Jump to content
SAU Community

Recommended Posts

hey i got quite a few ppl coming this sunday.

craig - wrx

jodi - vl

Fab - r34

Mac - 300zx

Nate - s14

Bau - r32

Matt - Monaro

Oscar - r32 gtr

James - r33

Luke - r34

Dallin - Type R

David - evo 9

chris - s13

Kenny - r32

ben - r33 gtr hasnt replied yet

Thats the list i have now.. hopefully we can get more ppl to come..

Edited by thrustt
hey bro how u goin so wat times u reackon ur gona run i got my car booked in on friday night for a dyno run so wat power do u think i will be looking at mods r

greedy pro spec 2 boost controller low is at 6 psi and high at 13.9

exedy 3 puk clutch

locked diff

intercooler

3'' zaust turbo back

and bald tyers :D

and i think that it for now

and if anyone needs paint work dun pm me i got a shed to work in now im a deadly painter honest

In melb hit low 13s. hopefully with the new setup. breaking in the mid to high 12s.

I think with those mods 190-200rwkw.. rough estimate.

let me know how u go

Edited by thrustt
hey i got quite a few ppl coming this sunday.

craig - wrx

jodi - vl

Fab - r34

Mac - 300zx

Nate - s14

Bau - r32

Matt - Monaro

Oscar - r32 gtr

James - r33

Luke - r34

Dallin - Type R

David - evo 9

chris - s13

Kenny - r32

ben - r33 gtr hasnt replied yet

Thats the list i have now.. hopefully we can get more ppl to come..

Also if their cars are up to it:

Brian - R33

Eryne - RX7

to easy chris see u all sunday hey i wanna start goin to the drags to see wat times i can run should i drive with traction control on or off if i hav it off she sits there and spins but if on i get a good launch but fuel cuts out and all this other shit wen changing gears

Edited by fab34

Hey all can't make it out to the drags gettin my car ready as a decent cruiser going to be painting it bought a new Drag Carbon Spoiler on monday and later on i'll be putting in L24 (E) Single Turbo with Manual Gearbox should be cool see yas on the next cruise or somethin

hey guys i will be out there but not driving not in the mood 2 be laughed at cos i miss a gear or whatever lol but ill come for a look

PUSSY!!!!!!!!!!!!! :D

If I can give it a shot so can you.. It will be my first run too, so you better!!!

better to do it now than on an official meet..

Who cares if you miss agear man, i'm just gunna take it easy and get a feel..

Cya there

PUSSY!!!!!!!!!!!!! :domokun:

If I can give it a shot so can you.. It will be my first run too, so you better!!!

better to do it now than on an official meet..

Who cares if you miss agear man, i'm just gunna take it easy and get a feel..

Cya there

Everyone should give it a go on Sunday.

It will be the first run for most of us including me.

Hopefully there will be not too many spectators, so if anyone stuffs up it won't be a shame job.

Finally registered my Datto today, on the road at last!

post-44657-1205508633_thumb.jpg

post-44657-1205508678_thumb.jpg

hey got the dyno run on friday night got 250 hp/185kw at the wheels on low boost whitch is 7 psi still got to tune the high boost but should be able to get to the 200kw mark at the treads camelo reackons wen tuned proply on 12-13psi

hey everyone,

drags was awesome on the weekend. good work on the people that got in and gave it a go. craig was kind enough to lend me his wrx for a few runs which was good fun (even if i missed 3rd racing MFP).

MFP: i love your car man. was good racing you

if anyone wants a car let me know..... the SIL80 is going on the market

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I'm looking for some real world experiences/feed back from anyone who has personally ran a EFR7670 with a 1.05 exhaust housing or a .83 I'm leaning towards the .83 because its a street car used mostly for spirited driving in the canyons roads. I"m not looking for big numbers on paper. I want a responsive powerband that will be very linear to 8000 rpm. I dont mind if power remains somewhat flat but dont want power to drop off on top. The turbo I've purchased is a 1.05, although the mounting flange T3 vs T4 and internal vs external waste gates are different on both housings, I not concern about swapping parts or making fabrication mods to get what I want. Based on some of the research I've done with chat gpt, the 1.05 housing seems to be the way to go with slightly more lag and future proofing for more mods but recommends .83 for best response/street car setup. AI doesn't have the same emotions as real people driving a GTR so I think you guys will be able to give me better feed back 😀   
    • Surely somebody has one in VIC. Have you asked at any shops?  Is this the yearly inspection or did you get a canary?
    • This is where I share pain with you, @Duncan. The move to change so many cooling system pieces to plastic is a killer! Plastic end tanks and a few plastic hose flanges on my car's fail after so little time.  Curious about the need for a bigger rad, is that just for long sessions in the summer or because the car generally needs more cooling?
    • So, that is it! It is a pretty expensive process with the ATF costing 50-100 per 5 litres, and a mechanic will probably charge plenty because they don't want to do it. Still, considering how dirty my fluid was at 120,000klm I think it would be worth doing more like every 80,000 to keep the trans happy, they are very expensive to replace. The job is not that hard if you have the specialist tools so you can save a bit of money and do it yourself!
    • OK, onto filling. So I don't really have any pics, but will describe the process as best I can. The USDM workshop manual also covers it from TM-285 onwards. First, make sure the drain plug (17mm) is snug. Not too tight yet because it is coming off again. Note it does have a copper washer that you could replace or anneal (heat up with a blow torch) to seal nicely. Remove the fill plug, which has an inhex (I think it was 6mm but didn't check). Then, screw in the fill fitting, making sure it has a suitable o-ring (mine came without but I think it is meant to be supplied). It is important that you only screw it in hand tight. I didn't get a good pic of it, but the fill plug leads to a tube about 70mm long inside the transmission. This sets the factory level for fluid in the trans (above the join line for the pan!) and will take about 3l to fill. You then need to connect your fluid pump to the fitting via a hose, and pump in whatever amount of fluid you removed (maybe 3 litres, in my case 7 litres). If you put in more than 3l, it will spill out when you remove the fitting, so do quickly and with a drain pan underneath. Once you have pumped in the required amount of clean ATF, you start the engine and run it for 3 minutes to let the fluid circulate. Don't run it longer and if possible check the fluid temp is under 40oC (Ecutek shows Auto Trans Fluid temp now, or you could use an infrared temp gun on the bottom of the pan). The manual stresses the bit about fluid temperature because it expands when hot an might result in an underfil. So from here, the factory manual says to do the "spill and fill" again, and I did. That is, put an oil pan under the drain plug and undo it with a 17mm spanner, then watch your expensive fluid fall back out again, you should get about 3 litres.  Then, put the drain plug back in, pump 3 litres back in through the fill plug with the fitting and pump, disconnect the fill fitting and replace the fill plug, start the car and run for another 3 minutes (making sure the temp is still under 40oC). The manual then asks for a 3rd "spill and fill" just like above. I also did that and so had put 13l in by now.  This time they want you to keep the engine running and run the transmission through R and D (I hope the wheels are still off the ground!) for a while, and allow the trans temp to get to 40oC, then engine off. Finally, back under the car and undo the fill plug to let the overfill drain out; it will stop running when fluid is at the top of the levelling tube. According to the factory, that is job done! Post that, I reconnected the fill fitting and pumped in an extra 0.5l. AMS says 1.5l overfill is safe, but I started with less to see how it goes, I will add another 1.0 litres later if I'm still not happy with the hot shifts.
×
×
  • Create New...