Jump to content
SAU Community

Recommended Posts

The none V-spec car says 95 model and the dash is 95 model ( series I) but she has as eries II steering wheel..

V-specs command a higher price ( very little) and maybe easier to sell, I have owned both in stock and modified form and I can tell you there isn't much difference, Just buy the better car .

A coulpe notable differences , V-spec has a finned diff and ALSD lights up in the dash, a lot of other little things but harder to notice .

Good luck with whatever car you buy , check it out well by someone that knows GTRS . Be very careful there are lots of cheap GTR'S out there but I'm sure you will have to pay good money for a good car .

We just sold one for much more than double the asking price of these cars ( yea it was a 33).

Victory, all imported cars have questionable k's regardless of what type of cluster they have, unless you know the history of them with books , auction papers etc...but you will NOT find many like that in Australia and when you do you think wow that has to many k's on the clock so you then buy the one with 20 or 40 something that has actualy done 120-140 or even 240 .

I agree with wrxhoon and ferni. Buy the better condition car. If you are going to give it a hiding at the track then get the non v-spec as the active rear diff will eventually give you grief of the expensive kind. The non v-spec diff is a loosely setup 2-way LSD that works fine, almost as well as the Nismo one way in my race car.

If it was a 32 or 34 then I would suggest the v-spec due to the very real benefits and get a proper diff later, but for the sake of a sticker and some extra technology that is of no benefit and some stiffer but old and tired suspension then the choice is clear.

Not convinced? Do a search on ALSD and v-spec diff and see who is after a new one or the problems they have had.

Thanks for the info.

I've been in two minds about the non vspec car shown as members have suggested the headlights are from a sedan and the steering wheel is series 2. This leads me into thinking it could have had a heavy front on collision at some stage and possibly deployed the airbag.

Just had a look and one is from UPI. Did some business with them and it's seen some time at Racepace as well so could be worth a close look. Get it inspected first and that may make the decision.

The other would be nice but purple only looks good with TE37s, right Andrew? (ferni) :):yes:

I have to agree, the wheel choice could have been better.

Another thing with the grey car that concerned me is that it is running HKS 264's on a stock ecu. Does anyone else see this as an issue as i would expect to lean things out a little?

Also, i have posted the vins of each car to be fasted as the link to download software is down. Does anybody have the software that can check the vins for me. It would be much appreciated as i am actually checking these cars out this weekend.

Edited by fieds83

Well, i ditched both of the orginal cars that i was looking at as there were too many inconsistancies.

Last night i bought a 11/96 build R33 GTR non V spec in totally stock showroom condition. Only mod is a cat back exhaust, i bought the car from a young guy who just could not afford to own a GTR and had it sitting in his garage doing nothing. It has a clearly genuine 77,000kms, the interior looks as though noone has ever sat in the car. Body is perfectly straight, paint flawless and mechanically perfect. I really could not ask for more and you do have to pay for a good car.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi all, Long time since I've posted here. Looking for some advice on what I can remove to further identify the cause of my issues.  I can move the passenger seat forward and back but the knob used to adjust the seat angle is pretty much free spinning, there's very little resistance.  Removing the side cover I can see that the chain is intact but the shaft for the adjustment spins without the gear attached to it moving.  What's my next step for disassembly here? Is this a common fault? Just being a little cautious as I didn't want to start removing bolts for a spring to fly out or something equally as stupid.  Cheers
    • Those above shitboxes, mediocre and above usually have a turbo strapped to them, hence the slightly higher octane is required.  
    • Hi all,   long time listener, first time caller   i was wondering if anyone can help me identify a transistor on the climate control unit board that decided to fry itself   I've circled it in the attached photo   any help would be appreciated
    • I mean, I got two VASS engineers to refuse to cert my own coilovers stating those very laws. Appendix B makes it pretty clear what it considers 'Variable Suspension' to be. In my lived experience they can't certify something that isn't actually in the list as something that requires certification. In the VASS engineering checklist they have to complete (LS3/NCOP11) and sign on there is nothing there. All the references inside NCOP11 state that if it's variable by the driver that height needs to maintain 100mm while the car is in motion. It states the car is lowered lowering blocks and other types of things are acceptable. Dialling out a shock is about as 'user adjustable' as changing any other suspension component lol. I wanted to have it signed off to dissuade HWP and RWC testers to state the suspension is legal to avoid having this discussion with them. The real problem is that Police and RWC/Pink/Blue slip people will say it needs engineering, and the engineers will state it doesn't need engineering. It is hugely irritating when aforementioned people get all "i know the rules mate feck off" when they don't, and the actual engineers are pleasant as all hell and do know the rules. Cars failing RWC for things that aren't listed in the RWC requirements is another thing here entirely!
    • I don't. I mean, mine's not a GTR, but it is a 32 with a lot of GTR stuff on it. But regardless, I typically buy from local suppliers. Getting stuff from Japan is seldom worth the pain. Buying from RHDJapan usually ends up in the final total of your basket being about double what you thought it would be, after all the bullshit fees and such are added on.
×
×
  • Create New...