Jump to content
SAU Community

Recommended Posts

use the hi octane exchange sump. way better than a puny 800ml extra. ive seen bearings spin on gtrs wityh the extension. simply not enough oil.

the sump i made holds around 8.5 litres to the high mark on the stick. no surge at all as yat.

you can't use both. but for me unless you have a high volume oil pump (like tomei, trust etc) I would use the baffles.

simply because to fit the extension your sump needs to be cut in half and I have seen some welded on extensions that were done pretty poorly. and it's very important that the pick-up is sitting at the right depth inside the sump. also they hang quite low, it shouldn't be a problem, but if for instance you spun off the track backawards over a ripple strip (happend to me!) it would be in danger of getting collected. plus the extra capacity adds a lot of $$ to your oil change if you are using oil like motul chrono (which you should be).

so I reckon unless you really need extra capacity, just use the tomei baffles.

...also they hang quite low, it shouldn't be a problem, but if for instance you spun off the track backawards over a ripple strip (happend to me!) it would be in danger of getting collected.....

That's what worries me about the extensions.

well...i've had both on my race car and have seen some minor surge using the tomei style baffles - never had any sign of trouble with the trust extended sump.

but keep in mind this is on excellent tyres with great traction, right on the limit - I don't think most cars would see any difference.

re clearance I've run the extended sump on plenty of tracks including some offs and not hit it......but thats not to say it could never happen - the trust sump definately hangs lower than the subframe

well...i've had both on my race car and have seen some minor surge using the tomei style baffles - never had any sign of trouble with the trust extended sump.

but keep in mind this is on excellent tyres with great traction, right on the limit - I don't think most cars would see any difference.

re clearance I've run the extended sump on plenty of tracks including some offs and not hit it......but thats not to say it could never happen - the trust sump definately hangs lower than the subframe

Thanks for that, I do intend to run the car at the track so good to hear from someone who has tried both in those conditions

use the hi octane exchange sump. way better than a puny 800ml extra. ive seen bearings spin on gtrs wityh the extension. simply not enough oil.

the sump i made holds around 8.5 litres to the high mark on the stick. no surge at all as yat.

I'd say that has more to do with the build and not overfilling than not enough in an extended sump.

well I'm convinced. both dave and duncan I know have thought about this a lot. so I'd go with their idea. especially if you are using a nismo oil pump (not nissan N1, but actual nismo pump) as they flow a fair bit more oil than a stock pump at any given pressure.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Well, this, but braided line to the sender that is mounted on the chassis. Oil Pressure doesn't need to be close, while I prefer Oil Temp is in the active oil flow (bro science, not sure how much it matters).  That's how I've had mine set up for years and it works OK
    • Welcome back! There is a v series forum, a little quiet at times but every new active member helps
    • But, per MBS206's question, what happens when it doesn't start. When you turn the key to IGN, do the dash lights come on (then go off after a couple of seconds) - likely alarm or other electrical issue When you turn the key to STRT do you head a clear click (the starter solenoid trying) without the engine turning (likely starter motor)
    • I had 3 counts over the last couple of weeks once where i got stranded at a jdm paint yard booking in some work. 2nd time was moving the car into the drive way for the inspection and the 3rd was during the inspection for the co2 leak test. Fix: 1st, car off for a hour and half disconnected battery 10mins 4th try car started 2nd, 5th try started 3rd, countless time starting disconnected battery dude was under the hood listening to the starting sequence fuel pump ect.   
    • This. As for your options - I suggest remote mounting the Nissan sensor further away on a length of steel tube. That tube to have a loop in it to handle vibration, etc etc. You will need to either put a tee and a bleed fitting near the sensor, or crack the fitting at the sensor to bleed it full of oil when you first set it up, otherwise you won't get the line filled. But this is a small problem. Just needs enough access to get it done.
×
×
  • Create New...