Speedo Not Working

[Stage2]

Hi people, well yesturday i removed my cluster to get rid of the speed alert box thingy and changed some lights while i was at it then put it all back together. then a few hours later i went to take it for a drive and all seemed fine for the first 5-10min,, then all of a sudden i realised my speedo wasnt working but i was sure it was when i first took off.

Then when i hit a turning point i realise my power steering wasnt working. I also have a greddy turbo timer which tells me the speedo reading in digital and thats wasnt showing anything either.

My factory boost gauge isnt working either but i dont really care abt that as it only reads in mmg or whatever and i can just get a boost gauge down the track but no speed reading or power steering is pretty fu*kd up.

When i removed the cluster again i notice a plastic bit hanging out of the speedo which wasnt there before so i tried to stick it back in but the mddle bit of the plastic kept going back into the outer part of the plastic so i stuck it back into the speedo cable in which that didnt push the middle part of the plastic back out so i guess nothing is moving the speedo.

So now the plastic is freakn stuck in the speedo cable and i dont know what to do.... is the plastic bit suppose to come off like that? or have i Fu*kd it? Some answers would be appreciated.... thank Q

[blind_elk]

You have most probably not put the cable into the back of the speedo correctly. Or you've broken the end of the cable inner.

The speedo sends a signal to the P/S system so it knows how much assistance to apply. If there is no speed, then no assistance is required.