Jump to content
SAU Community

Recommended Posts

1990 R32 GTSt Manual Skyline for sale for $12,900.

I purchased it 2 years ago from an import broker and am the first owner in Australia.

Have started full time study (again) and have a second car. Regretful sale.

  • 129,000 km's
  • Qld rego till Feb 2008
  • complete custom paint job in August 2006 (dark charcoal with gold pearl).
  • do-luck front bar
  • 600x300x100 front mount intercooler.
  • 17" gold alloy wheels with 235/45R17 fronts and 255/40R17 rears.
  • GT-R rear spoiler and side skirts.
  • lowered suspension with adjustable rear dampeners.
  • brand new 2 1/2" exhaust with custom dump pipe, high flow cat and cannon muffler fitted Aug 2006. Also replaced all exhuast manifold studs and turbo flange studs. (cost me $1700)
  • Apexi air filter
  • DBA gold slotted and cross drilled front brake rotors.
  • New front radius rod bushes fitted
  • Blitz boost guage and water temp guage mounted to drivers 'A' pillar
  • turbo timer
  • Nismo radiator cap
  • Nismo oil filler cap
  • Nismo leather gear knob
  • Hi-cas in good working order
  • Climate control in good working order and recently regassed
  • JVC MP3 CD player.
  • Engine oil changed every 5,000 km's
  • All fluids recently changed
  • Never boosted
  • Never drifted

This is not a big horse power vehicle, but have spent thousands keeping it in great condition.

Contact Gideon on 0414 299 840 or [email protected] or PM me.

DSC00896.jpg

DSC00883.jpg

DSC00892.jpg

DSC00880.jpg

DSC00877.jpg

Edited by GIDZY

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Cheers. Skyline is back on the menu, can’t get rid of it. It’s like a child you don’t want, or herpes 
    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
×
×
  • Create New...