Jump to content
SAU Community

Recommended Posts

Nice shots. Like your interior lighting theme. Well done.

Only thing I would suggest is to modify that front bar, get rid of the number plate support and the white cross piece behind it all together. That way you have a larger opening for the intercooler and would look nice and neat as well. Its just too much going on at the front with that bar if you know what I mean. Other than that I like the way you keep it stock look wise.

thanks for the kind comments guys.

And the front bar, i don't want to cut it as it's a genuine Nismo bar...but i might if i find a shop that could do a decent job.

And the 2 things above the a/c are Power Meter and Blitz SBC iD

Nice ride mate. One of the cleanest 34 gtt's I've seen too.

Thanks.

The interior has a few scratches oin it however...but it's a 10yr old import so..

I'll be searching for some interior parts though to make it look "nicer"

where did you get your dash lights change mate?they look nice

I purchased the LED's off 666DAN and installed them myself.

Pretty easy once you do it.

Nice car Paul!

Really love the interior. Was it difficult to pull the dash out to change the bulbs? How many bulbs did you change in the dash?

Dash lights r real easy to install, few screws, pop out the dash partly, change globes.

Nice engine cover Paul, hahaha...

Btw. where did u get the backlit lights for the climate control panel and was it easy to change? Mine comes green factory std, i was trying to find a blue backlit to match the rest of my blue LED dash. PM me if u can.

Cheers.

Dash lights r real easy to install, few screws, pop out the dash partly, change globes.

Nice engine cover Paul, hahaha...

Btw. where did u get the backlit lights for the climate control panel and was it easy to change? Mine comes green factory std, i was trying to find a blue backlit to match the rest of my blue LED dash. PM me if u can.

Cheers.

Yeah..nice engine cover :laughing-smiley-014:

As G_Force mentioned, dash lights are easy as well.

But it did take me about 40mins first go to do it all.

Now it takes me 10mins to change a bulb :)

The backlights i sourced off Dan and it was pretty easy to change. And trust me...if I say it's easy, anyone can do it.

Nice R34, I like the V35 rims that fill those guards nicely :P

thanks mate.

I like the rims too.

Would prefer Work SP1 or CE28N or TE37, but these will do me fine.

Loving the interior.. i was thinking of getting some lights as well.. how much did it cost? how many did you change? could anyone who's already changed the dash lights possibly show the steps to DIY?

The lights i changed myself.

Have a search for DAN666 posts for his LED's.

u need 4 for the dash and 3 for A/C + 3 for centre gauge console + 3 LED's for the LCD in A/C

Not that expensive to get the globes delivered.

Looks nice mate.

Thanks :thumbsup:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeh I think i'll message an old contact i had for ages that manages his own tyre shop now.. n tell him what i want n work with him before ordering..  Got this 17x9 +30 Driftteks on 245/45/17 PSR Drag Radials on the rear.. They fit well - for your reference in future - Rear guards  have been lipped in & minimal to non flaring of the rear Gaurds.  
    • If only it were that easy! I also needed to remove seats, shocks, brake calipers, send my car through a fence, and use measuring and ended up guessing because I didn't remove seats, shocks and brake calipers. It can be hard sometimes Can be a little more complex than 'just measure' if you want to truly measure the entire wheel through all of it's suspension travel. But if you aren't going for every last mm then yeah, you can check the space you currently have and guesstimate.
    • If you own a car, and it has wheels on it, and you know the offset of those wheels, and you have a measuring device, you have everything you need to work out if other wheels will fit.
    • Will this fit? but they are staggered set - RAYS 57DR SEMI GLOSS BLACK 18x8.5 +37 | 18x9.5 +38 5-114.3 STAGGERED SET   or If no go could just get a set 4's wheels of 18x8.5 +37 5-114.3 - would i run 8.5's 235s up front n 245's at the back if I do?   Thanks.        
    • Put a clamp on your return line. I have a feeling it's sucking air, and introducing bubbles to your fuel. With a lot of fuel, less problematic. I'd honestly be redoing all the lines in the tank and clamps on everything.   Also, you've given two different answers to the same question: Asked if being followed by the police you could get down to use the whole tank, you said yes you could, so long as you keep off boost. However, you then followed this up that free revving, it would also cause the issues. I'm doubting free revving is enough to make any noticeable boost on what is likely a decent sized turbo.   So now I have to ask, can you actually drive it lightly and use all the fuel, or does it break up even free revving? Also, have you put a fuel pressure gauge on it? Can you hear the pump change noise at all when you're having this issue?
×
×
  • Create New...