead of S13's and Skylines which isn't a fair comparision) they do come in under or close to most others out there (mind you I woldn't have expected a XR6T ute to weigh 1800)

Even though many write them off as a land barge when you compare them to the competition (instead of S13's and Skylines which isn't a fair comparision) they do come in under or close to most others out there (mind you I woldn't have expected a XR6T ute to weigh 1800)

Heavier chassis so they can carry a ton(not like a holden ute) and leaf spring rear end with solid diff housing.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I can see between the water jacket and cyl 3 there wasn't a hard line of combustion gas. It certainly appears that the issue is coming from there. Yes, checked the tension. All at 100ft lbs where I set them 5 years ago. These blocks can crack but generally when they have been over bored. Mine is only 0.5mm oversize at 89.5mm. They break between cylinders around the 91mm mark. No sign of that with mine. My gut feeling is the head gasket lifted a while back when the studs stretched and i bandaided it by retorquing the studs. It's finally let go.
    • My Nismo 1.5 churps a bit on reverse turns when cold, but besides that feels like a stock diff.
    • Yes, but, I paid cash and I'm pretty sure the receipt was in the bin 10 minutes after I got home Note to self, keep all receipts
    • Bunnings would have just handed you your money back on that one!
    • So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
×
×
  • Create New...