Jump to content
SAU Community

Recommended Posts

Ok just for your interest. Prices arent trade prices btw.

December 05 and onward Headlight Assembly is $1942+GST from Nissan for EACH headlight, including globes and wiring (no ballast resistor pack however)

Headlight body and Lense (no globes or wiring etc) is $1030ea + GST

Part No: 26025CM41A for the RHS and 26075CM41A for the LHS

Tail lights are a similar story if you want to upgrade to the nicer 06/07 model (looks so much hornier than 03!) They are $443+GST for the body and lense. you have to put in your own LEDs from you existing lights.

Part No: 26554CM41A for the RHS and 26559CM41A for the LHS

Frank, can you advise if we need to modify the wiring in any way, or is it simply plug and play? Same headlight globe size etc?

Thanks!

Jai

No modify required, simply plug and play. need a bit adjustment as those headlight come from US who is on the other side of road against us.

after installed, the right hand light is higher than the left hand, we must adjust them reversed as it may hurt the opposite driver's eyes.

Edited by Frank350GT
  • Replies 71
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Hi there!

It's and added kit I'm pretty sure, but must have been done originally as was already there, so not sure on cost either.

I do know they are HID bulbs and there are balast units behind the bumper, also looks like a wire on each side that has been cut and taped up.

I'm yet to pull it all appart and see what's going on in there.

Will let you know for sure once I know ;)

Just got the price of that HID fogs, $1000+, man , you got such a big bonus.

Why spend $3k, as Frank said , he got his headlights for $250 shipped each, surely even after you've got all the bits and pieces you are still well under that $3k mark and they look like they are in decent condition.

I'm thinking of doing the same, but I have a 6000k HID kit I bought ages ago for my other car and never used them. They are H4 which had the high and low beams in the one bulb. Don't know if and how it will fit in but I'm going to be assessing it all soon.

Actually Mine is $250 shipped a pair included the HID bulbs, I used the ballast from old light, buy new sets of turing light and parking light from AUTOBAM sydney, who over charge me a lot.

About your H4 HID, you can fit them in the FOG/High Beam in 03 light, I done it with my 03 light 1 year ago. just need to cut off 3 wire ( yellow, grey and yellow/red ) in my memory.

Actually Mine is $250 shipped a pair included the HID bulbs, I used the ballast from old light, buy new sets of turing light and parking light from AUTOBAM sydney, who over charge me a lot.

About your H4 HID, you can fit them in the FOG/High Beam in 03 light, I done it with my 03 light 1 year ago. just need to cut off 3 wire ( yellow, grey and yellow/red ) in my memory.

Frank,

where did you find the lights for $250 shipped? Do you have a link?

Actually Mine is $250 shipped a pair included the HID bulbs, I used the ballast from old light, buy new sets of turing light and parking light from AUTOBAM sydney, who over charge me a lot.

About your H4 HID, you can fit them in the FOG/High Beam in 03 light, I done it with my 03 light 1 year ago. just need to cut off 3 wire ( yellow, grey and yellow/red ) in my memory.

So normally before the compliance, is the top part of the headlight unit the FOG/high beam is it? or is it the other way round?

So normally before the compliance, is the top part of the headlight unit the FOG/high beam is it? or is it the other way round?

The top part is Low Beam, with D2R HID. The bottom part is the FOG/High Beam with H4 on 03 Headlight.

On 06 Head light, Top part is Bi-Xeon, mean Low/High beam in same lense.

Bottom part is Fog(H1) and Parking light ----a very small bulbs on corner.

Are you still looking for the exchaust???

I thing US guys get a lot of HKS, with very sexy sound.

I was looking into the HKS a little while ago, and i think my car has HICAS which means the HKS won't fit. If anyone wants one the best price I found was around $1850 USD delivered to Syd.

The guy who's looking into wheels for me is bringing in a couple of Fuji exhausts in the next few weeks so I'll wait and see how they are.

I'm also waiting on a guy in the US to get back to me on the NISMO exhaust. Hopefully will hear today.

I also found a really good deal on Borla True dual, $1050 USD delivered to Syd, but I think this is too deep for me.

Cheers

Bobby

I was looking into the HKS a little while ago, and i think my car has HICAS which means the HKS won't fit. If anyone wants one the best price I found was around $1850 USD delivered to Syd.

The guy who's looking into wheels for me is bringing in a couple of Fuji exhausts in the next few weeks so I'll wait and see how they are.

I'm also waiting on a guy in the US to get back to me on the NISMO exhaust. Hopefully will hear today.

I also found a really good deal on Borla True dual, $1050 USD delivered to Syd, but I think this is too deep for me.

Cheers

Bobby

How does Fuji sound like, In my memory it is a silent exchaust, please tell me I am wrong.

About Borla true, do you mean the sound is deep?

I should search youtube to listen to that.

Thanks

I have the borla, it sounds porn. very much makes the vq sound like a v12. c-red in perth stock a few v35 exhausts

JK

Yeah i've heard some clips and agree it sounds like an eight/12 more than a six. I spoke to C-red a while back and unfortunately the price is much higher than what i would cost from the states.

Frank - yep the fuji is quite silent. I wanna keep the same sound as stock but louder, which the fuji does in the higher revs.

C-red have the full Borla Catback instock for $1600, maybe a bit less with a cash offer! Ive had a quick look over the net and Borla online is about $1200USD without shipping, online pricing about USD$900 without shipping - but the big pain is finding a company willing to go through the hassle of shipping here. most online stores wont! And shipping would run into about $150USD-$200 depending on who you use, so thats already getting close to $1400, and thats on a good day if it slides through customs!

JK

Edited by jaik

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
×
×
  • Create New...