Jump to content
SAU Community

Recommended Posts

Heya guys,

I recently had a GReddy Pully Kit fitted to my R33 GT-R.

After a week of being on the road, the belt for the power steering pump pully has slipped what I would say is approx 1/4 of the belt width off of the pully.

This is quite concerning and I obviously want to get it fixed.

Can anyone shed any light as to how this has happened?

A few things I will clarify so it doesnt need to be asked:

Pully kit is definately BCNR33 RB26DETT - I bought the parts myself, got the original box, original instructions - everything is BCNR33 RB26DETT with Mitsubishi Alternator pully variant

Pully kit is definately installed the correct way around - exactly like the picture shows in the instruction book.

It was installed by a "performance" workshop while I was doing the timing belt and water pump at the same time.

Some pics:

P7300007.JPG

P7300002.JPG

P7300001.JPG

P7300004.JPG

I noticed when I first saw the pully kit installed that belt was at an odd angle, but stupidly I didnt think much about it at the time.

The belt in its "off" position now appears to be dead square with the engine, so where the belt is now appears to be exactly where it should be. Its just the pully doesnt match its position!

What I dont know is if the installer has missed putting something on, or if it does run at an odd angle and it requires a bucketload of tension to put on it during the installation. I will be speaking to the installer this week to ask, but I dont know how much tension was put on when it was done.

Does anyone know if its as simple as a part has been missed when installed?

The washer and bolt after the pully match perfectly to the end of the thread for the pump, so I cannot work out what is wrong here, unless Trust have given me the wrong part in the kit?

Cheers for any help anyone can give...

Edited by rb4door
Link to comment
https://www.sau.com.au/forums/topic/178731-trust-pully-kit-r33-gt-r/
Share on other sites

I thought this too, however its a dead match for the OEM pully taken off, and the offset of the pully appears perfect so it misses the High Pressure line of the pump coming over the front of it, and also sits pefectly over another bolt behind it and infront of the face of the pump :thumbsup:

Hitachi also made an alternator for the BCNR33...how did you check that Mitsubishi built it.

http://www.nengun.com/trust-greddy/pulley-kit.

Could the mechanic have got the pulleys mixed up?Is this possible? (Does this change anything?)

Could the mechanic have installed the pulleys back to front (Does this change anything?)

Could the mechanic forget a spacer?

Looks to me though that pulley in question has been installed back to front.

That bolt sticking out should be flush inside the pully

My 2c

I have this same problem. But mine is on an R32. p/s pump pulley sits a few mm too far in and hence the belt comes off and eventually snaps/shreds. I will be fitting a spacer to rectify the problem; or the pulley could be on the wrong way around...will get to inspect mine later and see if this is true.

Yeah the Hitachi alternator was Series 1 GT-R, possibly Series 2.

I have a Series 3 - with a Mitsubishi alternator. That pully is fine on the alternator, as is the waterpump pully.

Yeah one other mechanic from a GT-R garage made the same comment - that the pully is on back to front.

But the GReddy logo is only on the front of them. Instruction book also shows facing outwards.

Wouldnt think the GReddy logo would face forwards on the other two pully's and not for the power steering pully?

Either way, I think i'm going to have to pull it off on the weekend and try and sus out if it will fit on the other way round. If that doesnt work i'm hoping the old one will fit back on ok.

I'll really be in the poo if the original one does the same thing once fitted!

I have this same problem. But mine is on an R32. p/s pump pulley sits a few mm too far in and hence the belt comes off and eventually snaps/shreds. I will be fitting a spacer to rectify the problem; or the pulley could be on the wrong way around...will get to inspect mine later and see if this is true.

thanks for the reply mate....

very interesting.

Do we have them fitted wrong or is Trust wrong?

Trust is always on the money with their parts - I just cant understand how these could be the wrong fit.

It seriously does not look like it will fit the other way around though...

I have this same problem. But mine is on an R32. p/s pump pulley sits a few mm too far in and hence the belt comes off and eventually snaps/shreds. I will be fitting a spacer to rectify the problem; or the pulley could be on the wrong way around...will get to inspect mine later and see if this is true.

I had the exact same problem. Shredded p/s belts are not cool....especially if somehow they get wrapped around the clutch fan. Turns out I was sent an R33 GTR pully kit instead of an R32 one. Apparently the P/S pully needs a washer or two to push it out a millimeter or two. Driving a R32 GTR with no power steering really sux the kak!!

The Japanese stuff in kit form is unbeatable for pecision, completeness, quality, fitment etc etc. I have seen many bolt-on kits such as a Trust/GReddy intercooler kit that was a perfect fit kit with every nut, bolt, clamp, custom bracket, spacers, etc. Pity these facets don't apply here :) It is an easy fix though. ;)

The problem is caused by the harmonic balancer. Despite the car being a R33, you have a R32 balancer on there.

Only real difference is a fatter lip seperating the p/s drive pulley from alt and a/c drive pulleys, making the 32 p/s drive pulley sit forward compared to 33.

So, just space the pulley on the p/s pump forward a little, until it lines up correctly.

cheers.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...