Jump to content
SAU Community

275-300kws

Adz2332

By Adz2332,
in Engines & Forced Induction

 Share

Recommended Posts

Adz2332 Grand Master

Adz2332

Posted
Posted (edited)

Have unfortunalty done the sums and cant afford the GTR 33 i was looking at so to drown my sorrows im thinking of upgrading my GTST series 2 33 abit....

My mods so far include -

- Power FC & Controller

- Fuel Pump

- Full Turbo back stainless steel 3inch exhaust

- big front mount

- pod

- new big radiator

- just over 200 kws at the wheels.

I was talking to shaun at boostworxs and he says with the current set up has pretty much maxed out the turbo...

So im looking for a new turbo. I dont wanna spend a fortune, was looking at slides turbos but i reali want 275 or closer to 300kws at the wheels and i dont think they will cut it....

Its a daily driven car so i want minimal turbo lag also....

Any suggestions?

Ill also get 555c injectors when i get the turbo probably deauchwirks ones

anything else i have over looked that i should upgrade??

Thanks

Adam

Edited by Adz2332
Link to comment
https://www.sau.com.au/forums/topic/181715-275-300kws/
Share on other sites
joeyjoejoejuniorshabadoo Grand Master

joeyjoejoejuniorshabadoo

Posted
Posted (edited)

afm, clutch, flywheel, possibly coils, and alot of people will suggest suspension.

personally i wouldn't put stock internals through more than 260ish

Edited by joeyjoejoejuniorshabadoo
Link to comment
https://www.sau.com.au/forums/topic/181715-275-300kws/#findComment-3299978
Share on other sites
Adz2332 Grand Master

Adz2332

Posted
  • Author
Posted
very expensive.....thats why im selling up and bought a 32 gtr

haha yer i was thinking of doing that and go to a GTR 33 but cant quite afford it... And i think the 32gtrs are getting abit old... dont want a heap of problems

Link to comment
https://www.sau.com.au/forums/topic/181715-275-300kws/#findComment-3300011
Share on other sites
joeyjoejoejuniorshabadoo Grand Master

joeyjoejoejuniorshabadoo

Posted
Posted

When the new turbo goes on in a month, i'm not going over 260, although i probably wont be able to get her much further anyway on a gtrs setup...

250 to 270 seems to be the accepted limit round these parts...

Link to comment
https://www.sau.com.au/forums/topic/181715-275-300kws/#findComment-3300015
Share on other sites
Adz2332 Grand Master

Adz2332

Posted
  • Author
Posted
When the new turbo goes on in a month, i'm not going over 260, although i probably wont be able to get her much further anyway on a gtrs setup...

250 to 270 seems to be the accepted limit round these parts...

cheers for that

Link to comment
https://www.sau.com.au/forums/topic/181715-275-300kws/#findComment-3300035
Share on other sites
Lithium Grand Master

Lithium

Posted
Posted
whats a standered GTR r32 run in kws?

kw only tell part of the story - even R32 GTRs are a LOT heavier than the 25t, so that effects power/weight and the fact that the engines are similar size means there is a huge difference in the effective power delivery. I am running pretty much the same turbo on my 25 as Cubes is and I haven't been in a GTR running stock twins that pulls as hard as my 25t does.

Link to comment
https://www.sau.com.au/forums/topic/181715-275-300kws/#findComment-3300138
Share on other sites
Adz2332 Grand Master

Adz2332

Posted
  • Author
Posted
kw only tell part of the story - even R32 GTRs are a LOT heavier than the 25t, so that effects power/weight and the fact that the engines are similar size means there is a huge difference in the effective power delivery. I am running pretty much the same turbo on my 25 as Cubes is and I haven't been in a GTR running stock twins that pulls as hard as my 25t does.

damn this is hard and a confusing decision......

i like the idea of awd and the fact its a gtr...

i want the fastest car i can get in the 1/4 mile, and i have the choice out of around 220kw gtr or around 260kw gtst 33...

Link to comment
https://www.sau.com.au/forums/topic/181715-275-300kws/#findComment-3300195
Share on other sites
Lithium Grand Master

Lithium

Posted
Posted
damn this is hard and a confusing decision......

i like the idea of awd and the fact its a gtr...

i want the fastest car i can get in the 1/4 mile, and i have the choice out of around 220kw gtr or around 260kw gtst 33...

In my opinion a 260rwkw GTS25t on a set of MickyT ET Streets would rape an 220wkw R32 GTR down the 1/4.

Link to comment
https://www.sau.com.au/forums/topic/181715-275-300kws/#findComment-3300491
Share on other sites
Elliotws Contributor

Elliotws

Posted
Posted

i have the same problem, the gtr is superior in every way to the gst-s rb25. i want a gtr, so to kill that urge ive just got a hks gt30r stuck on my gts-t r33. apparently they pulled over 300rwkw with mine, but il be limiting that to 270-280. obviously the complete fuel system is upgraded ect.

Link to comment
https://www.sau.com.au/forums/topic/181715-275-300kws/#findComment-3301190
Share on other sites
Adz2332 Grand Master

Adz2332

Posted
  • Author
Posted
i have the same problem, the gtr is superior in every way to the gst-s rb25. i want a gtr, so to kill that urge ive just got a hks gt30r stuck on my gts-t r33. apparently they pulled over 300rwkw with mine, but il be limiting that to 270-280. obviously the complete fuel system is upgraded ect.

yer i dunno im leaning towards to the gtr 32

Link to comment
https://www.sau.com.au/forums/topic/181715-275-300kws/#findComment-3301278
Share on other sites
Elliotws Contributor

Elliotws

Posted
Posted

yeah i love the look and the performance of the 32 gtr, it seems like its 15-20years ahead of time, but it seems to hard to find one that hasnt had the absolute crap thrashed out of it. im sure there may be some decent ones out there. all the best with the 32 search. i would swap my car for a decent 32 gtr any day.

Link to comment
https://www.sau.com.au/forums/topic/181715-275-300kws/#findComment-3301775
Share on other sites
wizlb Proficient

wizlb

Posted
Posted

Hey ADZ

I just completed my upgrade.

I was able to get 261rwkw without spending 4k for a turbo.

This is how I look at it.

Keep the GTST for a year or more and then trade it in for GTR-33.

The GTST will hold more value as a performance car then a 200KW car.

IF you own your GTST then just trade it now and get a loan for 15k to 20K.

Link to comment
https://www.sau.com.au/forums/topic/181715-275-300kws/#findComment-3301798
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      PXL_20250828_063541093.TS.mp4
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • PranK
      R35 GT-R production ends after 18 years

      By PranK · Posted

    • SteveL
      Leak from Tokico BM50 Brake Master Cylinder

      By SteveL · Posted

      I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
    • sunsetR33
      Unpeeling the Orange

      By sunsetR33 · Posted

      EMU Classic. For what I need it to do I see no reason to upgrade. Link and Haltech would both cost an extra chunk of money for a lot of unutilized features
×
×
  • Create New...