Jump to content
SAU Community

Recommended Posts

My parkers circuit keeps blowing fuses, from what i can work out, the following source power through that particular fuse:

- front parkers

- rear tail light parkers

- dash illumination

- radio illumination wire

- beeper under dash when door is open, or lights left on

- somehow the interior light is also effected, as now when it is set to door, it stays on all the time.

The fuse is under the bonnet, even blows 25amp fuses, so something is trying to suck a lot of current. I've tried to inspect front parker globes, no visual shorts. Removed dash cluster, still blowing fuses. Checked radio illumination wire, taped up well. Checked one brake light, visually ok. Hard to check the other light.

Any ideas? All help greatly appreciated!

Edited by Trav33
Link to comment
https://www.sau.com.au/forums/topic/181489-parkers-circuit-keeps-blowing-fuses/
Share on other sites

Not really, it happened the same day i washed my car at a car wash, but i think that was coincidental.

I might trace the wiring from the tail lights back to the front of the car to make sure it hasnt been damaged.

The number plate light is also powered through the Parkers fuse, ive unplugged the lights in case they filled up with water when i was washing my car, but still blowing fuses.

Does anyone have a link to a full wiring diagram for 33's?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...