Jump to content
SAU Community

Recommended Posts

Hey guys, I have sold the GTR and I have a few bits and pieces left over. None of them will fit on my Porsche so I'm having a fire sale:

* R33 GTR injectors (came off Series 3 with about 45,000kms) - $290

* R33 GTR center gauges - $145

* R33 GTR guage cluster (under 50,000kms) - $265

* R33 GTR AFM's - $180

* R33 GTR FPR - $25

* Nissan clutch slave cylinder - $55

* Nismo ceramic clutch for R33GTR (plenty of meat). These are meant to be rated at about 450ps from memory but it numerous low 11 second drag runs at 125mph, so I dare say the car was making a tad more than 450ps. Complete with clutch plate, pressure plate and release bearing - $250

* R33 GTR release bearing (only done 3000kms, changed it because my new gearbox came with a new one) - $45

* RB26 head bolts full set with washers. Only used for dummy assembly - $95

* RB26 main bolts. Brand new, removed from my NISMO GT block - $65

* RB26 oil squirters. Complete with bolt/valve - $95

* Standard RB26 camshafts - $90

* R33 steering column shrowd. Excellent condition - $40

* R33 drivers side kick panel - $30

* RB26 oil pump (came off Series 3 with about 45,000kms) - $190

* RB26 head gasket, genuine nissan - $85

* RB26 misc gaskets, manifold, plenum, exhaust manifold, turbo etc. Tell me what you need and make an offer

Tomei oil restrictor (brand new in packet) - $25

R33 GTR ECU - $150

GTR Turbos - $290 pair

GTR dumps - $50 pair

GTR manifolds - $100 pair

RB26 solid valve lifters - $100 full set of 24

6 stock RB26 pistons - perfect condition - $150

Edited by Mik
  • Replies 45
  • Created
  • Last Reply

Top Posters In This Topic

Have you still got the clutch? very interested, where are you located?

In Sydney Hills area, clutch is still here .

Mik is very busy today .

Sorry...no coil pack harness

New parts added:

Tomei oil restrictor (brand new in packet) - $25

R33 GTR ECU - $150

GTR Turbos - $290 pair

GTR dumps - $50 pair

GTR manifolds - $100 pair

RB26 solid valve lifters - $100 full set of 24

6 stock RB26 pistons - perfect condition - $150

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...