Jump to content
SAU Community

Recommended Posts

Hi,

I have a automatic R32 and i few questions about boost controllers,

Would like to know if i increase the boost to say 12-15 psi will i notice my fuel usage increase at all?

And also

If i had a boost contoller with an in cabin controller would i be able to crank it up when i need the power.... then turn it down to say 5psi when i want to conserve fuel??

Anything would be appreciated.... i also found the thread about an awsome manual controller from ebay .... but it doesnt have a in cabin contoller...

Anyways thanks in advance for the tips

Edited by Epyon
Link to comment
https://www.sau.com.au/forums/topic/179155-boost-controllers/
Share on other sites

Hi,

I have a automatic R32 and i few questions about boost controllers,

Would like to know if i increase the boost to say 12-15 psi will i notice my fuel usage increase at all?

And also

If i had a boost contoller with an in cabin controller would i be able to crank it up when i need the power.... then turn it down to say 5psi when i want to conserve fuel??

Anything would be appreciated.... i also found the thread about an awsome manual controller from ebay .... but it doesnt have a in cabin contoller...

Anyways thanks in advance for the tips

in answer to your question, if your fuel consumption will increase if u use the 12-15psi(full throttle) i dont see the need to lower your boost to 5-7psi, if your using full throttle to make 5-7psi then you obviously are meaning to do it and want more power so i'd leave it set on the higher 12-15psi so when u need the power you've got it and dont need to keep changing setting, obviously when your driving around town on light throttle u dont use boost hardly at all so fuel consumption is less, once u want the power and are using 12-15psi of boost then u get the kick in the pants feel and ur tank is drained accordingly, more power=more fuel... cheers

pretty much, when u set a boost level, lets say 15psi for example. its suppose to be a max setting u want to run, now sometimes there spiking and sometimes there boost fade up in rev range but generally u can make the figure set unless theres other problems, but only time ur car will make the boost is under heavy load( full throttle) so aslong as u drive it with light to cruise throttle then your consumption of fuel shouldnt be affected too much, put your foot down and you'll know about it, stock boost is very dull after 1st gear, increasing boost is a good way to add mid-top end to it...but with this makes engine a little more thirsty... cheers

Edited by sweetr33
so if i had it running at 15psi and drove it like a grandma would i still get my 9-10 L/100km

Yes.

My car stock is around 12psi. now i have bigger turbos, higher boost, power fc and a fully rebuilt motor with forged pistons and i have better fuel economy. when i get my boost controller and up the boost to 18-20psi, i will still have the same fuel economy on the road as i drive like a grandma. you control how much fuel you use with your right foot.

Agree with everything above.

Just add that turning the boost down (you mentioned 5psi) can only go as low as what your actuator is set at, no lower.

So if it's an R32, the actuator is a 10psi job, you can add a boost controller to go up to 50psi if you have all the supporting mods but you can't go lower than 10psi

....unless you change the actuator to an R33 job which is 5psi ;)

Thats the joy of owning a turbo car.

Drive it off boost and it pretty much consumes as much fuel as any other 2.0/2.5L, but the power is there when you want it, just need to put your foot down and watch the fuel gauge droppppp! ;)

Thanks,

Abu

if u boost ur car up to 12-15psi ull have to get it tuned for high boost...therfore ur petrol consumption will suffer.

It'll only suffer when on the gas but the extra power is worth it.

If your off throttle or on light throttle, it'll be in another part of the map and should be tuned for that accordingly.

So, yeah petrol consumption can still be kept to a minimum if you wanna use it as a commuter for example.

For fuel consumption, my 165rwkws tune = my 195rwkws tune = 240 rwkws tune...... when on light throttle

I could always get close to, or on 500kms per 55-60 litres when commuting on the freeway.

But the 240 used more than the 195, which used more than the 166 when on the gas ;)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I'd be very surprised if you can buy new OEM mats. But if you can, I want some too!  Do you have links to the variations you found? Also, where are you located? I found that Nengun is happy to list items to purchase but when you do buy them you'll get an email that it's actually discontinued. As far as I know the variations in floor mats are different colour schemes as well as automatic and manual having a slightly different shape. The automatic ones fit into a manual car without issues, but I think you'd have trouble fitting the other way around. I have photos that show the shape difference if you care. FWIW I bought sets of used floor mats in decent condition at yahoo auctions.
    • Hi 🙋‍♂️. Just bought my Unicorn but the interior need some minor work so it would match my expectations ;). I noticed it is hard to get used oem floor mats in good condition so i started to dig if there's any chance to buy set of new ones. I found two websites - nengun and amayama and it looks like one can still buy factory new floor mats in Japan, but thers a small issue. Some mats (i assume genuine, oem ones) are marked as G4900 and these are "discontinued". The ones you can buy are marked as G4911 but i have no idea if these are also oem, made by other producer or some lower quality replacements that looks entirely different. Can anyone help? 😃  P.s. there is also some strange indication - 0V005, 0V015 and 0V505. Any idea what does it mean? Would appreciate any help with this 🙏
    • Hi, Marek here 🙋‍♂️. I finally fulfilled my longtime dream - recently bought Stagea and now waiting for it to arrive in Poland. There's only few of these in my country, and one of the owners  recommended mi this forum as a source of all the info i'd need since now i own one  so here i am.  
    • Version 1 aluminium airbox is.......not acceptable No pics as I "didn't like the look.....alot" Even after all my "CAD", and measurements, the leg near the fusebox just didn't sit right as it ended up about 10mm long and made the angle of the dangle look wrong, the height was a little short as well, meh, I wasn't that confident that Version 1 was going to be an instant winner I might give Version 2 another go, there's plenty of aluminium at work, but, after having in on and off a few times, and laying in the old OEM airbox without the new pod filter and MAF, there may be an option to modify the OEM air box and still use the Autoexe front cover and filter.... maybe This >  Needs to fit in here, but using the panel, and not the pod, the MAF will need to fit in the airbox though> I'm thinking as the old OEM box and Autoexe cover that is sitting in the shed is just sitting around doing nothing, and they are relatively abundant and cheap to replace if I mess it up and need another, it may well fit with some modifications to how the Autoexe brackets mounts to the rad support, and some dremiling to move it get in there, should give me some more room for activities, as I don't want to move the MAF and affect the tune Sealing the hole it requires to stick it in the air box is simple, a tight fit and some pinch weld will seal it up tight  I am calling this a later problem though
    • and it ends up being already priced in as though you're just on 91RON without any ethanol. Car will lose a bit of economy as the short and long term fuel trims bring down the AFR back to stoich or whatever it is for cruise/idle for the engine.  
×
×
  • Create New...