Jump to content
SAU Community

Recommended Posts

93 R33 GTST $12000 ONO SOLD!

This is a private sale on the Sunshine Coast

I'm posting for a friend.

The car is Stock except for a cat back zorst and custom HD clutch which is 9 month old, the car is complete & running. (Currently registered & complied).

He is Selling Unregistered. And in AS IS condition.

Silver two tone in colour.

Engine and drive chain is in very good condition as are all panels and interior & trim.

(The car drives very nicely I have driven it quite a few times) the owner has been changing oil and filter every 5000k without fail there is about 80thou on the clock.

The owner just needs to get rid of it and can't afford to fix the chassis rust in it for a roadworthy. The car was purchased about 10 months ago for $21000 from a Brisbane dealer.

email me or pm and I will pass on the owners phone number.

Link to comment
https://www.sau.com.au/forums/topic/17903-93-r33-12000/
Share on other sites

to do work like that the interior will probably have to be removed to get to the chassis

but i don't imagine the work itself being that difficult...i mean it wouldn't cost that much to fix and at 12k its pretty good value (pending condition of the rest of the car)

Link to comment
https://www.sau.com.au/forums/topic/17903-93-r33-12000/#findComment-376210
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ok thanks..that was my second question if i can somehow bypass this even with Nistune(that is all i have right now...aparat from stock ECU. So with some aftemarket it can by "bypassed" or make it work?  I know there is Link or Haltech (mainly used). We have ECUmaster here so i will gather some info about it.
    • Yes. You will need to get the original boost sensor and wire it in. That is.... if you plan to use a stock ECU - even a Nistuned ECU. The Nissan ECU will not operate correctly without it connected. And yes, it will do annoying stuff like you are experiencing. You will almost certainly be better off with some aftermarket ECU, than trying to hunt down rare sensors.
    • Ok so ABS/TCS is "not" the problem. Yeah i know now about the ABS with Nistune(i told that to the Nistune guy) but iam not 100% why or why i dont have ABS. ABS cube is in the engine (always has been) but i had braked couple of times rly hard and brakes just locked and scream. Does all Skylines have ABS cube? That boost sensor https://www.sau.com.au/forums/topic/367633-wtb-r34-gtt-turbo-pressure-sensor-pics-inside/ Is this it? I need to ask but i have a picture of engine bay and i do not see that (100% is not in that place) If i do not have this the car can do what mine is?(cutting around 4000 rpm) Here is the pic of my engine bay(only one i have) BUT i think i dont have that cuz loom was used from my RB20DE NEO and i know (obviously) that it does not have boost control or any wire to that...) so maybe that is the problem? (i dont know for 100% if that car where the engine is from had that)...but i dont have the loom from that
    • I'm with you here. It's either loom has an issue, OR, injectors are not functioning properly. It could even be they're just constantly dribbling, hence the wet, but not firing.
    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
×
×
  • Create New...