Jump to content
SAU Community

Recommended Posts

  • Replies 44
  • Created
  • Last Reply

Top Posters In This Topic

What like a gti golf?

Id prob go the new volvo over the XR5 tho. Just a little bit more different, little more sleeper appeal.

I'd compare it to something like an EVO VI with full exhaust, its very very close to the EVO VI in term of response.

i rather a TypeR civic though handling wise.

Its has masive brake and handle alright too, though the TYPE R cost much more isn't it?

that's cause evey man and his dog with an evo or wrx will rape it for a year or 2 then sell it before something breaks, like the gearbox, which they seem to be really good at breaking. i know a wrx that is on it's 3rd box.

wrx's and xr6t's are 2 cars i wouldn't own second hand, unless the first owner was an old fart.

yeah i would take the mazda or ford over the astra. i don't like the styling. but both the ford and the holden have the issue of the wiper and indicator stalks being on the opposite sides, which pisses me off no end.

yeah i would take the mazda or ford over the astra. i don't like the styling. but both the ford and the holden have the issue of the wiper and indicator stalks being on the opposite sides, which pisses me off no end.

Yeah they are nice, but after sitting in both the MPS and the XR5, they left me feeling abit cold, especially the MPS. There wasnt really that much that made it look different to the normal Mazda 3. At least the XR5 has real nice recaro seats in it. But I guess its personal preference.

yeah i would take the mazda or ford over the astra. i don't like the styling. but both the ford and the holden have the issue of the wiper and indicator stalks being on the opposite sides, which pisses me off no end.

so you basing a good portion of your decision on the placement of the steering column configuration?

... i like it

I'd compare it to something like an EVO VI with full exhaust, its very very close to the EVO VI in term of response.

Its has masive brake and handle alright too, though the TYPE R cost much more isn't it?

In relation to the first point, I'm guessing you have driven both to be able to make this statement. It seems unlikely to me though. The Ford as tested by Motor did a 7.4 secs to 100km/h and 15.2 over the quarter. These don't even come close to that of an Evo. I understand that the evo is 4wd which helps with the launch though not that much.

The new Civic Type R is $39,990 before on road costs.

All these new turbo hot hatches feel fast to those who have a skyline where the real power kicks in high up in the rev range. They come across as being responsive and quite punchy. For instance the Ford's peak turbo kicks in at 1,600 revs and is a not to be sneezed at 320nm. Compare that to the stock R33 GTST which had around 270nm (or 290nm depending on where you look) at 4,800 rpm from memory.

I drove the Mazda 3 MPS and was very impressed by the acceleration. I certainly didn't walk away wanting one though. Firstly the styling is a bit bland inside and out. Secondly there was no sense of occasion. The car didn't seem pure or have spirit.

No doubt these cars are pretty quick and would probably beat my R33 turbo around a track though I will save my money for something else.

Edited by Smurf
it takes bigger balls and more skill to drive a fwd car hard. nothing like having to fight the steering wheel in a straight line as well as round corners.

You think so? I find it the opposite. I haven't driven a super high powered FWD yet and had to deal with major torque steer in a straight line, but then a high powered RWD will start stepping the tail out if you put too much power down and it starts to spin.

A FWD car is generally predictable. It will almost always understeer. And that's always easier to drive around, because all you have to do is modify your pedal inputs instead of having to steering and throttle modulation....and if you exceed the grip limits (no matter for what reason) the car will do the same thing.

In relation to the first point, I'm guessing you have driven both to be able to make this statement. It seems unlikely to me though. The Ford as tested by Motor did a 7.4 secs to 100km/h and 15.2 over the quarter. These don't even come close to that of an Evo. I understand that the evo is 4wd which helps with the launch though not that much.

The new Civic Type R is $39,990 before on road costs.

All these new turbo hot hatches feel fast to those who have a skyline where the real power kicks in high up in the rev range. They come across as being responsive and quite punchy. For instance the Ford's peak turbo kicks in at 1,600 revs and is a not to be sneezed at 320nm. Compare that to the stock R33 GTST which had around 270nm (or 290nm depending on where you look) at 4,800 rpm from memory.

I drove the Mazda 3 MPS and was very impressed by the acceleration. I certainly didn't walk away wanting one though. Firstly the styling is a bit bland inside and out. Secondly there was no sense of occasion. The car didn't seem pure or have spirit.

No doubt these cars are pretty quick and would probably beat my R33 turbo around a track though I will save my money for something else.

Kind of make sense mate BUT,

Evo VI regardless still a secondhand car, if not has been trashed badly from Japan so the condition will never be the same where the XR5's test is latest and realistic. Offcourse Evo will be faster but i said the responsive almost felt the same.

I've never actually get to driven the MPS but Mazda has good reputation too so i won't doubt that it won't be good either.

As for skylines, i think i know them pretty well, in fact i LOVE it :(, i had a 13s R33gtst for over 3years, then an 11sec R32 gtr for 3 years as well and both time are on street tires too. Nothing beat a straight SIX in top end.

For some reason, i still don't believe that the XR5 clock a 15.2 over the quater because my little Starlet Gt hit a 15.8 with just cat back zorst and the XR5 definately felt much faster than my Starlet, just a thought though.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Even more fun, leave all the ADAS stuff plugged in, but in different locations, hopefully avoid any codes!   And honestly, all these new cars with their weird electronics. Pull all the electronics out Duncan, and just shove an aftermarket ECU and if needed a trans controller in, along with a PDM. Make it run basic but race car styled!
    • To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
×
×
  • Create New...