Jump to content
SAU Community

Recommended Posts

Im proud to say this is my first post on SAU, unfortunatly its not a happy one.

I scored myself a 1989 R32GTR for a reasonable price. I absolutely love the thing and im not ashamed to say im obsessed with it. Any noise or feeling out of the ordinary i would have it checked out.

That being said i even have sleepless nights over it!!!!

I have been reading alot of articles about the dreaded Engine Rebuilds and on average people are spending between $10,000 to $12,000.

What are people doing to get to that point!!! I mean my engine is completely stock and never been on the track (as far as i know). Its clocked up 148,000kms and still runs fine except for a gearbox whine which im checking out soon.

Do i need to concern myself with such news?

I would love peoples opinions about my concerns, im pretty sure people would share the same.

Link to comment
https://www.sau.com.au/forums/topic/182739-should-i-keep-an-89-r32-gtr/
Share on other sites

From what I can gather from reading this forum and other info on the www is that people have an engine failure withing 6 months or so of owning it.

If your carefull and take care of your car there isnt any reason that your engine will not make it to 300,000k's or beyond

if your car is running stock boost, it will probably run for ever. Its only when you start upping the boost and other things that shorten the engine life. Engine rebuilds are not cheap, especially if you want to get a good job done. And then you'll start saying 'well, as long as the engine is out, might as well do the turbos and the rest' ... viola, $12k :)

Dont modify it, you generally wont have a problem. :)

Its when people try to chase every poofteenth of a kilowatt with the stock turbos, or lean heavily on stock motors (over 300rwkw) that you are going to have issues.

One turbo dies (generally rear), and then the motor goes along for the ride due to dust.

Or other issues surrounding oil pumps etc etc.

If the car is not over boosted, serviced regularly and not driven like you've stolen it. Then you really have nothing to worry about.

I would confirm it has had the 100k service. This is critical to change the oil/water pumps and idler bearings which are all common fail points.

Mate, I've got an '89 R32 GTR with just as many k's, making 250rwkw on 1bar. Fresh-ish stock turbos however.

Anyway,it's going strong and hopefully will for a little while yet - fingers crossed. But if it breaks, i'll deal with it.

I don't spend my time worry about it - takes the enjoyment out of actually having/driving the thing.

Like others have said if you keep it stock, and treat it well, there is no reason why it'll need a rebuild anytime soon.

And this may or may not help but Redline lightweight shockproof does wonders for tired GTR boxes - maybe it'll prolong the life of it a bit while you save some pennies.

$10K - $12K rebuilds are due to people going "well.. it's already apart, might as well do this and might as well do that."

In all honesty, if your car is stockish, and you're use for it is street use, and the turbo fails and the engine goes, you could get away with fixing it for alot less than the figures you read.

example from Nismoid...

your rear turbo blows, ceramic exhaust wheel dust goes in to the engine, resulting in low compression on the rear cyclinders.

so you're up for a rebuild and a pair of turbo's.

You can pick up a pair of R34 GTR turbo's for about $700.

yes they still have a ceramic rear wheel but they are about 10 years newer, and also ball bearing.

You can have your engine rebuilt using stock cast pistons instead of fancy forged gear.

while it's apart, change the wear and tear things, like water and oil pumps, timing belt, idler, gaskets and seals etc.

you could have the car back on the road and running like new for about $5K - $6K.

and you have new turbo's, no oil leaks, no exhaust leaks, even compression etc.

don't lose sleep.

and if it ever breaks and needs a rebuild, and the car is only STREET DRIVEN, do a standard rebuild and don't start saying "well since it's already apart, might as well......."

that's where it doubles in cost.

Im in the same boat. Ive got a r32 gtr with about 130'000 kms and i have stressed about the cost of rebuilds and whatever. But really, its been 1.5 years now and its been the most reliable car ive owned. Sure some stuff needs attention like the CV boots and other stuff that gets old but mechanically its been great and never left me on the side of the road like the r31 i had.

If like me you want to be sure about things.. id do the following.

Get some redline oil in the gearbox and change all fluids, use decent engine oil.

Compression test.

Change the turbos if you really want to be sure they are in good nick.

Clean injectors

New fuel pump

Install a reliable oil pressure guage

Get your Air/fuel mixtures checked on a dyno

And i too am a believer that any RB engine is good for over 300'000 if taken care of.

Should you keep it? sure! r32 gtr is such a good bit of kit. preventative maintenance can save you the big bucks.

good post hazerb30

Prevention is the key. New parts like fuel pumps and AFR readouts can prevent these nasty failings that lead to a rebuild in the first place due to owners neglecting to upkeep the car in great condition.

Look after her and she'll look after you haha

don't lose sleep.

and if it ever breaks and needs a rebuild, and the car is only STREET DRIVEN, do a standard rebuild and don't start saying "well since it's already apart, might as well......."

that's where it doubles in cost.

well that just makes me depressed... again haha

and its not double the cost, its more like triple

Its really funny,everyone has a 130,000 km gtr32(89) LOL.

Let me see....20 years old....divided by 130,000....6500KM's per year....

Let me do the calculations again...yes.....6500kms a year. :blink: <I believe in him too.

Fuel pumps,oil pumps and all the other things discused on this Forum just don't give up

at 130,000 Kms...wake up and smell the roses boys.

OK..fun stuff over...

Drive the car until its motor dies.......it is more cheaper fixing it once than fixing things so it does not die.

But if you want:

Get all your oils replaced...gear/box ,engine,brake etc etc.......use the one's mentioned in this forum that have

made people happy.

Change your fuel pump,timing belt and turbo's.....not to ceramic second hand ones...you have no idea how many k's they have done either...

My thoughts on Turbo's...throw them out after 100,000..in your case..you are at least 30000 overdue..

Buy -7 or -9's in the garrett...bolt on and don't look back

Happy motoring.

-9s?

Thought you were an advocate for -5s Tekin :O

Yes I am Trav..like most with them bolted on... :blink: .

But then again...I have upgraded nearly everything.

Stock Engine and no supporting mods.....-5's will be an overkill.

My 89 shitter has got service history every year since 50'000kms... so yeh. legit Km's. It may all be in jap and i cant read a word of it but at least i know its 130k :)

So yeh.. your wrong. im sure im not the only one

Since 50K...what did it do between 0 to 50K :D ...200K.

If your service history is lost or began at 50K...they have tampered with the books.

If you have your service history of the car since new...stamped and written in the owners manual

then you might be right....I have a mechanic that can stamp a few services in with made up odometer readings.

Anyway,good luck with your car and keep up the services if you intend to drive it daily.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I thought that might be the case, thats what I'll start saving for. Thanks for the info 
    • Ps i found the below forum and it seems to be the same scenario Im dealing with. Going to check my ECU coolant temp wire tomorrow    From NICOclub forum: s1 RB25det flooding at start up Thu Apr 11, 2013 7:23 am I am completely lost on this. Car ran perfectly fine when I parked it at the end of the year. I took the engine out and painted the engine bay, and put a fuel cell with an inline walbro 255 instead of the in tank unit I had last year. After reinstalling everything, the engine floods when the fuel pump primes. if i pull the fuel pump fuse it'll start, and as soon as I put the fuse back in it starts running ridiculously rich. I checked the tps voltage, and its fine. Cleaned the maf as it had some dust from sitting on a shelf all winter, fuel pressure is correct while running, but wont fire until there is less than 5psi in the lines. The fuel lines are run correctly. I have found a few threads with the same problem but no actual explanation of what fixed it, the threads just ended. Any help would be appreciated. Rb25det s1 walbro255 fuel pump nismo fpr holset hx35 turbo fmic 3" exhaust freddy intake manifold q45tb q45 maf   Re: s1 RB25det flooding at start up Fri Apr 12, 2013 5:07 am No, I didn't. I found the problem though. There was a break in one of the ecu coolant temp sensor wires. Once it was repaired it fired right up with no problems. I would have never thought a non working coolant temp sensor would have caused such an issue.
    • Hi sorry late reply I didnt get a chance to take any pics (my mechanics on the other side of the city) but the plugs were fouled from being too rich. I noticed the MAF wasn't genuine, so I replaced it with a genuine green label unit. I also swapped in a different ignitor, but the issue remains. I've narrowed it down a bit now: - If I unplug and reconnect the fuel lines and install fresh spark plugs, the car starts right up and runs perfectly. Took it around the block with no issues - As soon as I shut it off and try to restart, it won't start again - Fuel pressure while cranking is steady around 40 psi, injectors have good spray, return line is clear, and the FPR vacuum is working. It just seems like it's getting flooded after the first start I unplugged coolant sensors to see if its related to ECU flooding but that didnt make a difference. Im thinking its related to this because this issue only started happening after fixing coolant leaks and replacing the bottom part of the stock manifolds coolant pipe. My mechanic took off the inlet to get to get to do these repairs. My mechanics actually just an old mate who's retired now so ill be taking it to a different mechanic who i know has exp with RBs to see if they find anything. If you have any ideas please send em lll give it a try. Ive tried other things like swapping the injectors, fuel rail, different fuel pressure regs, different ignitor, spark plugs, comp test and MAF but the same issue persists.
    • My return flow is custom and puts the return behind the reo, instead of at the bottom. All my core is in the air flow, rather than losing some of it up behind the reo. I realise that the core really acts more as a spiky heatsink than as a constant rate heat exchanger, and that therefore size is important.... but mine fits everything I needed and wanted without having to cut anything, and that's worth something too. And there won't be a hot patch of core up behind the reo after every hit, releasing heat back into the intake air.
    • There is a really fun solution to this problem, buy a Haltech (or ECU of your choice) and put the MAF in the bin.  I'm assuming your going to want more power in future, so you'll need to get the ECU at some stage. I'd put the new MAF money towards the new ECU. 
×
×
  • Create New...