Jump to content
SAU Community

Recommended Posts

  • Replies 80
  • Created
  • Last Reply

Top Posters In This Topic

rofl, another BOV thread.

Stock one:

Car won't stall

Car won't backfire

Cops won't defect you

You'll drive around and sound normal

After Market Vent to the atmosphere, whooshspinning twirly hurricane attention attracting one:

Cops will defect you

Cops will go harder on "jap" cars because you're another person with a big loud whoosh, trying to be a dickhead

Car will stall

Car will backfire

Car will blow flames, cops will defect you

Chicks will hear it, get instantly wet, and come running at your car wanting sex

Everyone around you will immediately think your cool and want to be your friend

You'll foul your spark plugs

bwahahahahahahahahahahahahaha

i want aftermarket BOV now

for teh sex

:laughing-smiley-014:

I jus ran down to kfc and asked habib bro, its a mad speshal bov called a dose bov uleh.

Oh the HKS DOSE SSQ BOV.

Yeh my cousin had one of those on his ET Turbo bro.

Fkn sickkkkkk shhhhhhhhhhhhduuuuuuuuududuuuuduuuuuuuduuu :)

Thanks,

Abu

Edited by abu
have u got proof backing up all those claims????

Almost for all claims

cops WILL defect you regardless of stock bov if they wanted to, when i had a atmo bov i did not have problems stalling, or shooting flames, or being defected.

If they defect my stock BOV - I'll take the ticket to The Department of Transport, along with my Engine manual and show them its from the factory. They can't defect it if its from the factory. Period.

if ur gonna be a dickhead shooting your BOV every gear down every street passing every person, expect to get it.

Why else would you put an aftermarket one on? 90% of people that put them on have a standard car, and want attention. I have a 300rwkw car.. I don't want attention! Plus I like my car to run correctly. These people have no idea that it f**ks the AFM readings up and richens your mixtures.

Did you also know that a BOV sucks air in on idle? Stick your finger in there next time its idling. Also, there is no filter on this air.. So its dirty, and destroying your engine.

Oh, and you say "just tighen it up"

Whats the point of running one if its too tight to vent, and doesn't vent until 9,000rpm? Ah thats right, the tighter it is, the louder the whoosh when it actually does open eh?

but if ur smart about it (not making the bov crome so it stands out in the engine baY) and driving normally. its fine

Not really. The Copper still heard it and wants to know what it was, and will assume you have one, and defect you. Even if its painted black, and mounted between your balls, and he can't see it, he still heard it.

Overall - go for it mate! Fully sick uleh.

The chicks will want your cock immediately.

wow.. another thread where knobhead comes in blabbing his mouth about how atmo bovs are good and have a place in society.

f*k off Andru.. go make a fool of yourself on another forum.

how many have you been laughed out of now?

5?

6?

11ty?

Soo you dont like atmo bov's? ;)

They are ok, depending on what application.

Wrong application - If you have a stock car, and just want to sound like a dickhead, attract attention, and give Jap imports a bad name, and think you're going to pick up chicks.

Did you also know that a BOV sucks air in on idle? Stick your finger in there next time its idling. Also, there is no filter on this air.. So its dirty, and destroying your engine.

Oh, and you say "just tighen it up"

Whats the point of running one if its too tight to vent, and doesn't vent until 9,000rpm? Ah thats right, the tighter it is, the louder the whoosh when it actually does open eh?

Not really. The Copper still heard it and wants to know what it was, and will assume you have one, and defect you. Even if its painted black, and mounted between your balls, and he can't see it, he still heard it.

Overall - go for it mate! Fully sick uleh.

The chicks will want your cock immediately.

lol say wat u want but i know when i had my atmo bov it ran fine without suckn any of that bs air ur talkn about.

wow.. another thread where knobhead comes in blabbing his mouth about how atmo bovs are good and have a place in society.

f*k off Andru.. go make a fool of yourself on another forum.

how many have you been laughed out of now?

lol mate have another cry, u cry in this thread you cry in the other one. you talk so much shit seriously, ur argument is that atmo bov are absolutely uselss which they aint, they might not suit ur needs but not everyone is a tosser who hangs shit on other peoples cars because they run a atmo bov.

u got a car man? you got anything to show. i sure hope u do, cuz it would be a shame for someone to come on here dissing everyone else but at the end of the day hasnt even got anything to drive himself let alone bag others.

They are ok, depending on what application.

Wrong application - If you have a stock car, and just want to sound like a dickhead, attract attention, and give Jap imports a bad name, and think you're going to pick up chicks.

thats my whole point, the dickhead above is trying to prove that the things are absolute junk. like the mafia said, right app for the right bov. thats my hole argument.

i even run a stock bov myself.....but that dosnt mean i hate atmo ones

Edited by R34NRG

so basically you have no actual facts about why they are good?

you just have lame insults to people who tell you how it is?

answer the question little boy..

why do you think that atmo bovs are usefull for a street car that already had a plumback bov and AFM setup?

Stop talking shit about "peoples taste" and crap.

answer the f*king question.

so basically you have no actual facts about why they are good?

you just have lame insults to people who tell you how it is?

answer the question little boy..

why do you think that atmo bovs are usefull for a street car that already had a plumback bov and AFM setup?

Stop talking shit about "peoples taste" and crap.

answer the f*king question.

u got a car man? you got anything to show. i sure hope u do, cuz it would be a shame for someone to come on here dissing everyone else but at the end of the day hasnt even got anything to drive himself let alone bag others.

i didnt get a answer there mate? ill give u another chance.

and sorry i proberly missed this aswell, who said anything about atmo BOVs for road cars? i didnt....did u?

I was just wondering. With the stock BOV i can hear the woosh noise a bit when i change gears etc but its seems to be muffled quite a bit. I was just wondering, if you replaced the stock BOV for a aftermarket type one such as the Gready RS type BOV with plumb back fittings etc and have it connected up like the stock one, would there be any increase in BOV noise.

I dont mind a bit of woosh like some of us here but i dont want to be rediculously loud and i do want to stay legal. Thats why i will only consider plumb back BOV's if i where to change mine. I want to be able to hear the BOV working while i am in the car. So loud enough to hear inside. I am not interested in impressing the "CHIX" etc like above msgs. You should do things for you so you like it, not what others like.

Anyways what do ya think. Would a aftermarket plumb back BOV produce a bit of an increase in noise for the driver of the car.

Cheers

i didnt get a answer there mate? ill give u another chance.

and sorry i proberly missed this aswell, who said anything about atmo BOVs for road cars? i didnt....did u?

Yes I have a car.

yes it has a stock bov.

yes it works like it's supposed to.

You dick head.

this whole thread is about a guy asking about a HKS SSQV for his car.

Mafia pointing out all the points why he shouldn't have an atmo bov in his own way and your reply was all fluffy.

oh it's a personal choiec, oh it's usefull.

here is your dumarsed reply from the other thread.

some like the performance they give (and dont say there isnt any gain in using a atmo bov cuz there is)

so explain yourself.

explain this "performance" atmo bovs give over a plumback

I was just wondering. With the stock BOV i can hear the woosh noise a bit when i change gears etc but its seems to be muffled quite a bit. I was just wondering, if you replaced the stock BOV for a aftermarket type one such as the Gready RS type BOV with plumb back fittings etc and have it connected up like the stock one, would there be any increase in BOV noise.

I dont mind a bit of woosh like some of us here but i dont want to be rediculously loud and i do want to stay legal. Thats why i will only consider plumb back BOV's if i where to change mine. I want to be able to hear the BOV working while i am in the car. So loud enough to hear inside. I am not interested in impressing the "CHIX" etc like above msgs. You should do things for you so you like it, not what others like.

Anyways what do ya think. Would a aftermarket plumb back BOV produce a bit of an increase in noise for the driver of the car.

Cheers

open up your air filter box.

once you remove the air filter, you will find there is some foam insert in the box somewhere.

this muffles it all down.

remove that.

put the air filter back on and go test it out.

if you want even more noise, you will need to get a free flowing panel filter like K&N or trust etc.

or you could get a pod filter instead of the air box but that is illegal is most states and it's a backward step in performance.. (even though you will think it is going faster due to all the extra noise)

Yeah i have already removed that foam padding in the airbox. I have brought a K&N panel filter already too. I did notice gains in induction noise. Sounds better now. A bit more psshhhhhtt wouldn't go astray. I am hoping that a aftermarket BOV might just give me a little more noise. I dont want it very loud tho for people on the streets to hear.

Might see if can borrow something off a friend to test out.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Apologies for the long post, but needed somewhere to lay out the entire timeline of events and actions taken:   I've got an 89 GTR with a R34 RB in it. It's been running great all year, driven probably 500KM in the last month. It's not my daily driver, just a weekend fun car.    Build info: R34 RB26 - HKS 2.7 stroker kit, HKS adjustable cam gears, HKS turbo upgrades, Trust intercooler, R34 factory DENSO 440cc injectors, JUN chipped/tuned R32 ECU. All of this work was performed in Japan back in 2019.    Thursday 10/2/25 - It's a nice day and decided I'll drive it to work, I start it up in the garage and I notice it took a few extra cranks and sounded a bit funny. I figure maybe it was just because it was a pretty chilly morning. I pull it out into the driveway to warm up a bit before leaving. As I leave the driveway, it feels very off and sounds like a misfire. I pull it back in the garage to deal with after work and take the daily to work. I was able to diagnose it as a cylinder 5 misfire with the old spark plug test (unplugging each plug until a sound change with the engine running). I take off the whole ignition system, ignitor, plugs, spark. *Important note, it is still on the R32 ignition system with the separate ignitor system. I test each system with a multi-meter and nothing presents as a smoking gun. I put it all back together and it starts up no issue. I go ahead and order the PRP R35 ignition conversion kit. It should arrive today (10/13/25)   Friday 10/3/25 - Another nice day, car starts up great and drives great all day. Very pleased that everything seems to be OK   Sunday 10/5/25 - Decided I'll take it to play some golf, load up and drive to the course about 25 minutes away. Drives wonderful the whole way there, I pull in the parking lot and the engine completely comes to a stop. I do not recall if it sputtered at all, but just remember all of the sudden the engine was off. I roll it into a parking spot, try to crank it back on and nothing.  It'll crank and crank and not even try to start. End up getting it towed back to my house and push it up into the garage.    Items I have checked: Fuel in the tank Fuel Pump relay Fuel pump fuse  Spark Plugs & gap Coil packs Ignitor    I know the cylinders are getting fuel as the plugs smell like fuel after a start attempt. I tried spraying starter fluid into the manifold and cranking and not even a sputter.    I decided to do the live CAS test (removing the the CAS, ignition on and spinning the CAS stalk to see if the injectors pulse and spark is active). All of the injectors were pulsing and I have spark at the plug. The half-moon end of the CAS did seem very loose, I'm not sure how much play is supposed to be there, but it was more than I expected. There was no in/out play of the shaft, just the tip end that is pinned on had quite a bit of play.    CAS Play video   When I put the CAS back in, I stupidly did not re-time the engine. I know I need to do that tonight, however, I do not think it will start given it seemingly was not the issue. My plan is to do the PRP R35 coil kit and retime the engine at the same time.    I plan on ordering the Haltech Nexus Plug-in ECU once they are available again, but ideally would like to get this sorted before firing the parts cannon at it and potentially adding more variables.    Anything glaring that I am missing here, I'm a bit at a loss?          
    • Get it on a dyno. Get something logging Consult. Run it up and find out what is causing it.
    • Looking for a plenum for rb25 de+t neo  Not looking to push much power maybe 300kw at the wheels, is there much difference in flow for Freddy “Greddy style” compared to original Greddy or options like Proflow or Otaku garage?    I won’t be porting the de Neo head for now as I think it’ll be fine 280-300rwkw but appreciate the help and any experiences anyone has between them and any advice. Thanks  Looking at this plenum for now below 
    • engine wise almost no mods: stock ecu Greddy front mount intercooler Greddy forward facing intake w R33 TB stock fuel system, stock injectors, rail etc. Kakimoto racing hyper 3 inch exhaust system Apexi intake filter New NGK –R BCPRES (.8 gap) plugs  
    • Nice one @Pac - looks like a fair few 1600's there! 
×
×
  • Create New...