Jump to content
SAU Community

Recommended Posts

Hey guys, I have sold the GTR and I have a few bits and pieces left over. None of them will fit on my Porsche so I'm having a fire sale:

* R33 GTR injectors (came off Series 3 with about 45,000kms) - $290

* R33 GTR center gauges - $145

* R33 GTR guage cluster (under 50,000kms) - $265

* R33 GTR AFM's - $180

* R33 GTR FPR - $25

* Nissan clutch slave cylinder - $55

* Nismo ceramic clutch for R33GTR (plenty of meat). These are meant to be rated at about 450ps from memory but it numerous low 11 second drag runs at 125mph, so I dare say the car was making a tad more than 450ps. Complete with clutch plate, pressure plate and release bearing - $250

* R33 GTR release bearing (only done 3000kms, changed it because my new gearbox came with a new one) - $45

* RB26 head bolts full set with washers. Only used for dummy assembly - $95

* RB26 main bolts. Brand new, removed from my NISMO GT block - $65

* RB26 oil squirters. Complete with bolt/valve - $95

* Standard RB26 camshafts - $90

* R33 steering column shrowd. Excellent condition - $40

* R33 drivers side kick panel - $30

* RB26 oil pump (came off Series 3 with about 45,000kms) - $190

* RB26 head gasket, genuine nissan - $85

* RB26 misc gaskets, manifold, plenum, exhaust manifold, turbo etc. Tell me what you need and make an offer

Tomei oil restrictor (brand new in packet) - $25

R33 GTR ECU - $150

GTR Turbos - $290 pair

GTR dumps - $50 pair

GTR manifolds - $100 pair

RB26 solid valve lifters - $100 full set of 24

6 stock RB26 pistons - perfect condition - $150

Edited by Mik
  • Replies 45
  • Created
  • Last Reply

Top Posters In This Topic

Have you still got the clutch? very interested, where are you located?

In Sydney Hills area, clutch is still here .

Mik is very busy today .

Sorry...no coil pack harness

New parts added:

Tomei oil restrictor (brand new in packet) - $25

R33 GTR ECU - $150

GTR Turbos - $290 pair

GTR dumps - $50 pair

GTR manifolds - $100 pair

RB26 solid valve lifters - $100 full set of 24

6 stock RB26 pistons - perfect condition - $150

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Cheers. Skyline is back on the menu, can’t get rid of it. It’s like a child you don’t want, or herpes 
    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
×
×
  • Create New...