Jump to content
SAU Community

Recommended Posts

  • Replies 115
  • Created
  • Last Reply

Top Posters In This Topic

BTW about 10 mins to swap them out.

You guys need to get a work ethic.

nick off geoff. ur concept of how long things take leads me to believe that either a) u dont look at the clock when u work on cars or b) u have nfi

:/

10 years as a rapid combat repair mechanic. It's training and knowledge.

People only make it hard for themselves.

Could have spent 1 hour sourcing parts, fabricating a resistor pack and fitting it. But they are better off in my race car anyway.

We have a saying. 5 minutes of thought can save many foot pounds of effort.

Sigh!. Oh well, whats another week or so. My bad, When i bought the injectors i had no intentions of running the pfc because of the price gouging that was happenning, Thanks to Mike and his old man george i got the pfc at a way good price and promptly forgot about the injector impedence.

Gotta love old brain cells. ;)

Resistor pack will not work anyway. He already has Low Impedance...you don't wanna go lower.

Sard injector collars only leak when installed incorrectly and are only used on side feed injectors. Noel has converted to top feed.

Hey Noel, does Petey's sms still apply or have you sourced the injectors you need?

BTW I decided to run the GT51R on mine now. Can't be outdone by some old codger with a large cheque book ;)

Dan low impedance is the resistor value of the injectors mate. Not enough resistor means that more current can flow through the circuit and can fry the injector drivers in the PFC, or even the stock computer so Noel is pretty lucky not to have a nasty bill as well.

I'll slap the multimeter on tomorrow and see exactly what they ar in comparison to rb26 and 25 injectors.

Dan low impedance is the resistor value of the injectors mate. Not enough resistor means that more current can flow through the circuit and can fry the injector drivers in the PFC, or even the stock computer so Noel is pretty lucky not to have a nasty bill as well.

I'll slap the multimeter on tomorrow and see exactly what they ar in comparison to rb26 and 25 injectors.

Sorry my bad.

I have had a long week.

haha...yeh you guys are suckers...as if you would work two jobs or maybe even have a hobby or two that takes up all your free time...:rofl:

Dan once i work out a sweet and easy to make dry sump pump bracket i reckon we should put abit more serious effort into this project.

I also need to work out a better way for welding the sump pan without it warping so much, but without being insanely time consuming.

We will talk in the near future mate...........ding ding ding and bling bling bling....i like the sound of money.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Pads for R32 GTS-t, R32 GT-R non V-Spec (Sumitomo), R33 GTS-t and R34 GT-t are all interchangeable. R34 GT uses a 2x piston caliper, hence it didn't fit.
    • Checked with amayama and nope, the full S2 manual set is not available anymore. Unsurprising, but still disappointing as the ? on availability gave a glimmer of hope.
    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
×
×
  • Create New...